Motorola Elite User manual

Introduction ...............................................................4

Essential Information...........................................6

Package Content Options..................................11

Phone Overview ................................................12

Preparing Battery for Initial Use ........................16

Attaching the Battery.........................................17

Removing the Battery........................................17

Basic Operation ......................................................19

Turning Phone On.............................................19

Turning Phone Off .............................................21

Signal Strength Indicator...................................21

Battery Level Indicator.......................................22

Internal E•P™ Rapid Charger ...........................23

Placing a Telephone Call...................................25

Ending a Telephone Call....................................25

Automatic Redial ...............................................26

Answering Calls.................................................27

Unanswered Call Indicator ................................28

Volume Controls ................................................29

Super Speed Dial ..............................................30

Turbo Dial..........................................................30

Scratchpad Memory ..........................................30

Display Last Ten Numbers Dialed.....................31

Advanced Information ............................................33

Main Menu Overview.........................................33

Phone Book ......................................................37

Recall by Name.........................................38

Recall by Memory Location.......................40

Store a Phone Number and Name............42

Pause Dialing/Memory Linking..................47

Calling Card Dialing...................................50

Edit a Memory Location.............................55

Display Own Phone Number.....................60

Number Preference...................................61

Call Timers ........................................................63

Display Individual Call Timer.....................63

1

MICRO T•A•C ELITE

Introduction

Basic

Operation

Advanced

Information

Accessory

Options Reference

Resettable Timer .......................................64

Cumulative Timer.......................................65

To Reset Timer ..........................................66

Automatic Display of Individual Call Timer...67

One Minute Audible Timer (optional).........68

Programmable Repeating

Audible Timer (optional) ............................69

Programmable Single

Audible Timer (optional) ............................71

Tone Control .....................................................73

Ringer or Vibrator Selection......................74

Select Ringer Style....................................76

Keypad Tones............................................78

Scratchpad Tones......................................79

Reminder Beeps (optional)........................80

Lock/Security Features .....................................82

Theft Alarm................................................82

Automatic Electronic Lock.........................84

Manual Electronic Lock .............................85

Emergency Call.........................................86

Secure Options Sub-menu........................88

View Lock Code ....................................89

Change Lock Code................................91

Service Level.........................................92

Master Reset.........................................95

Master Clear..........................................97

Phone Options ................................................100

Change Telephone Number.....................100

System Mode...........................................102

Feature Review .......................................105

Call Options Sub-menu ...........................106

PIN Code Activation ............................107

Delayed Call Placement (optional)......109

Call Receive (optional).........................111

Automatic Hands-Free.........................112

Multiple Key Answer ............................113

Automatic Answer................................115

2

Battery Options Sub-menu ......................116

Voice Operated Transmission

(VOX) (optional)...................................117

Extended Talk......................................118

System Options Sub-menu......................119

Display System Identiﬁcation (SID).....120

Message..........................................................122

Answering Machine Sub-menu ...............122

Play New Message(s) .........................124

Play All Messages...............................127

Play Greeting Announcement..............130

Record Greeting Announcement.........131

Answering Machine Options....................133

Select Answering Machine and

DTMF Callback Message....................134

Set Number of Rings

for Answering Machine........................137

Answering Machine Speaker Control..139

Digital Message Sub-menu .....................141

DTMF Callback Message....................142

Accessory Options ...............................................146

Batteries...........................................................146

Desktop Chargers............................................148

Travel Charger.................................................153

Miscellaneous Accessories..............................154

Reference ..............................................................157

The Cellular System........................................157

Service Area....................................................157

Weak Signal Alert............................................157

Roaming ..........................................................158

Switchhook and Enhanced System Services..159

Troubleshooting...............................................159

Index................................................................160

Patent Information...........................................163

3

MICRO T•A•C ELITE

Introduction

The MICRO T•A•C ELITE represents the state-of-the-

art in personal cellular telephones today. The listing

below shows just a few of the exceptional features

that the MICRO T•A•C ELITE telephone contains.

•VibraCall™ on select models

•Answering machine on select models

•Headset jack for Hands-Free operation on select

models

•Internal E•P™ Rapid Charger

•User-friendly icon-driven menu interface

•Dedicated battery level indicator

•Dedicated signal strength indicator

•Two-line (seven characters each) dot matrix LED

display

•99 memories

•Turbo Dial™ (nine one-touch speed dial locations)

•‘Pager-like’ feature on select models

•Displayed and audible call timers

•Two-system registration

Remember, these are just a few of the great features

that your MICRO T•A•C ELITE provides to meet your

business and personal needs. In addition, a number

of accessory options are available to help you tailor

your cellular system to your individual preferences.

These include special accessories just for your

vehicle, items to make traveling with your phone

easier than ever, battery chargers that will get you

going in a ﬂash and more.

To cover all these features properly, we will take you

through a logical step-by-step learning process that

explains everything you need to know about using your

4

Introduction

new telephone. For easy reference the tabs at the edge

of the manual mark the different categories into which

the telephone’s features have been grouped. To help

you become familiar with your telephone’s features, we

suggest that you experiment with them as you progress

through this manual. However, before you begin, please

read the following safety information before operating

your new MICRO T•A•C ELITE cellular phone.

5

MICRO T•A•C ELITE

Introduction

General Precautions and Safety

IMPORTANT

Read This Information Before Using Your

MICRO T•A•C ELITE Personal Cellular Telephone

First introduced in 1984, the hand-held portable cellular

telephone is one of the most exciting and innovative

electronic products ever developed. With it you can stay

in contact with your ofﬁce, your home, emergency

services, and others.

For the safe and efﬁcient operation of your phone,

observe these guidelines.

Your cellular telephone is a radio transmitter and

receiver. When it is ON, it receives and also sends out

radio frequency (RF) energy. The phone operates in the

frequency range of 824 MHz to 894 MHz and employs

commonly used frequency modulation (FM) techniques.

When you use your phone, the cellular system handling

your call controls the power level at which your phone

transmits. The power level can range from 0.006 of a

watt to 0.6 of a watt.

Exposure to Radio Frequency Energy

In 1991, the Institute of Electrical and Electronics

Engineers (IEEE), and in 1992, the

American National Standards Institute

(ANSI), updated the 1982 ANSI Standard

for safety levels with respect to human exposure to RF

energy. Over 120 scientists, engineers and physicians

from universities, government health agencies and

industry, after reviewing the available body of research,

developed this updated Standard. In March, 1993, the

U.S. Federal Communications Commission (FCC)

proposed the adoption of this updated Standard.

Essential Information

6

Introduction

The design of your phone complies with this updated

Standard. Of course, if you want to limit RF exposure

even further than the updated ANSI Standard, you may

choose to control the duration of your calls and operate

your phone in the most power efﬁcient manner.

Efﬁcient Phone Operation

For your phone to operate at the lowest power level,

consistent with satisfactory call quality, please observe

the following guidelines:

If your phone has an extendible antenna, extend it fully.

Some models allow you to place a call with the antenna

retracted. However, your phone operates more

efﬁciently with the antenna fully extended. Hold the

phone as you would any other telephone. While

speaking directly into the mouthpiece, position the

antenna up and over your shoulder.

Do not hold the antenna when the phone is “IN USE.”

Holding the antenna affects call quality and may cause

the phone to operate at a higher power level than

needed.

Antenna Care and Replacement

Do not use the phone with a damaged antenna. If a

damaged antenna comes into contact with the skin, a

minor burn may result. Replace a damaged antenna

immediately; take your phone to a qualiﬁed service

center for repair.

Use only the supplied or approved antenna. Non-

approved antennas, modiﬁcations, or attachments could

impair call quality, damage the phone, and violate FCC

regulations.

7

MICRO T•A•C ELITE

Introduction

Batteries

CAUTION: All batteries can cause property damage,

injury or burns if a conductive material, such as jewelry,

keys or beaded chains, touches exposed terminals. The

material may complete an electrical circuit (short circuit)

and become quite hot. Exercise care in handling any

charged battery, particularly when placing it inside your

pocket, purse, or other container with metal objects. To

protect against a short circuit when the battery is

detached from the phone, your batteries contain internal

short circuit protection and are packed in a protective

battery cover; please use this cover for storing your

batteries when not in use.

Driving

Check the laws and regulations on the use of cellular

telephones in the areas where you drive. Some

jurisdictions prohibit your using a cellular telephone

while driving a vehicle. Even if your jurisdiction does not

have such a law, we strongly suggest that, for safety

reasons, the driver use extreme caution when operating

the cellular telephone while the vehicle is in motion.

Always obey them. Also, when using the phone while

driving, please:

•give full attention to driving,

•use hands-free operation, if available, and

•pull off the road and park before making or answering

a call if driving conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF

energy. However, RF energy from cellular telephones

may affect inadequately shielded electronic equipment.

RF energy may affect improperly installed or

inadequately shielded electronic operating and

entertainment systems

in motor vehicles. Check with the manufacturer or its

representative to determine if these systems are

8

Introduction

adequately shielded from external RF energy. You

should also check with the manufacturer of any

equipment that has been added to your vehicle.

Consult the manufacturer of any personal medical

devices (such as pacemakers, hearing aids, etc.) to

determine if they are adequately shielded from external

RF energy.

Turn your phone OFF in health care facilities when any

regulations posted in the areas instruct you to do so.

Hospitals or health care facilities may be using

equipment that could be sensitive to external RF energy.

Aircraft

Turn your phone OFF before boarding any aircraft.

•Use it on the ground only with crew permission.

•Do not use it in the air.

To prevent possible interference with aircraft systems,

U.S. Federal Aviation Administration (FAA) regulations

require you to have permission from a crew member

to use your phone while the plane is on the ground.

To prevent interference with cellular systems, FCC

regulations prohibit using your phone while the plane

is in the air.

Children

Do not allow children to play with your phone. It is not a

toy. Children could hurt themselves or others (by poking

themselves or others in the eye with the antenna for

example). Children also could damage the phone, or

make calls that increase your telephone bills.

Blasting Areas

To avoid interfering with blasting operations, turn your

unit OFF when in a “blasting area” or in areas posted:

“Turn off two-way radio.” Construction crews often use

remote control RF devices to set off explosives.

9

MICRO T•A•C ELITE

Introduction

Potentially Explosive Atmosphere

Turn your phone OFF when in any area with a

potentially explosive atmosphere. It is rare, but your

phone or its

accessories could generate sparks. Sparks in such

areas could cause an explosion or ﬁre resulting in bodily

injury or even death.

Areas with a potentially explosive atmosphere are often,

but not always, clearly marked. They include fueling

areas such as gas stations; below deck on boats; fuel or

chemical transfer or storage facilities; areas where the

air contains chemicals or particles, such as grain, dust,

or metal powders; and any other area where you would

normally be advised to turn off your vehicle engine.

Do not transport or store ﬂammable gas, liquid or

explosives in the compartment of your vehicle which

contains your phone or accessories.

Vehicles using liqueﬁed petroleum gas (such as

propane or butane) must comply with the National Fire

Protection Standard (NFPA-58). For a copy of this

standard, contact the National Fire Protection

Association, One Batterymarch Park, Quincy, MA

02269, Attn: Publication Sales Division.

10

Introduction

NOTE

Accessories packaged with your phone may vary.

Telephone

Standard Battery

Hands-Free

Earpiece and

Microphone

Cigarette Lighter

Adaptor

IU

NS

Rm

MICRO T•A•C ELITE

IntelliCharge

E•P Desktop Rapid

Charger

TM

Package Content Options

11

MICRO T•A•C ELITE

Introduction

IU

NS

Rm

MICRO T•A•C ELITE

Phone Overview

12

Introduction

a Retractable Antenna

Extend for optimum performance.

b Headset Jack (on select models)

c Earpiece

d Status Indicators

Flash or light steadily to alert you to different

conditions.

IU

(In Use) - Flashes while a call is in progress.

NS

(No Service) - Flashes if the unit is beyond the

range of a cellular service area. Lights steadily

while the phone is off but directly connected to an

external charging unit (Ultra Saver II or AC power

supply). While lit, calls cannot be placed or

received.

Rm

(Roam) - Indicates when phone is accessing a

service area outside of your home system. Flashes

slowly if phone is roaming on a home type system,

and ﬂashes quickly if phone is roaming on a non-

home type system.

e Alphanumeric Display

(Two-Line, Seven-Character)

Displays phone number, name, memory location

number, help and other messages. Some

information will require viewing sequentially

displayed messages.

f Battery Level Indicator

Lights to indicate the amount of charge remaining

in your battery. The greater the number of

segments lit, the greater the capacity remaining in

your battery. A lighted battery icon only (no bar

segments) indicates a low battery. The battery level

indicator will display any time a key is pressed or

the ﬂip is opened. The battery level indicator ﬂashes

when the internal charger is charging the attached

battery.

13

MICRO T•A•C ELITE

Introduction

Due to the nature of many batteries, your battery

could remain at charge level 3 for most of its cycle,

and then quickly pass through levels 2 and 1

before turning off.

NOTE

For details on how the battery meter

operates with certain accessory batteries, see the

Batteries section on page 146.

g Signal Strength Indicator

Lights momentarily and then ﬂashes to indicate the

signal strength. The higher the level of LEDs

displayed, from 0 (no signal) to 5 (strongest), the

better the chances of successfully making and

receiving calls. Indicator will light momentarily any

time a key is pressed or the ﬂip opened.

h Menu Icons

Your MICRO T•A•C ELITE Cellular Phone has an

icon-driven menu interface. Six icons appear at the

bottom of the display and can be highlighted to

access sets of menu features:

ˆ Phone book features (recall, store, and edit

numbers in memory).

˜ Call timer features.

¯ Ringer and keypad tone features.

˘ Lock and dialing restriction features.

¸ Phone, call, battery, and system options.

˝ Message service features and digital

answering machine on select models.

i Alphanumeric Keypad

Dials phone numbers, programs features, or scrolls

through the menu.

14

Introduction

j Function Keys

‰ Recalls stored number entries.

Ø Used to store to memory locations. When in

the Menu Features, this key may be used to

select or turn on features.

Á (on select models) Used as Ø above,

also used to retrieve messages from the

internal answering machine.

Ç Removes characters from display. When in

the Menu Features, this key may be used to

turn off features.

Í Places or answers calls.

∏ Turns the phone on and off.

Ï Used to enter Menu Feature Selection.

Å Accesses memory or Menu Features.

´ Ends calls or exits features.

k Mouthpiece Flip

Open to receive a call, close to end a call.

l Volume Controls

Controls volume level.

m Connector Port (bottom back of phone)

Provides the connection for the charger, vehicular

accessories, and data accessories.

15

MICRO T•A•C ELITE

Introduction

The Nickel Cadmium, Nickel Metal Hydride or Lithium

Ion battery supplied with your telephone must be fully

charged before placing your phone into service. The

batteries are shipped from the factory in a discharged

state in order to extend the life of the battery. It is

recommended that you charge new batteries

overnight, but not longer than 24 hours, using a

Motorola-approved charger. For optimum

performance, we recommend you use Motorola-

approved batteries, chargers, and other accessories

with your phone.

Motorola desktop chargers for the MICRO T•A•C

ELITE line of products are dual pocket chargers. The

charger’s front pocket can charge a battery while

attached to the phone or charge a battery on its own.

The charger’s rear pocket will charge any size battery

by itself. See Accessory Options on page 146 for

additional detailed information on the various chargers

and charging times.

WARNING

Battery may explode if disposed of in ﬁre.

CAUTION

To avoid damage to the batteries, do not

place them anywhere that might cause the battery

terminals to short together.

Preparing Battery for Initial Use

16

Introduction

1. Place the

battery on the

phone so that

its grooves

align. Align

the top of the

battery with

the line on the back of the phone

right below the arrows

(approximately 1" from top of

phone). When properly aligned, the

battery will fall into the grooves.

2. Slide upward in the direction of the

arrows on the back of the phone

until it clicks into place. Do NOT

attempt to slide battery on from

bottom of phone.

Standard Method

1. Turn your telephone off.

2. Depress the latch button on the rear

of the battery while sliding the

battery pack downward until it

stops.

3. Lift the battery off.

Removing the Battery

Attaching the Battery

17

MICRO T•A•C ELITE

Introduction

Quick Change Battery Removal/Replacement

The quick change method

allows you to remove your

telephone battery at any time

and replace it with a charged

spare battery during a

telephone call.

This is especially useful if

you receive the low battery

warning, ﬂashing battery symbol, or audible tone

during a call. Simply remove the battery from the

telephone, put on the spare battery, and press ∏.

This will return you to your telephone call. The phone

will not go through the normal start-up self tests

described on page 19. You will have only three

seconds to complete this action before your telephone

call is terminated. It is a good idea to practice this

procedure a few times before using it on an actual

call. Advise the party on the other end of the call

before beginning this procedure.

18

Introduction

Basic Operation

1. Extend antenna for optimal

performance.

2. Press ∏ once.

3. Check the status indicators and

display messages before placing a

call.

on

will display, and both the battery level and signal

strength indicator will be active. If

Locked

displays,

enter your three-digit unlock code. (See View Lock

Code on page 89, Change Lock Code on page 91,

Automatic Electronic Lock on page 84, and Manual

Electronic Lock on page 85 for more information.)

Start-Up Self Tests

Each time the telephone is turned on, it performs a

series of self tests, sounds a tone, and vibrates, if the

phone has the VibraCall™ feature and it is selected,

and lights all display positions, status indicators and

menu icons to check their operation. The keypad,

signal strength indicator, and battery level indicator

will light, as they will any time a key is pressed, the

mouthpiece ﬂip is opened, or either volume button is

pressed.

Turning Phone On

19

MICRO T•A•C ELITE

Basic

Operation

If no key is pressed within eight seconds:

•The display will blank to conserve the battery level.

•The keypad backlight will extinguish to conserve the

battery level.

•The signal strength indicator will continually ﬂash up

to the strongest level available, instead of displaying

it constantly.

Your MICRO T•A•C ELITE cellular phone provides

you with menu access to features which allow you to

view your own telephone number and switch to your

second phone number, if so equipped. Additionally,

you may lock your phone to prevent unauthorized

use.

For more information on these features, see:

Display Own Phone Number on page 60,

Change Telephone Number on page 100,

Automatic Electronic Lock on page 84, and

Manual Electronic Lock on page 85.

•

If your phone is programmed

for two cellular systems, one of

these messages will display

upon power up.

•

These are reminders as to

which system and phone

number are currently in use.

(See page 100 for more

information.)

•

Indicates that the phone has

been locked and cannot place

or answer calls until unlocked.

(Emergency Dial will allow for

calls to be placed while locked.)

B1

B2

A2

A1

Locked

ExplanationMessage

20

Basic

Operation

Page is loading ...

Motorola Elite User manual

This manual is also suitable for

Motorola Elite User manual

Related papers

Other documents