Behringer TN6232 Specification

Category
Musical Equipment
Type
Specification

This manual is also suitable for

Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor
TN6232
Features Product Overview
The TN6232 professional dual-channel feedback
suppression processor is the latest state-of-the-art
advancement from BEHRINGER, one of the world’s
leading manufacturers of feedback suppressors.
Fromconference rooms to concert halls, any venue with
a sound reinforcement system will benet from TN6232’s
unprecedented performance and value.
In designing the TN6232, our engineers have delivered
fully automatic feedback suppressor that requires no
advance setup or tuning. Functioning in real time,
andwith detection accuracy to within one-sixth of a cycle,
the TN6232 is an elegant, “plug and playsolution to one
of live sound’s most vexing problems. Say goodbye to
feedback forever with the EUROCOM TN6232.
• Dual-channel feedback suppression
processor designed for fully automatic and
zero-conguration setup
• Oers up to 10 dB increase in system gain
• Instantly detects and stops acoustic feedback. Highly
eective with both speech and music
• Ultra-fast and highly accurate DSP selects and applies
up to 32 lters per channel
• Two fully independent audio channels to process
stereo or separate zone signals
• Extremely narrow lters (up to 1/30th octave)
to retain overall signal integrity
• Two balanced/unbalanced inputs on combination line
level XLR/TRS and 3-pin Euroblock connectors
• Hinged front door panel covers the control surface
featuring suppression and lter reset buttons plus the
power switch
• Rack ear screw covers, IEC-type AC power cord and all
mating Euroblock connectors included
• Ultra-light, ultra-low noise and ultra-ecient
switch-mode power supply for noise-free
audio, superior transient response and low
powerconsumption
• High-quality components and exceptionally rugged
construction ensure long life
2
Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor
TN6232
Audio Inputs
• Connections 2xXLR/TRScombo
2x3-pinEuroblock
• Inputimpedance appr.10kΩ
• Normalinputlevel +4dBu
• Max.inputlevel +22dBu
Audio Outputs
• Connections 2xXLR
2x3-pinEuroblock
• Outputimpedance appr.120Ω
• Normaloutputlevel +4dBu
• Max.outputlevel +22dBu
System Information
• Controls Poweron/o
Suppression(momentary)
Filterreset(momentary)
IndicatorsBehringerlogo
(Poweron)
Active
Bypass
Reset
• Frequencyresponse 20Hz–20kHz,±0.5dB
• Dynamicrange 102dBA-weighted,
>100dBaudiolter
• THD+N <0.1%@20Hz–20kHz
• Crosstalk <-100dB,-120dBtypical
• S/NRatio ≥100dB
• CMRR >45dB
• Processersystemgain 0dB
• Additionalacousticgain 10dB
Digital Signal Processing (DSP)
• Converters 24-bit
• Samplerate 48kHz
• FeedbackSuppressor(FBQ)
• Feedbackreductionmethod Automaticallydetectandapply
notchlter
• Filters 32independentdigital
notchltersperchannel
• Filterwidth min.1/126thoctave,
max.1/38thoctave
• Resolution 0.2Hz
• Timetondone 100–400msecfeedbackmode
• Timetondmultiple 2–4secfeedbackmodes
• Type Auto-switchingpowersupply
• Mainsvoltage(allregions) 100–240VAC,50/60Hz
• Fuse T1.25AH250V
• Powerconsumption appr.10W
• Mainsconnector StandardIECreceptacle
Dimensions/Weight
• Dimensions(HxWxD) appr.1.7x19x7.6"
appr.44x482x192mm(1U)
• Weight appr.4.6lbs/2.1kg
Technical Specications
3
Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor
TN6232
The automatic feedback suppressor shall be a dual-channel digital signal processor with thirty-two (32) 1/30th octave lters
per channel. The lters shall be of the processor-controlled variable Q type (lter skirts narrow and widen at the discretion of
the processor).
The device may be used on selected insert points, sub-groups, monitor feeds, or the entire mix. It shall detect feedback,
determine the oending frequency, and then assign a notch lter to eliminate the feedback automatically. The device
shall continue to provide this function throughout the program or performance, andshall use dynamic notch lters,
whichwill be automatically assigned to new frequencies should feedback occur during the program. The unit shall include:
anActive/Bypass button with an LED indicator for each mode of operation, allowing the user to set the unit to control
feedback (activemode) or remove the device from the signal path (bypass mode); and a Filter Reset button with LED
indicator, so all lters may be re-congured.
The product shall be equipped with a rear-mounted power switch, an power socket congured to operate at 115 VAC,
balanced and unbalanced inputs on 3-pin Euroblock and combination ¼" TRS / XLR-3 connectors, with balanced and
unbalanced outputs on both 3-pin Euroblock and XLR connectors. The automatic feedback controller shall be the EUROCOM
TN6232 Feedback Suppressor.
(Specications Subject to Change Without Notice)
Architects and Engineers Specications
TN6232
Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor
Copyright © 2013 MUSIC Group IP Ltd. All rights reserved. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, and TURBOSOUND are part of the MUSIC Group (music-group.com). The information contained herein is correct at the time of
printing. Technical specifications and appearance are subject to change without notice. Colors and specifications may vary from actual product. MUSIC Group IP Ltd. accepts no liability for any damages or loss which may be suffered
by any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks are the property of their respective owners. Products are sold through authorized Fulfillers and
Resellers only. Fulfillers and Resellers are not agents of MUSIC Group IP Ltd. or any of its affiliates and subsidiaries, and have absolutely no authority to bind MUSIC Group IP Ltd. by any express or implied undertaking or representation.
MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.
Dimensional Drawings:
TOP
REAR
FRONT
482.6 mm
188.03 mm
44.4 mm
SIDE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Behringer TN6232 Specification

Category
Musical Equipment
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI