Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor

TN6232

Features Product Overview

The TN6232 professional dual-channel feedback

suppression processor is the latest state-of-the-art

advancement from BEHRINGER, one of the world’s

leading manufacturers of feedback suppressors.

Fromconference rooms to concert halls, any venue with

a sound reinforcement system will benet from TN6232’s

of live sound’s most vexing problems. Say goodbye to

feedback forever with the EUROCOM TN6232.

• Dual-channel feedback suppression

processor designed for fully automatic and

zero-conguration setup

• Oers up to 10 dB increase in system gain

• Instantly detects and stops acoustic feedback. Highly

eective with both speech and music

• Ultra-fast and highly accurate DSP selects and applies

up to 32 lters per channel

• Two fully independent audio channels to process

stereo or separate zone signals

• Extremely narrow lters (up to 1/30th octave)

• Rack ear screw covers, IEC-type AC power cord and all

mating Euroblock connectors included

• Ultra-light, ultra-low noise and ultra-ecient

switch-mode power supply for noise-free

audio, superior transient response and low

powerconsumption

• High-quality components and exceptionally rugged

construction ensure long life

2

Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor

TN6232

Audio Outputs

• Connections 2xXLR

  2x3-pinEuroblock

• Outputimpedance appr.120Ω

• Normaloutputlevel +4dBu

• Max.outputlevel +22dBu

System Information

• Controls Poweron/o

Suppression(momentary)

  Filterreset(momentary)

• Dynamicrange 102dBA-weighted,

>100dBaudiolter

• THD+N <0.1%@20Hz–20kHz

• Crosstalk <-100dB,-120dBtypical

• S/NRatio ≥100dB

• CMRR >45dB

• Processersystemgain 0dB

• Additionalacousticgain 10dB

Digital Signal Processing (DSP)

• Samplerate 48kHz

• Resolution 0.2Hz

• Timetondone 100–400msecfeedbackmode

• Timetondmultiple 2–4secfeedbackmodes

• Type Auto-switchingpowersupply

• Mainsvoltage(allregions) 100–240VAC,50/60Hz

• Fuse T1.25AH250V

• Powerconsumption appr.10W

• Mainsconnector StandardIECreceptacle

Dimensions/Weight

• Dimensions(HxWxD) appr.1.7x19x7.6"

3

Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor

TN6232

The device may be used on selected insert points, sub-groups, monitor feeds, or the entire mix. It shall detect feedback,

determine the oending frequency, and then assign a notch lter to eliminate the feedback automatically. The device

shall continue to provide this function throughout the program or performance, andshall use dynamic notch lters,

whichwill be automatically assigned to new frequencies should feedback occur during the program. The unit shall include:

anActive/Bypass button with an LED indicator for each mode of operation, allowing the user to set the unit to control

feedback (activemode) or remove the device from the signal path (bypass mode); and a Filter Reset button with LED

indicator, so all lters may be re-congured.

The product shall be equipped with a rear-mounted power switch, an power socket congured to operate at 115 VAC,

balanced and unbalanced inputs on 3-pin Euroblock and combination ¼" TRS / XLR-3 connectors, with balanced and

unbalanced outputs on both 3-pin Euroblock and XLR connectors. The automatic feedback controller shall be the EUROCOM

TN6232

Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor

Resellers only. Fulfillers and Resellers are not agents of MUSIC Group IP Ltd. or any of its affiliates and subsidiaries, and have absolutely no authority to bind MUSIC Group IP Ltd. by any express or implied undertaking or representation.

MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.

Dimensional Drawings: