How to install
1. SETUP Buttons
This Button selects function of BRIGHTNESS, COLOR, TINT, CONTRAST
and SHARPNESS.
When Pressing this button (#1), it displays OSD Menu and actual setting.
2. SETTING / VOLUME Buttons
Set the proper value of BRIGHTNESS, COLOR, TINT, CONTRAST and
SHARPNESS by using #2 buttons after selecting menu with #1 buttons.
These buttons are also used to set the audio volume when these buttons
are not used for setup menu.
3. VIDEO SEL Button
Pressing this button, it displays input channel such as VIDEO1/VIDEO2/S-
VHS.
Pressing this button, the menu OSD disappears.
4. POWER Button
Turn On or Off the power.
Volume
SETTINGSETUP
VIDEO
SET
Exit
AC IN
Connect the supplied power cord to this AC IN and the other end to an
electrical outlet.
VIDEO INPUTS/OUTPUTS
CH 1,2 : Composite video Inputs/outputs (BNC).
S-VHS : Input/output for S-VHS
AUDIO INPUTS/OUTPUTS
Connect the audio to CH1, CH2, or CH3 corresponding to connection for
video input.
AC INPUT
CH1 CH2 S-VHS
CH1 CH2 S-VHS
VIDEO
IN
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
/
