Panasonic DMPBDT700EG Owner's manual

Brand: Panasonic

Model: DMPBDT700EG

Category: Blu-Ray players

Type: Owner's manual

This manual is also suitable for

DMP-BDT700EG

Operating Instructions

Blu-ray Disc

Player

Model No. DMP-BDT700

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure

that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you

are notified.

For details, refer to “Firmware updates” (> 15) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

SQT0268

until

2014/7/7



DMP-BDT700EG-SQT0268.book 1 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 2 -

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this

unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the

socket outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile telephone.

≥ This unit is intended for use in moderate climates.

≥ Some portions of this unit may become hot during use. When

moving or cleaning this unit, disconnect the AC mains lead and

wait for 3 minutes or longer.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that

may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same

time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for

a long period of time. Store in a cool, dark place.

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of

unauthorized copies of some commercially-produced film and

videos and their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will be displayed and

playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at

http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

Precautions

WARNING

Small object

Keep the Memory Card and the batteries out of reach of children

to prevent swallowing.

CAUTION

Restriction on use of

unauthorized copied content

DMP-BDT700EG-SQT0268.book 2 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 3 -

≥ The operation history may be recorded in the memory of this

unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries must not be

mixed with general household waste.

For proper treatment, recovery and recycling of old

products and used batteries, please take them to

applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination with a

chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical

involved.

Wireless LAN connection

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any

condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and

follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorized Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is intended to be used in the following countries.

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Finland, France, Germany, Greece, Hungary, Ireland, Italy,

Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, United Kingdom, Switzerland

This product is intended for general consumer. (Category 3)

The WLAN feature of this product shall exclusively be used

inside buildings.

This product on purpose to connect to access point of 2.4 GHz or

5GHz WLAN.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the

procedure to return all the settings to the factory presets to delete

the user settings. (> 34, “To return all settings to the factory

preset.”)

DMP-BDT700EG-SQT0268.book 3 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 4 -

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Getting started

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 5

Playable media. . . . . . . . . . . . . . . 6

Control reference guide . . . . . . . . 8

Connections and settings

Connecting to a TV . . . . . . . . . . 10

Connecting to

an amplifier/receiver . . . . . . . . . 11

Connecting to the network . . . . . 13

Settings . . . . . . . . . . . . . . . . . . . 14

Playback

Inserting or removing media . . . . 16

HOME menu . . . . . . . . . . . . . . . . 16

Playback . . . . . . . . . . . . . . . . . . . 17

Enjoying

Network Service . . . . . . 20

Home Network feature . . . . . . . . 21

VIERA Link

“HDAVI Control™”. . . . . . . . . . . 23

Settings

Option menu . . . . . . . . . . . . . . . . 24

Setup menu. . . . . . . . . . . . . . . . . 28

Reference

Troubleshooting guide . . . . . . . . 34

Specifications . . . . . . . . . . . . . . . 39

DMP-BDT700EG-SQT0268.book 4 ページ２０１４年５月１５日　木曜日　午後４時１９分

Getting started

- 5 -

Getting startedGetting started

Accessories

Check the supplied accessories before using this

unit.



≥ Product numbers are provided in these operating

instructions correct as of May 2014. These may be subject

to change.

≥ Do not use AC mains lead with other equipment.

∫ Using the remote control

Insert the batteries to the terminal so that it (i

and j) matches those in the remote control.

Unit and media care

∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

∫ Clean discs

Wipe with a damp cloth and then wipe dry with a

dry cloth.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Clean any dust, water, or foreign matter from

the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

1 Remote control

(N2QAYA000085)

2 Batteries for remote control

1 AC mains lead

1HDMI Cable

1CD-ROM

Point it at the remote control signal sensor on this

unit. (> 9)





R03/LR03, AAA

(Alkaline or manganese batteries)

Lens cleaner: RP-CL720AE

≥ This lens cleaner may not be available for

sale in all countries, e.g. not available in

Germany, please consult your Panasonic

dealer for advice.

≥ This lens cleaner is sold as specific for DIGA,

but can be used on this unit as well.

DO NOT

DMP-BDT700EG-SQT0268.book 5 ページ２０１４年５月１５日　木曜日　午後４時１９分

Getting started

- 6 -

Playable media

Device Media markings Device types Contents format

BD-Video Video

BD-RE

Video,

JPEG, MPO

BD-R Video, MKV, Xvid

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

Xvid,

JPEG, MPO,

AAC, FLAC, MP3,

WAV, WMA

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV, Xvid,

JPEG, MPO,

AAC, FLAC, MP3,

Music [CD-DA], WAV,

WMA

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro

types)

AVCHD, AVCHD 3D,

MP4,

JPEG, MPO

—

USB devices

(up to 2 TB)

MKV, MP4, MPEG2,

Xvid,

JPEG, MPO,

AAC, FLAC, MP3,

WAV, WMA

≥ See pages 7 and 39 for more information on the types of content that can be played.

DVD

USB

DMP-BDT700EG-SQT0268.book 6 ページ２０１４年５月１５日　木曜日　午後４時１９分

Getting started

- 7 -

∫ Types of discs that cannot be played

by this unit

Any other disc that is not specifically

supported or previously described.

∫ Region management information

∫ Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to

be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

∫ BD-Video

≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio

and DTS-HD Master

Audio

) adopted in BD-Video.

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI

Cable.

≥ 2D video can be enjoyed as 3D virtually. (> 26)

∫ Music CD

Operation and sound quality of CDs that do not

comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

∫ SD card

≥ miniSD Cards, microSD Cards,

microSDHC Cards and

microSDXC Cards can be used,

but must be used with an adaptor

card. These are usually supplied

with such cards, or otherwise

customer provided.

≥ To protect the card’s contents,

move the record prevention tab (on the SD

card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards

that meet SD Card Specifications FAT12 and

FAT16 formats, as well as SDHC Memory

Cards in FAT32 format and SDXC Memory

Cards in exFAT.

≥ If the SD card is used with incompatible

computers or devices, recorded contents may

be erased due to the card being formatted etc.

≥ Usable memory may be slightly less than the

card capacity.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized, the

power to the HDD may not be supplied. Supply

power from an external source.

∫ BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the

audio etc., correctly.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method

and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

BD-Video

DVD-Video

Example:

DMP-BDT700EG-SQT0268.book 7 ページ２０１４年５月１５日　木曜日　午後４時１９分

Getting started

- 8 -

Control reference guide

When other Panasonic devices respond to the

remote control of the unit, change the remote

control code. (> 33)

㄂

1 Turn the unit on and off

2 Open or close the disc tray (> 16)

3 Select title numbers, etc./Enter numbers or

characters

4 Show Miracast

screen (> 21)

5 Start up the DLNA function (> 21)

6 Show Pop-up menu (> 17)

7[3, 4, 2, 1] : Move the highlight for

selection

[OK] : Confirm the selection

(2;)(;1) : Frame-by-frame (> 17)

8 Show Option menu (> 24)

9 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display

10 Basic playback control buttons (> 17)

11 Show “Playback Information Window” (> 18)

12 Show the status messages (> 18)

13 Show “Picture Settings” (> 25)

14 Switch the “Sound Effects” setting (> 26)

15 Light up the remote control buttons

16 Transmit the remote control signal

17 TV operation buttons

You can operate the Panasonic TV using this

unit’s remote control. Some buttons may not

work depending on the TV.

[Í TV] : Turn the TV on and off

[AV] : Change input

[WXCH] : Channel select

[ijVOL] : Adjust the volume

18 Show “Player Settings” (> 28)

19 Show HOME menu (> 16)

20 Show the Home screen of the Network

Service (> 20)

21 Show Top menu (> 17)

22 Return to previous screen

23 Show “Subtitles”/“Subtitle Settings” (> 24)

24 Change soundtrack (> 17)

25 Show “3D Settings” (> 26)

26 Switch the “High Clarity Sound” settings

(> 26)

27 Switch the brightness of the unit’s display

(> 33)

DMP-BDT700EG-SQT0268.book 8 ページ２０１４年５月１５日　木曜日　午後４時１９分

Getting started

- 9 -

1 Disc tray (> 16)

2 Display

3 USB port (> 16)

4 SD card slot (> 16)

5 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and

right

6 V.OFF LED (Video off LED)

It is possible to set the LED to turn on/off.

(> 33)

7 Open or close the disc tray* (> 16)

8 Basic playback control switches* (> 17)

9 Standby/on switch* (Í/I) (> 14)

Touch to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

* These buttons work just by touching the marks.

When these buttons are touched, the LED will light up.

Rear panel terminals (> 10–13)

789

2 3 4 5 6

Pull to flip down

the front panel.

DMP-BDT700EG-SQT0268.book 9 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 10 -

Connections and settings

Connecting to a TV

Connect the AC mains lead after making all connections.

≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC

power.

≥ Use HDMI AV OUT MAIN terminal with the supplied HDMI cable.

≥ Insert the AC mains lead up to A, a point just before the round hole.

≥ To enjoy 4K output, you need to connect this unit to a 4K compatible TV.

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.

When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.

It is recommended that you use Panasonic’s HDMI cable.

A High Speed HDMI-compliant cable that supports 18 Gbps is supplied with this unit.

Part number : K1HY19YY0032

≥ To enjoy image in 4K (50p/60p), set “4K ( 50p/60p ) Output” to “Automatic”. (> 28)

≥ In case problems occur for the playback of content such as no picture or picture distortion, check the

HDMI cable, related connections and the compatibility of TV video input.

To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device.

≥ This unit consumes a small amount of AC power (> 39) even when turned off in standby mode. For

the purpose of energy conservation, the unit should be disconnected if you will not be using it for

extended period of time.

HDMI IN



HDMI cable (supplied)

AC mains lead

(supplied)

To a household mains

socket

DMP-BDT700EG-SQT0268.book 10 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 11 -

Connections and settings

Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input

terminal.

≥ Use HDMI AV OUT MAIN terminal with the supplied HDMI cable.

≥ Set “Digital Audio Output” (> 29).

≥ To enjoy images in 4K (50p/60p), you need to connect a 4K (50p or 60p) compatible amplifier and a

TV with an HDMI cable that supports 18 Gbps.

≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then

connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to

5.1ch.

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected

using an optical digital cable or coaxial cable in order to enjoy the TV’s sound through the amplifier/

receiver.

HDMI AV OUT

HDMI IN

(ARC)

HDMI OUT

(ARC)

HDMI IN

Amplifier/receiver

HDMI cable

HDMI cable (supplied)

HDMI AV OUT SUB

You can enjoy richer sound by using the HDMI AV OUT SUB terminal.

≥ Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (> 28)

– Audio is output in high resolution.

≥ It is possible to play back 3D videos, 3D still pictures and 4K videos, etc., when the connected TV is

3D or 4K compatible, even if the amplifier/receiver is not 3D or 4K compatible.

≥ The HDMI AV OUT SUB terminal is not compatible with the VIERA Link “HDAVI Control” (> 23).

HDMI IN HDMI IN

HDMI cableHDMI cable (supplied)

Amplifier/receiver

DMP-BDT700EG-SQT0268.book 11 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 12 -

Connections and settings

≥ Set “HDMI Audio Output” to “Off” (> 29).

≥ Set “Digital Audio Output” (> 29).

≥ Connect terminals of the same colour.

Cable connections

A Front speaker (L/R)

B Surround speaker (L/R)

C Centre speaker

D Subwoofer

E Surround back speaker (L/R) (Only for 7.1ch AUDIO OUT)

≥ Set “Analogue Multi Channel” to “On”, and set the speaker presence and size according to your

environment (> 30). (Audio is not output from HDMI AV OUT terminal.)

DIGITAL AUDIO OUT (OPTICAL or COAXIAL)

OPTICAL IN

COAXIAL IN

Optical digital cable

Coaxial cable

Amplifier/receiver

2ch AUDIO OUT

AUDIO IN

Audio cable

Amplifier/receiver

7.1ch AUDIO OUT

Connect Audio

cables to terminals

corresponding to

the speakers you

have connected.

DMP-BDT700EG-SQT0268.book 12 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 13 -

Connections and settings

Connecting to the network

The following services can be used when this unit is connected to broadband.

For details about connection method, refer to the instructions supplied with the connected equipment.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ See page 3 for the precautions of wireless LAN connection.

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

≥ Firmware can be updated (> 15)

≥ You can enjoy BD-Live (> 18)

≥ You can enjoy Network Service (> 20)

≥ You can access other devices (Home Network) (> 21)

≥ This unit supports Wi-Fi Direct

and can make a wireless connection to wireless devices without

router. You can use this function when enjoying Home Network feature, etc. Internet access is not

available while connected via Wi-Fi Direct

. (> 21, 31)

Wireless LAN connection

This unit has built-in Wi-Fi

and can be connected to a wireless router.

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.

Wireless router, etc.

Internet

LAN cable connection

Broadband router, etc.

Internet

LAN Cable

DMP-BDT700EG-SQT0268.book 13 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 14 -

Connections and settings

After connecting your new player for the first time

and pressing [Í], the basic settings screen will

appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

≥ If your wireless network is encrypted,

Encryption Key input screen will be displayed.

Input the encryption key of your network.

Settings

The following settings can be performed anytime

in the Setup menu. (> 31, 32)

Easy Settings

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to apply your

connection settings.

∫ “Wireless” connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*

≥ If your wireless connection is encrypted,

please be sure that you know your

encryption key.

Select “Search for wireless network” or “WPS

(PUSH button)”, then follow the on-screen

instructions and apply the settings.

Easy Network Setting

Wired

Wireless

Select a connection mode.

RETURN

WPS (PUSH button):

If your wireless router supports

WPS (PUSH button), you can

easily perform the settings by

pressing WPS button on it.

WPS (Wi-Fi Protected Setup

) is a standard that

facilitates settings relating to the connection and

security of wireless LAN devices.

1 Press WPS button or corresponding button of

the wireless router until the lamp starts

flashing.

≥ For details, refer to the operating instruction

of the wireless router.

2 Select “Start”.

Search for wireless network:

≥ When you select “Search for wireless network”,

the available wireless networks will be

displayed. Select your network name.

– If your network name is not displayed, search

again by pressing the red button on the

remote control.

– Stealth SSID will not be displayed when you

select “Search for wireless network”. Enter

manually by using “Manual setting”.

(Press [PLAYER SETTING] > select

“Network” > select “Network Settings” >

select “Wireless Settings” > select

“Connection Setting” > select “Manual

setting”)

Wireless Settings

Select a connection method to wireless access point.

Please refer to the operating instructions of your wireless

access point about connection methods.

Search for wireless network

WPS (PUSH button)

e.g.

DMP-BDT700EG-SQT0268.book 14 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 15 -

Connections and settings



≥ Refer to the operating instructions of the hub or router.

≥ Do not use this unit to connect to any wireless network for

which you do not have usage rights.

Using these networks may be regarded as illegal

access.

≥ If you have trouble getting online on your PC after

performing network settings on this unit, perform the

network settings on your PC.

≥ Please be aware that connecting to a network without

encryption may result in the leaking of data such as

personal or secret information.

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

The wireless router compatible with Wi-Fi Protected

Setup

may have the mark.

Occasionally, Panasonic may release updated

firmware for this unit that may add or improve the

way a feature operates. These updates are

available free of charge.

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.*

When a new firmware version is available, the

following message is displayed.

DO NOT DISCONNECT the unit from the AC

power or perform any operation while the update

takes place.

After the firmware is installed, “Finish” will be

displayed on the unit’s display. Unit will restart

and the following screen will be displayed.



≥ If downloading on this unit fails or this unit is not

connected to the Internet, then you can download the

latest firmware from the following website and burn it

to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. (> 33,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

≥ If you do not want to check for the latest firmware version,

set “Automatic Update Check” to “Off”. (> 33)

* You must agree to the terms of use for the Internet function

and the privacy policy. (> 31, “Notice”)

Firmware updates

Firmware Update

Current Installed Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.net/support/

RETURN

Yes

The firmware has been updated.

Current Version

x.xx

DMP-BDT700EG-SQT0268.book 15 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 16 -

Playback

Inserting or removing

media

Notes

≥ When inserting a media item, ensure that it is

facing the correct way, which is the right side

facing up.

≥ When removing the SD card, press the centre

of the card and pull it straight out.

≥ If you connect a Panasonic product with a USB

connection cable, the setup screen may be

displayed on the connected equipment. For

details, refer to the instructions for the

connected equipment.

CAUTION

Do not place objects in front of the unit. The disc

tray may collide with objects when it is opened,

and this may cause malfunction.

HOME menu

Major functions of this unit can be operated from

the HOME menu.

Preparation

Turn on the TV and select the appropriate video

input.

1 Press [Í] to turn on the unit.

2 Press [OK] or [2, 1] to select the item.

≥ Press [OK] or [3, 4] to select the item if

necessary

To show the HOME menu

Press [HOME].



≥ Items to be displayed may vary with the media.

Videos/Music/Photos

Disc

Play back the contents.

(> 17)

≥ When multiple contents are

recorded, select the types

of contents or the title.

SD Card

USB

Home Network

DLNA Client

(> 21)

Miracast

(> 21)

Media

Renderer

(> 22)

Network Service

Displays the Home screen of Network Service.

(> 20)

Setup

Player Settings

(> 28)

Wallpaper

Changes the background of

HOME menu.

SD Card

Management

(> 18)

DMP-BDT700EG-SQT0268.book 16 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 17 -

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].

Repeat this step if necessary.



≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫] when you have finished playback

to protect the unit’s motor, your TV screen and so on.

≥ When the following conditions are met, a still picture will be

played back in 4K. The resolution of the still picture will be

changed automatically.

– The unit is connected to a 4K compatible TV

– “HDMI Video Format” is set to “Automatic” (> 28)

– The still picture is being played back in 2D

≥ MKV: Successive play is not possible.

≥ It is not possible to play back AVCHD and MPEG2 videos

which have been dragged and dropped or copied and

pasted to the media.

The following functions may not work depending

on the media and contents.

Press [∫].

The stopping point is memorized.

Resume play function

Press [1] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the

resume play function does not work.

Press [;].

≥ Press [;] again or [1] to restart play.

While playing, press [6] or [5].

≥ Xvid, MKV, MP4 and MPEG2: Audio is not

heard.

Slow motion

While paused, press [6] or [5].

≥ BD-Video and AVCHD: [5] only.

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single

step.

≥ Press [1] to revert to normal playback speed.

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

Skip forward 1 minute

Press [+60s].

Skip backward 10 seconds

Press [-10s].

≥ Xvid and MKV: Not effective.

While paused, press [2] (2;) or [1] (;1).

≥ Press and hold to fast forward.

≥ Press [1] to revert to normal playback speed.

≥ BD-Video and AVCHD: Forward only.

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

Press [AUDIO].

You can change the audio channel number or

soundtrack language, etc.

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

Operations during playback

Stop

Pause

Search/Slow motion

Skip

Manual Skip

Frame-by-frame

Changing soundtrack

Show top menu/pop-up menu

DMP-BDT700EG-SQT0268.book 17 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 18 -

Playback

While playing, press [PLAYBACK INFO.].

You can check the detailed disc playback status.

Press [RETURN] to exit.

While playing, press [STATUS].

The status messages give you information about

what is currently being played. Each time you

press [STATUS], the display information may

change or disappear from the screen.

≥ Depending on media and contents, the display

may change or not appear.

e.g., BD-Video

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Tota l t im e

e.g., JPEG

≥ During music playback, the elapsed time, file

name and other relevant information are

displayed on the unit’s display.

e.g.,MP3

Preparation

Connect this unit to a 3D compatible TV. (> 10)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed

on the screen.

≥ 3D Settings (> 26, 30)



≥ Please refrain from viewing 3D images if you do not feel

well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or

other discomfort while viewing 3D images, discontinue use

and rest your eyes.

≥ 3D video might not output the way it is set in “HDMI Video

Format” and “24p Output” (> 28).

≥ When playing back 3D photos from “Photos” screen, select

from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the

red button on the remote control to switch the view of

playback contents.

With “BD-Live” discs, you can enjoy bonus

contents that use Internet access.

For this BD-Live function, insertion of an SD card

is necessary along with Internet connection.

1 Perform network connection and settings.

(> 13, 14)

2 Insert an SD card with 1 GB or more free

space.

≥ The SD card is used as the local storage.

3 Insert the disc.

∫ Deleting data/Formatting SD cards

Select “SD Card Management” in the HOME

menu (> 16), then select “BD-Video Data

Erase” or “Format SD Card”.



≥ The usable functions and the operating method may vary

with each disc, please refer to the instructions on the disc

and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for

certain discs (> 32).

Show the status messages

Audio/video attribute information of

disc.

Settings status of “Digital Audio

Output” (> 29).

HDMI output information.

Play

BD-Video

Date 11.12.2010

Size 500 x 375

Manufacturer

Equipment

No.

Enjoying 3D video and photos

Enjoying BD-Live

DMP-BDT700EG-SQT0268.book 18 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 19 -

Playback

Play a slideshow of photos and adjust various

settings during the playback.

1 Insert the media.

2 Select “Photos”.

3 Select an item and press the green button.

The following items can be set.



≥ Still pictures displayed as “ ” cannot be displayed as

thumbnail with this unit.

≥ When both the music CD and the USB device with

recorded music are inserted into this unit, the music CD

has priority to be played back as background music.

≥ You cannot play back AAC as background music.

Slideshow

Start

Slideshow

Start the slideshow.

You can display still pictures in

the selected folder one by one

at a constant interval.

Interval Change the display interval.

Transition

Effect

Select the effect when sliding

pictures.

Repeat Play

Set whether to repeat the

slideshow.

Soundtrack

Set whether to play

background music.

≥ FLAC and MP3, etc., on the

USB device can be played

back during the slideshow of

JPEG on the USB device or

the SD card.

≥ A music CD can also be

played back during the

slideshow of JPEG on the

SD card.

Soundtrack

Folder

Select the folder from which

the music files are played.

Random

Soundtrack

Background music is played in

random order.

DMP-BDT700EG-SQT0268.book 19 ページ２０１４年５月１５日　木曜日　午後４時１９分

- 20 -

Playback

Enjoying

Network Service

Network Service allows you to access some

specific websites supported by Panasonic.

* Images are for illustration purposes, contents may change

without notice.

Preparation

≥ Network connection (> 13)

≥ Network setting (> 14)

1 Press [INTERNET].

2 Select the item and press [OK].

To exit from Network Service

Press [HOME].



≥ When playing content in the media, Network Service

cannot be accessed by pressing [INTERNET].

≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of Network Service

(> 32, “Network Service Lock”)

– When the audio is distorted

(> 31, “Audio Auto Gain Control”)

– When wrong time is displayed

(> 31, “Time Zone”, “Summer Time”)

≥ When using a slow Internet connection, the video may not

be displayed correctly. A high speed Internet service with a

speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware as soon as a firmware

update notice is displayed on the screen. If the firmware is

not updated, you may not be able to use Network Service

function properly. (> 15)

≥ Network Service Home Screen is subject to change

without notice.

≥ The services through Network Service are operated by

their respective service providers, and service may be

discontinued either temporarily or permanently without

notice. Therefore, Panasonic will make no warranty for the

content or the continuity of the services.

≥ Some features of websites or content of the service may

not be available.

≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries

and may be presented in specific languages.

BACK

Network Service provides a variety of

selected Internet services such as the

following.

≥ Online movie rental service

≥ Video browsing service

Internet

DMP-BDT700EG-SQT0268.book 20 ページ２０１４年５月１５日　木曜日　午後４時１９分

Page is loading ...

Panasonic DMPBDT700EG Owner's manual

Brand: Panasonic

Model: DMPBDT700EG

Category: Blu-Ray players

Type: Owner's manual

This manual is also suitable for

DMP-BDT700EG

Download PDF

report

Panasonic DMPBDT700EG Owner's manual

This manual is also suitable for

Panasonic DMPBDT700EG Owner's manual

Related papers

Other documents