Points for Attention
1. Do not use the player in exceptionally cold or hot, dusty, damp or dry environments.
2. Do not allow the player to fall down while using it.
3. Please charge your battery when
A. Battery power icon shows an empty icon;
B. The system automatically shuts down and the power is soon off when you switch on the unit
once again;
C. There is no response if you operate on any key
4. Please do not disconnect power abruptly when the player is being formatted or in the process of
uploading or downloading. Otherwise it may lead to the error in the program.
5. When this unit is used as a moving disk, the user shall store or export files in the proper file
management operation method. Any improper operation method may lead to the loss of files, for
which this Company will be held no liable.
6. Please do not dismantle this unit by yourself. If there is any inquiry, please contact the dealer.
7. While connecting wifi, if not use the tablet for a long time, wifi will be disconnect, after the tablet is
wake up, wifi will connect automatically.
8. There will be no separate notice in the case of any change in the functions and performance of
this product.
Basic Operation
Power on
In the shutdown state, long press " " button boots
Power off
In the power on state, long press the " " key 3 seconds then pop-up device options, select " Power
off " for shut down.
Sleep
the machine under normal operating conditions, Short press the power button, Into hibernation,
Now, Screen will close. Short press the power button again, Be able to resume normal mode. When the
time being use this MID can enable this feature when, To reduce power consumption.
Power reset
If there is shutdown to the player in the process of operation, you can turn off and restart the player
by pressing "reset" key.
Screen time out
If you do not contact the player within the set time, and do no operate by the button, the contact
screen will be automatically turns off.
In any state, short press " " button and for activation; Then skid the lock upwards to the green of
spotted which will accomplish to access to the upper interface.
If it is necessary to deactivate the contact screen time out function, you can set the [Screen time
out] option under [display] function into "Never ".
Using the Micro SD card
After this unit is connected with the computer, you will find two moving disks. The first one is the
built-in memory disk for this unit and the other is the disk for the Micro SD card. If no card is inserted, the
second disk can not be opened. This unit supports the extension of the Micro SD card from4GB to
32GB.
Inserting and Pulling out the Micro SD card
Inserting:
Put the Micro SD card face up (side with words), and slightly force the card into the socket of the
card, i.e. connecting the unit. Under this state, you can play the content in the Micro SD card.
Pulling:
Slightly push the Micro SD, and it will bounce by a section, and then you can take it out.
Caution:
Please perform inserting and pulling operation when power is off! Otherwise, it will lead to the loss
or damage to the files within the unit! If no card is inserted, the computer will be unable to perform read