NRS Linton Plus Series User Instructions

Brand: NRS

Model: Linton Plus Series

Type: User Instructions

NRS Linton Plus Series is a line of raised toilet seats designed to provide comfort and support for users. The seats feature a contoured form with a rear cutaway for the coccyx and a front cutaway for easier personal cleaning. They are simple to install and maintain, and fit to a standard toilet with plastic fixing brackets provided. The seats are made from recyclable polypropylene and the support brackets are made from nylon. They have a maximum user weight limit of 30st (190kg). The seats may be autoclaved on cleaning cycles up to 73°C.

User Instructions

Linton Plus Raised Toilet Seat Range

Maximum User Weight:

30st

190kg

Intended Use

The Linton Plus Raised Toilet Seat has a

contoured form that offers comfort as well as

support with a rear cutaway for the coccyx,

and a front cutaway allows easier personal

cleaning. It is simple to install and maintain. It

has a buffer fitted to the front skirt to reduce

“tipping” of the seat. The seat fits to a

standard toilet with plastic fixing brackets

provided.

Specifications:

Seat: Recyclable Polypropylene

Support Brackets: Nylon

Unpacking

Check all parts carefully before assembling

the product.

Do not assemble if any of the parts are

damaged.

Do not assemble if any of the parts in the

Contents list are missing.

General Safety Warning

Please ensure these instructions are fully

read and understood before installation/ use.

Retain these instructions in a safe place for

future reference.

Fitting Instructions

1 - Engage the support brackets into the slots on

the seat (See Diagram 1)

2 - Turn the hand wheel clockwise until the

threads engage. Do not tighten any further at

this stage.

Fitting to the Toilet bowl:

Note: Ensure the toilet to which the seat is being

fitted is safe and secure.

3 - Lift the existing toilet seat up.

M53163/M53564 - 50mm (2")

M53175/M53576 - 100mm (4")

Page 1

Seat

Hand

Wheel

Support

Bracket

CONTENTS LIST

Item

Description Qty.

1 Linton Plus Raised Toilet Seat 1

2 Hand Wheel 2

3 “L” Shaped Support Bracket 2

Diagram 1

Cleaning Instructions

• Clean regularly, use a general purpose,

neutral detergent and warm water

• Please check the suitability of the product

before use. Do not use abrasive cleaners

as this will permanently damage the

surface and invalidate any warranty.

• Do not use any form of solvent as this will

damage the surface and weaken the

product and again invalidate any warranty.

• To disinfect, wipe with a mild chloride

disinfectant (solution of 1000 parts per

million.

• These seats may be autoclaved on

cleaning cycles up to 73°C

• Dry the seat thoroughly before use.

Disposal Instructions

•

Appropriate hygiene standards should be

applied before disposal to reduce the risk

of infection.

• Materials used are essentially non

hazardous and can be disposed of

appropriately.

Manufactured for

Nottingham Rehab Supplies

Clinitron House,

Excelsior Road,

Ashby Park,

Ashby de la Zouch,

Leicestershire,

LE65 1JG

United Kingdom

Tel: 0845 120 4522

Int’l: +44 (0) 1530 418378

Fax: 0845 121 8112

Email: customerse[email protected]

This product is from a range of over 3000 daily

living aids available from Nottingham Rehab

Supplies. To view the full range visit

www.nrs-uk.co.uk or request a catalogue

from the above number.

www.nrs

uk.co.uk

UI/M53163/M53175/M53564/M53576/11/11/Issue2

Fitting Instructions

–

Continued

4 - Lower the Linton Plus Toilet Seat onto the

toilet bowl, with the narrow cut-out at the front

and the brackets near the back ensuring the

front lip is outside of the bowl, and the seat is

evenly positioned about the bowl.

5 - To ensure the Linton seat is fitted correctly

to the bowl, tighten each support bracket by

turning both hand nuts simultaneously, an

equal amount, until the seat is secure.

Correct Use

• We recommend that you regularly check

your seat, ensuring that the hand wheels

are tight and the seat remains evenly

positioned on the bowl.

• If you suspect that the seat has moved out

of position, please follow the instructions

above to move it back into the correct

position and retighten all fitments.

• Do not under any circumstances stand on

the seat or allow others to do so as this is

highly dangerous and will compromise the

safety of the user.

• If you have to remove the Raised Toilet

Seat for any reason, please ensure that you

follow the installation instructions again fully

before using. Failure to do so could

compromise the safety of the user.

Safety Precautions

• Do not exceed the maximum user weight

limit of 30st (190kg)

• Inspect the Toilet Seat regularly to ensure it

is fitted correctly, is safe and secure, and fit

for use. If in any doubt, contact a

competent installer of sanitary equipment.

• Inspect at regular intervals for wear and

damage.

• Any undue signs of damage should be

noted and reported to the supplier in the

first instance. Should damage be evident,

then the user should refrain from using the

product until advice has been sought from

the supplier.

Page 2

NRS Linton Plus Series User Instructions

Brand: NRS

Model: Linton Plus Series

Type: User Instructions

Download PDF

report

NRS Linton Plus Series User Instructions

NRS Linton Plus Series User Instructions

Related papers

Other documents