Dacor Epicure ESG366, Epicure ESG486, ESG486 User manual

  • Hello! I am an AI chatbot trained to assist you with the Dacor Epicure ESG366 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
4.1
36”, 48” Wide,
Epicure™ Gas Cooktops
ESG366, ESG486
1/2091605
5/8”
(16mm)
25 1/2”
(648mm)
“A”
3 1/2”
(89mm)
Model No. “A” Cooktop Width “B” Cooktop Cutout
Width
“C” Mounting Holes Set
Back
“D” Distance Between
Mounting Holes
“E” Distance from
Countertop
ESG366 36” (914mm) 34 3/4” (883mm)
11 1/4” (286mm)
33 1/4” (845mm) 1 3/8” (35mm)
ESG486 48” (1219mm) 46” (1168mm) 41 5/16” (1049mm) 3 15/16” (100mm)
OVERALL DIMENSIONS
(ESG486 Shown)
“A”
“B”
6”
(152mm)
25” (635mm)
Typical Counter
3” (76mm)
22”
(559mm)
Vertical Non-Combustible
Surface Rear Wall
10”
(254mm)
Min. to Combustible
side wall (both sides)
6”
(152mm)
Utility Cutout
Location
3/4” Support
Platform
1/2” (13mm)
Mounting Holes
“C”
“E”
“D”
CUTOUT DIMENSIONS
Combustible
rear wall
material
26 1/2" (673mm)
27" (686mm)
7 3/4"
(197mm)
Top of
finished
counter
3/4” (19mm) Min.
Cooktop
platform
2 1/2" (64mm)
to combustible surface
1 1/2" (38mm) Min.
Combustible
Rear Wall
Material
Optional Stainless Steel
Dacor Backsplash
(AEB3609 or AEB3612)
3/4” (19mm) Min.
Cooktop
Platform
SIDE VIEW SIDE VIEW WITH BACKSPLASH
PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
4.2
36”, 48” Wide,
Epicure™ Gas Cooktops
ESG366, ESG486
2/2062805
Model
No.
Dedicated
Circuit
Required
Total
Connected
Load
Gas Supply
Requirements
Approximate
Shipping
Weight
ESG366
120VAC,
60Hz, 15A
(Breaker)
0.03kW
(0.25A)
3/4” (19mm)
Regulator -
Natural Gas
Standard
128 lbs.
ESG486 149 lbs.
Model No. “C” Min. Hood Width “C” Recommended Hood Width
ESG366 36” (914mm) 42” (1067mm)
ESG486 48” (1219mm) 54” (1372mm)
Recommended
Utility Location
30" (762mm) Minimum from
finished countertop to combustible/
non-combustible surfaces
"C"
18” (457mm) Min.
Both Sides
7 3/4” (197mm)
UPPER CABINET DIMENSIONS
(Upper Cabinets 13” (330mm) Maximum Depth)
NOTES:
1. Factory installed liquid propane (LP) special
ordered.
2. Cooktop is supplied with a 48” (1219mm) power
cord, with a three prong grounded plug.
3. Utilities are located in the right rear corner of the
cooktop.
4. Utlities may be located in the right rear corner of
the cabinet below the cooktop. (Recommended)
5. See the Combination Installation (CI) Section if
installing with a downdraft, or warming oven.
/