Vello EPN-DK19 User manual

Vello
Brand
Vello
Model
EPN-DK19
Category
Warranty & support extensions
Type
User manual

Vello EPN-DK19 is a rubber eyepiece designed for select Nikon cameras. It enhances comfort, blocks stray light, and prevents scratches to eyeglasses. Installation is simple: remove the standard eyepiece, attach the metal retainer ring, insert the camera's eyepiece into the Vello eyecup, replace the retainer ring, and screw the assembly onto the camera. Enjoy improved viewing comfort and reduced glare while shooting outdoors or in bright conditions.

Vello EPN-DK19 is a rubber eyepiece designed for select Nikon cameras. It enhances comfort, blocks stray light, and prevents scratches to eyeglasses. Installation is simple: remove the standard eyepiece, attach the metal retainer ring, insert the camera's eyepiece into the Vello eyecup, replace the retainer ring, and screw the assembly onto the camera. Enjoy improved viewing comfort and reduced glare while shooting outdoors or in bright conditions.

EPN-DK19
RUBBER EYEPIECE
FOR SELECT NIKON
CAMERAS
USER’S MANUAL
INTRODUCTION
Thank you for choosing Vello.
The Vello EPN-DK19 Rubber Eyepiece for Select
Nikon Cameras improves comfort over the standard
eyepiece and prevents stray light from entering the
viewfinder, making the eyepiece especially useful
while working outdoors in bright sunlight. The
eyecup mounts securely to the camera, and the soft
and durable rubber construction prevents scratches
to eyeglasses.
2
PRECAUTIONS
CONTENTS INCLUDE
• Please read and follow these instructions and keep
this manual in a safe place.
• Keep this product away from children.
• To avoid damage to this product, be careful not
to overtighten or improperly thread the threaded
fitting.
• All photos are for illustrative purposes only.
• EPN-DK19 Rubber Eyepiece
• Metal retainer ring
• User manual
3
INSTRUCTIONS
1. Close your camera’s
eyepiece shutter to
unlock the eyepiece, and
unscrew the eyepiece to
remove.
2. Remove the rubber
ring from around the
camera’s eyepiece.
4
3. Remove the metal
retainer ring from the
Vello eyecup.
4. With the ridges up,
insert the camera’s
eyepiece into the top of
the Vello eyecup. Make
sure the eyepiece is fully
inserted, and not resting
on top of the eyecup.
3. Remove the metal
retainer ring from the
Vello eyecup.
4. With the ridges up,
insert the camera’s
eyepiece into the top of
the Vello eyecup. Make
sure the eyepiece is fully
inserted, and not resting
on top of the eyecup.
5
5. Replace the metal
retainer ring around the
top of the eyecup. Wipe
o any fingerprints from
the eyepiece.
6. Mount the eyecup
assembly onto the
camera by screwing it
onto the viewfinder.
When the assembly is
fully screwed on, open
the eyepiece shutter to
lock the eyepiece.
6
ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser to be free from defects in
materials and workmanship under normal consumer use for a period of one (1) year
from the original purchase date or thirty (30) days after replacement, whichever occurs
later. The warranty provider’s responsibility with respect to this limited warranty shall
be limited solely to repair or replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves the right
to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty provides you with specific legal rights, and you may also have additional
rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product
to Vello along with the RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer
Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
© Copyright 2015 Vello Inc.
All other trademarks are the property of their respective owners
GG2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Vello EPN-DK19 User manual

Vello
Brand
Vello
Model
EPN-DK19
Category
Warranty & support extensions
Type
User manual

Vello EPN-DK19 is a rubber eyepiece designed for select Nikon cameras. It enhances comfort, blocks stray light, and prevents scratches to eyeglasses. Installation is simple: remove the standard eyepiece, attach the metal retainer ring, insert the camera's eyepiece into the Vello eyecup, replace the retainer ring, and screw the assembly onto the camera. Enjoy improved viewing comfort and reduced glare while shooting outdoors or in bright conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents