the great outdoors by Minka Lavery 9151-A357 Operating instructions

Brand
the great outdoors by Minka Lavery
Model
9151-A357
Type
Operating instructions

The great outdoors by Minka Lavery 9151-A357 is a versatile and stylish lighting fixture designed to illuminate your outdoor spaces with ease and elegance. With its sturdy construction and weather-resistant design, this fixture can withstand the elements and provide reliable illumination for years to come.

Installing the 9151-A357 is a straightforward process that can be completed in a few simple steps. The fixture comes with detailed instructions and all the necessary hardware for a quick and hassle-free installation.

Once installed, the 9151-A357 provides ample illumination for your outdoor areas. Its powerful LED bulbs cast a bright and evenly distributed light, ensuring that your surroundings are well-lit and safe for nighttime activities. The fixture's adjustable design allows you to customize the lighting angle to suit your specific needs.

The great outdoors by Minka Lavery 9151-A357 is a versatile and stylish lighting fixture designed to illuminate your outdoor spaces with ease and elegance. With its sturdy construction and weather-resistant design, this fixture can withstand the elements and provide reliable illumination for years to come.

Installing the 9151-A357 is a straightforward process that can be completed in a few simple steps. The fixture comes with detailed instructions and all the necessary hardware for a quick and hassle-free installation.

Once installed, the 9151-A357 provides ample illumination for your outdoor areas. Its powerful LED bulbs cast a bright and evenly distributed light, ensuring that your surroundings are well-lit and safe for nighttime activities. The fixture's adjustable design allows you to customize the lighting angle to suit your specific needs.

INSTALLATION INSTRUCTION
For item#9151-A357 (Rev. 05/05/2012)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR
Fig. 3
Fig. 2
Fig. 1
LA-2068E
MOUNTING THE BACKPLATE (Fig.1)
1. Shut off the power at the circuit breaker and remove
the old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any
small parts necessary for installation.
3. Attach the mounting plate (A) to the junction box
with screws (B). The side of the mounting plate
marked “GND” must face out.
4. Install screws (C) into the mounting plate (A) equal
distance apart to align with the mounting holes on
back plate (D).
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors are secured. If
your outlet box has a ground wire (green or bare
copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly
to the mounting plate using the green screw
provided. After the wires are connected carefully
tuck them inside the junction box.
COMPLETING THE INSTALLATION
6. Place the back plate (D) over screws (C), and
secure with cap nuts (E).
7. Notice: To comply with UL Standards and maintain
product warranty, use clear silicone sealant to
outline the outside of the fixture back plate where it
meets the wall to prevent moisture from entering the
junction box while leaving a space at the bottom to
allow moisture to escape (Fig 4.). Failure to do so
will void any expressed warranty.
8. Install the 1*60W medium base bulb (G) (not
included) into socket (F) in accordance with the
fixture’s specification. Note: To prevent damage to
the bulb during installation, hold the bulb by the base
only while installing into the socket. (DO NOT
EXCEED THE SPECIFIED WATTAGE!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return the power
to the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
BACKPLATE
CAULKING
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
A
G
F
B
C
D
E
  • Page 1 1

the great outdoors by Minka Lavery 9151-A357 Operating instructions

Brand
the great outdoors by Minka Lavery
Model
9151-A357
Type
Operating instructions

The great outdoors by Minka Lavery 9151-A357 is a versatile and stylish lighting fixture designed to illuminate your outdoor spaces with ease and elegance. With its sturdy construction and weather-resistant design, this fixture can withstand the elements and provide reliable illumination for years to come.

Installing the 9151-A357 is a straightforward process that can be completed in a few simple steps. The fixture comes with detailed instructions and all the necessary hardware for a quick and hassle-free installation.

Once installed, the 9151-A357 provides ample illumination for your outdoor areas. Its powerful LED bulbs cast a bright and evenly distributed light, ensuring that your surroundings are well-lit and safe for nighttime activities. The fixture's adjustable design allows you to customize the lighting angle to suit your specific needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents