True Manufacturing GDM-10F Datasheet

Type
Datasheet

This manual is also suitable for

Glass Door Reach-In Freezers -
Single Door
GDM-5F-PT, GDM-7F, GDM-10F,
GDM-12F, GDM-23F, GDM-26F
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
CABINET CONSTRUCTION:
Durable and permanent non-peel or chip white vinyl exterior.
White aluminum interior cabinet liner with 300 series stainless steel floor.
Construction of liner in accordance with NSF standards.
Cabinet mounted on a welded, galvanized frame rail, painted for additional
corrosion protection.
Safety shielded fluorescent interior lighting. Integrated door light standard
on GDM-23F and GDM-26F.
Rear wall airflow guard and floor rack prevent frozen product from
blocking optimal airflow (excludes GDM-5F-PT, GDM-7F).
DOORS:
Triple pane thermal insulated glass. Doors extend full width of cabinet
shell. Door gaskets of one piece construction.
Adjustable, self closing, torsion type closure system with aluminum block
supports. The face of each door fitted with a 12" long handle.
INSULATION:
Entire cabinet structure insulated using foamed-in-place CFC free
polyurethane foam.
SHELVING:
Adjustable vinyl coated wire shelves included. Shelves capable of supporting
up to 250 lbs.
Full height shelf support pilasters, with double oblong holes on 1/2"
centers. Pilasters made of the same material as cabinet interior. Four (4)
chrome plated, stainless steel shelf clips to be included for each shelf.
REFRIGERATION SYSTEM:
Refrigeration system factory balanced using CFC free R404A refrigerant.
Bottom mounted condensing unit - easy access for maintenance.
Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain -10°F interior cabinet temperature. (non-adjustable capillary
tube system superior to problematic expansion valve)
Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
Unit completely pre-wired at factory, and ready for final connection to
appropriate outlet (see diagram below and NEMA listing next page). A
cord and plug set to be included.
A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE is the world’s largest manufacturer of
glass door merchandisers.
GDM-12F
Also available:
Slide Door Refrigerators
Wine Merchandiser
Rear Load Models
Ice Merchandisers
Glass End Merchandisers
Convenience Store Coolers
Counter-Top Merchandisers
Floral Merchandisers
GDM Freezer Series -
Glass Door Merchandisers
GDM-5F-PT
GDM-7F
GDM-10F
GDM-12F
GDM-23F
GDM-26F
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
Exceptions:
Printed in
U.S.A.
2/03
APPROVALS:
Specifications subject to change without notice.
Remote cabinets and condensing units available for models
GDM-23F, GDM-49F, and GDM-72F.
For other models
remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
115/60/1
NEMA-5-15R
115/60/1
NEMA-5-20R
Dimensions Cord
Capacity # of (inches) NEMA Length Crated
Model Doors (Cu. Ft) Shelves L D* H HP Volts PH Amps Config. (feet) Weight
GDM-5F-PT 2 5 2 24 24 37 1/2 115 1 9.8 5-15 9 220
GDM-7F 1 7 2 1/2 24 24 3/4 39 3/4 1/2 115 1 7.0 5-15 9 250
GDM-10F 1 10 3 24 13/16 23 56 3/16 1/2 115 1 8.8 5-15 9 275
GDM-12F 1 12 3 24 13/16 23 65 1/2 1/2 115 1 9.0 5-15 9 300
GDM-23F 1 23 4 27 29 1/2 78 1/4 3/4 115 1 12.2 5-20 9 412
GDM-26F 1 26 4 30 29 1/2 78 1/4 3/4 115 1 12.2 5-20 9 421
®
GDM Series: Glass Door Freezers - Single Door
GDM-5F-PT GDM-7F GDM-10F
* Depth does not include 1 3/8 for door handle (GDM-5F-PT has handles front and back).
Black, rosewood, and walnut vinyl exterior available at no extra charge.
GDM-7F height includes 2 1/2 legs.
Oversized and balanced, environmentally
friendly R404A refrigeration system - holds
-10°F.
White laminated vinyl exterior.
White, vinyl coated aluminum interior
and 300 series stainless steel bottom (NSF
approved).
Standard backguard and floor rack
improve airflow (excludes GDM-5F-PT,
GDM-7F).
Fluorescent interior lighting.
Integrated door light on GDM-23F and
GDM-26F models.
Positive seal, torsion type closure system,
self-closing doors.
Adjustable vinyl coated wire shelves.
Triple pane thermal glass.
Epoxy coated evaporator.
Large evaporator and coil heater permit
short defrost cycle.
Defrost system time initiated, temperature
terminated.
Automatic evaporator fan motor delay
during defrost cycle.
Bottom mount compressor.
Slide out compressor can be serviced easily
and accessed by a single repairman.
Black, walnut and rosewood vinyl exterior
available.
Novelty Baskets.
Additional shelves available.
2 1/2 castors available for GDM-10F,
GDM-12F, GDM-23F, GDM-26F.
Stainless steel or optional seismic legs
available for GDM-23F, GDM-26F.
Remote available for GDM-23F.
Standard Features ____________________________________________________________________________________________
Optional Accessories ______________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
GDM-12F GDM-23F GDM-26F
Specifications subject to change without notice.
78
1
/
4
"
28"
29
1
/
2
"
30"
L - 77 cm
D - 75 cm
H - 199 cm
Door
Swing - 72 cm
54
5
/
16
"
9
1
/
4
"
12"
57
1
/
2
"
25"
29
1
/
2
"
27"
L - 69 cm
D - 75 cm
H - 199 cm
Door
Swing - 64 cm
78
1
/
4
"
54
5
/
16
"
9
1
/
4
"
12"
54
1
/
2
"
23"
23
1
/
4
"
24
13
/
16
"
L - 63 cm
D - 59 cm
H - 167 cm
Door
Swing - 59 cm
46
1
/
4
"
64
1
/
2
"
1"
51
3
/
4
"
23
3
/8"
23"
56
3
/16"
24
13
/
16
"
42
3
/8"
7
1
/2"
5
15
/16"
46
3
/8"
L - 63 cm
D - 59 cm
H - 143 cm
Door
Swing - 59 cm
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Model Front Right Plan 3D
GDM-5F-PT
GDM-7F TFD033E TFD033S TFD033P TFDY333
GDM-10F TFD020E TFD020S TFD020P TFD0203
GDM-12F TFAY57E TFAY57S TFAY55P TFAY573
GDM-23F TFAZ03E TFAY03S TFAZ03P TFAZ033
GDM-26F TFAY09E TFAY09S TFAY09P TFAY093
1 year parts & labor warranty (USA).
5 year compressor warranty.
See our website www.truemfg.com for
the latest color & sign offerings.
Clearance Required For Coolers (USA)
Sides* Top* Rear
Inches/mm Inches/mm Inches/mm
1 / 26 1 / 26 3 / 77
* GDM-5F-PT, GDM-7F & GDM-10F only.
KCL
24
3
/
4
"
24"
39
3
/
4
"
47
1
/
8
"
2
1
/
2
"
1
3
/
4
"
22
3
/
8
"
37
1
/
4
"
36
5
/
16
"
Door
Height
L - 61 cm
D - 63 cm
H - 101 cm
Door
Swing - 57 cm
L - 61 cm
D - 61 cm
H - 94 cm
Door
Swing (2) - 56 cm
26"
door size
24"
8
1
/
2
"
37"
24"
68"
22"
  • Page 1 1
  • Page 2 2

True Manufacturing GDM-10F Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI