Sony KDS-Z60XBR5 User manual

Brand: Sony

Model: KDS-Z60XBR5

Category: LCD TVs

Type: User manual

3-271-374-12(1)

Printed in Japan

Printed on 70% or more recycled paper.

SXRD Projection TV

Operating Instructions

KDS-Z60XBR5

KDS-Z70XBR5

For Your Convenience

Please contact Sony directly if you:

• Have questions on the use of your television after reading your Operating Instruction manual

and Quick Setup Guide

• Experience difﬁculty operating your television

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

or to speak with a support representative:

United States

1-800-222-SONY (7669)

Canada

1-877-899-SONY (7669)

Sony will work to resolve your questions more quickly than your retailer or place of purchase.

Please Do Not Return the Product to the Store

WARNING

To reduce the risk of fire or electric shock, do

not expose this TV to rain or moisture.

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the TV’s enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the TV.

The TV shall not be exposed to dripping or

splashing and no objects filled with liquids,

such as vases, shall be placed on the TV.

CAUTION

To prevent electric shock, do not use this

polarized AC plug with an extension cord,

receptacle or other outlet unless the blades can

be fully inserted to prevent blade exposure.

NOTIFICATION

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

s Reorient or relocate the receiving antenna.

s Increase the separation between the

equipment and receiver.

s Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

s Consult the dealer or an experienced radio/

TV technician for help.

Safety

s Operate the TV only on 120 V AC.

s Use the AC power cord specified by Sony

and suitable for the voltage where you use

it.

s The plug is designed, for safety purposes,

to fit into the wall outlet only one way. If

you are unable to insert the plug fully into

the outlet, contact your dealer.

s If any liquid or solid object should fall

inside the cabinet, unplug the TV

immediately and have it checked by

qualified service personnel before

operating it further.

s If you will not be using the TV for several

days, disconnect the power by pulling the

plug itself. Never pull on the cord.

s When disconnecting AC power cord, the

power cord should be easily accessible for

disconnection.

s For details concerning safety precautions,

see “Important Safety Instructions” on

page 6.

Installing

s The TV should be installed near an easily

accessible power outlet.

s To prevent internal heat buildup, do not

block the ventilation openings.

s Do not install the TV in a hot or humid

place, or in a place subject to excessive

dust or mechanical vibration.

s Use the TV at temperatures between 41°F

(5°C) and 95°F (35°C).

s If the TV is transported directly from a cold

to a warm location, or if the room

temperature changes suddenly, the picture

may be blurred or show poor color due to

moisture condensation. In this case, please

wait a few hours to let the moisture

evaporate before turning on the TV.

s To obtain the best picture, do not expose

the screen to direct illumination or direct

sunlight. It is recommended to use spot

lighting directed down from the ceiling or

to cover the windows that face the screen

with opaque drapery. It is desirable to

install the TV in a room where the floor and

walls are not of a reflective material.

CAUTION

Use the following Sony TVs with the following

TV-stand.

Use with other TV-stands may cause instability

and possibly result in injury.

To Customers

Sufficient expertise is required for installing

the specified TV. Be sure to subcontract the

installation to a Sony dealer or licensed

contractor and pay adequate attention to safety

during the installation.

Note

This television includes a QAM demodulator

which should allow you to receive

unscrambled digital cable television

programming via subscription service to a

cable service provider. Availability of digital

cable television programming in your area

depends on the type of programming and signal

provided by your cable service provider.

Trademark Information

Macintosh is a trademark of Apple Inc.,

registered in the U.S. and other countries.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing

LLC.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

Blu-ray Disc is a trademark.

SXRD, “BRAVIA” and ,

Motionflow, Photo TV HD, S-Force, BRAVIA

Theatre Sync, , DMe

and “x.v. Color” are

trademarks or registered marks of Sony

Corporation.

“XMB” and “xross media bar” are the

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

“PLAYSTATION” is a registered trademark

and “PS3” is a trademark of Sony Computer

Entertainment Inc.

Adobe is a registered trademark or a trademark

of Adobe Systems Incorporated in United

States and/or other countries.

Owner’s Record

The model and serial numbers are located

at the rear of the TV. Record these

numbers in the spaces provided below.

Refer to them whenever you call upon

your Sony dealer regarding this TV.

Model Name

Serial No.

Declaration of Conformity

Trade Name: SONY

Model: KDS-Z60XBR5/KDS-Z70XBR5

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone Number: 858-942-2230

This device complies with part 15 of the

FCC rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and (2)

this device must accept any interference

received, including interference that may

cause undesired operation.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

PRECAUCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

Pursuant to FCC regulations, you are

cautioned that any changes or modifications

not expressly approved in this manual could

void your authority to operate this

equipment.

Sony TV Model No.

KDS-Z60XBR5/KDS-Z70XBR5

Sony TV-Stand

Model No.

SU-RS52U

Quick Setup Guide (separate volume)

Provides a variety of optional equipment

connection diagrams.

Customer Support

http://www.sony.com/tvsupport

On-line Registration

United States

http://productregistration.sony.com

Canada

http://www.SonyStyle.ca/registration

Contents

Important Safety Instructions ............................6

Welcome to the World of BRAVIA™

The Four Steps to Full HD Experience:

Set, Sound, Source, and Setup ....................8

Picture Quality and Aspect Ratio.......................8

TV Home Menu: XMB

™

(XrossMediaBar)..........9

Getting Started

1. Installing the TV.............................................10

Carrying Your TV..........................................10

Preventing the TV from Toppling Over.........10

When Installing Your TV against a Wall .......11

Recommended Viewing Area.......................12

Screen ..........................................................12

Projection Lamp............................................12

2. Locating Inputs and Outputs .......................13

Left Side .......................................................13

Left Side Rear...............................................14

3. Connecting the TV.........................................17

Cable System or VHF/UHF Antenna

System ......................................................17

Cable System and VHF/UHF Antenna

System ......................................................17

HD Cable Box/HD Satellite Box....................17

PC.................................................................19

Other Equipment ..........................................20

Using HDMI Control for BRAVIA Theatre

Sync™.......................................................21

Bundling the Connecting Cables ..................21

4. Setting Up the Channel List

– Initial Setup ...............................................22

Using the TV Features

Remote Control and TV Controls/

Indicators .....................................................23

Inserting Batteries into the Remote

Control ......................................................23

Remote Control and TV Controls .................23

Indicators......................................................28

Programming the Remote Control...................29

Operating Sony Brand Video

Equipment.................................................29

Programming Non-Sony Video

Equipment.................................................29

Using Other Equipment with Your Remote

Control..........................................................31

Using P&P and PIP Features............................34

To Display the Sub Window .........................34

To Change Inputs or Channels in the

Window .....................................................34

To Change the Window Size of P&P............34

To Exit from P&P and PIP ............................34

Using the Menus

Adjusting TV Settings .................................35

Watching TV.................................................35

Accessing the Equipment Connected to

Your TV.........................................................35

Navigating through TV Home Menu on

XMB

™

............................................................36

(Continued)

TV Setting Description......................................37

Product Support .....................................37

Clock/Timers Settings ............................37

Picture Settings ...................................... 37

Sound Settings ....................................... 39

Screen Settings ......................................40

Video Options Settings...........................42

Audio Options Settings...........................43

Channel Settings ....................................44

Closed Captions (CC) Settings .............. 45

Parental Lock Settings ........................... 45

External Inputs Settings ......................... 47

HDMI Settings ........................................48

General Settings..................................... 48

Initial Setup............................................. 48

Other Information

Replacing the Lamp.......................................... 49

How to Replace the Lamp ............................ 49

Troubleshooting................................................ 52

Specifications.................................................... 56

Index................................................................... 57

Important

Safety

Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of

the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the other.

A grounding type plug has two

blades and a third grounding prong.

The wide blade or the third prong are

provided for your safety. If the

provided plug does not fit into your

outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14) Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such as

power-supply cord or plug is

damaged, liquid has been spilled or

objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

s Be sure to observe the TV’s “For Safety” section on page 7.

Antennas

Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An

outdoor antenna system should not be located in the vicinity of overhead

power lines or other electric light or power circuits, or where it can come

in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,

EXTREME CARE SHOULD BE TAKEN TO KEEP FROM

CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT

WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection

against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in USA and Section

54 of the Canadian Electrical Code in Canada provides information with

respect to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the NEC

Refer to section 54-300 of Canadian Electrical Code for Antenna

Grounding.

Antenna lead-in

wire

Ground clamps

Antenna discharge

unit (NEC Section

810-20)

Grounding

conductors (NEC

section 810-21)

Power service grounding

electrode system (NEC

Art 250 Part H)

Ground clamp

Electrical

service

equipment

NEC: National

Electrical Code

Electric shock

Do not touch the AC power cord or the TV with a wet

hand. If you plug/unplug the AC power cord from the TV

with a wet hand, it may cause electric shock.

Cleaning

s Clean the rear cover area of the TV regularly. Dust in the rear cover

area may cause a problem with the cooling system of the TV set.

s Clean the cabinet of the TV with a dry soft cloth.

To remove dust from the screen, wipe it gently

with a soft cloth. Stubborn stains may be

removed with a cloth slightly dampened with

solution of mild soap and warm water. Never use

strong solvents such as thinner or benzine for cleaning. If the picture

becomes dark after using the TV for a long period of time, it may be

necessary to clean the inside of the TV. Consult qualified service

personnel.

s Unplug the AC power cord when cleaning this unit.

Cleaning this unit with a plugged AC power cord

may result in electric shock.

On Contamination on the Screen Surface

The screen surface has a special coating to reduce reflections. To prevent

screen damage, clean the screen as follows:

s Clean the screen with a soft cloth.

s To remove hard contamination, use a cloth moistened with a solution

of mild detergent and water. Do not spray cleaning solution directly

onto the TV. It should only be sprayed to moisten the cleaning cloth.

s Do not use any type of abrasive pad, alkaline cleaner, acid cleaner,

scouring powder, chemical cloth, or solvent such as alcohol, benzene

or thinner, as these may scratch the screen’s coating.

Service

Damage Requiring Service

Do not attempt to service the set by yourself since

opening the cabinet may expose you to dangerous

voltage or other hazards.

Unplug the set from the wall outlet and refer servicing to

qualified service personnel.

Replacement Parts

When replacement parts are required, be sure the service technician

certifies in writing that he has used replacement parts specified by the

manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock or other

hazards.

See “Replacing the Lamp” on page 49.

For Safety

Be Careful When Moving the

When you place the TV in position, be careful

not to drop it on your foot or fingers.

Watch your footing while installing the TV.

Carry the TV in the Specified

Manner

If you carry the TV in a manner other than the specified manner and

without the specified number of persons, it may drop and a serious injury

may be caused. Be sure to follow the instructions mentioned below.

s Carry the TV with the specified number of persons (see page 10).

s Hold the TV tightly when carrying it.

s Before carrying the TV, disconnect any accessories or cables.

For Safe Operations

Always switch off by pressing POWER button on the remote or the TV

first to ensure proper lamp cooling process.

Caution

Do not use the TV at altitudes higher than 3,000 m, as doing so might

cause malfunction.

About the TV

Although the TV is made with high-precision technology, black dots may

appear or bright points of light (red, blue, or green) may appear constantly

on the screen. This is a structural property of the panel and is not a defect.

Installation

s If direct sunlight or other strong illumination shines on the screen,

part of the screen may appear white due to reflections from behind the

screen. This is a structural property of the TV.

Do not expose the screen to direct illumination or direct sunlight.

s The picture quality may be affected by your viewing position. For the

best picture quality, install your TV according to “Recommended

Viewing Area” on page 12.

s When installing your TV against a wall, keep it at least 4 inches (10

cm) away from the wall.

Projection Lamp

s Your TV uses a projection lamp as its light source. It is time to replace

the lamp with a new one (not supplied) when:

• the message, “Projection lamp is nearing end of life. Please

replace the lamp.” appears on the screen,

• the lamp replacement indicator on the front panel blinks in red,

• screen images become dark,

• no image appears on the display after prolonged use.

s In rare instances, the bulb may pop inside the lamp unit, but the lamp

unit is designed to contain all of broken glass pieces inside the lamp

unit. (See “Replacing the Lamp” on page 49.)

s When the lamp eventually burns out, you may hear a noticeable pop

sound. This is normal and is inherent in this type of lamp.

Cooling Fans

This TV uses cooling fans. You may hear the noise of fans running,

depending on the placement of your TV. The noise may be more

noticeable during the night or when the background noise level is low.

Disposal of Used Batteries

To preserve our environment, dispose of used batteries according to your

local laws or regulations.

For Customers in the United States

Lamp in this product contains mercury. Disposal of

these materials may be regulated due to

environmental considerations. For disposal or

recycling information, please contact your local

authorities or the Electronic Industries Alliance

(http://www.eiae.org).

Welcome to the World of BRAVIA™

The Four Steps to Full HD Experience: Set, Sound, Source, and Setup

Along with your BRAVIA TV set, a complete HD system requires an HD sound system, a

source of HD programming and proper setup connections. This manual explains basic setup

connections (see page 17). The Quick Setup Guide, enclosed separately, illustrates how to

connect other optional equipment.

Thank you for purchasing this Sony BRAVIA™ high-definition television. The quality of the image

you see on your BRAVIA TV is only as good as the quality of the signal it receives. To experience

the full detail of your new BRAVIA TV, you need access to HD programming. Your BRAVIA TV can

receive and display HD programming from:

• Over-the-air broadcasting via HD-quality antenna

• HD cable subscription

• HD satellite subscription

• Blu-ray Disc™ Player or other external equipment

Contact your cable or satellite provider for information on upgrading to HD programming.

To learn more about HDTV, visit: http://www.sony.com/HDTV

Picture Quality and Aspect Ratio

You can enjoy crisp, clear images, smooth movement and high-impact visuals from 1080 HD

signals. When you compare a high-definition signal to a standard analog signal, you will notice

a big difference. The 1080 HD signals provide more than twice the vertical resolution of the

standard TV signal.

High-definition and standard-definition signals are transmitted with different aspect ratios (the

width-to-height ratio of the image). HDTV uses a wider screen than conventional standard-

definition TV.

• You can use the Wide Mode function of the TV to adjust the 4:3 image to fit the entire screen (see pages 26, 40

and 42).

16:9 (high-definition) source

Most HDTV signals use a wide screen aspect rati

of 16:9. The 16:9 fills your BRAVIA screen and

maintains a crisp, clear, vivid picture.

4:3 (standard-definition) source

Most standard-definition signals use a boxy 4:3

aspect ratio. When a 4:3 image is displayed on an

HDTV, you will see black bars on the sides. The

picture quality may not be as sharp as with HD

sources.

TV Home Menu: XMB

™

(XrossMediaBar)

The XMB

™

is a menu of BRAVIA features and input sources displayed on the TV screen. The

XMB

™

is an easy way to select programming and adjust settings on your BRAVIA TV. Press the

HOME button on your remote control to access the XMB

™

From the horizontal Media Category Bar you can control:

• Settings: timer, picture, sound, screen and other options (see page 37 for customization

options).

• TV Channels: available channels are displayed on the vertical Category Object Bar.

• External Inputs: cable, satellite, VCR, DVD players or other inputs can also be selected

from the Category Object Bar for the External Inputs.

Product Support

Clock/Timers

Sound

Screen

Video Options

Settings

Category Object Bar

Media

Category

Bar

Getting Started

1. Installing the TV

Carrying the TV requires four people.

Do not carry the TV by grasping only the front

panel. Avoid holding the bottom middle part of the

screen. Doing so may damage the panel.

When moving the TV, hold it as shown in the

illustration below.

When lifting the rear and side, place the hands in

the holes on the lower portion of the cabinet.

Two persons should lift and support from the front,

while the other two lift the sides.

If you have connected cables and cords, be sure to

unplug them before moving the TV.

To ensure the safety of children and the TV, keep

children away from the TV during installation.

Climbing on or pushing the TV or its stand may

cause it to fall and may damage the TV.

As a protective measure, secure the TV as follows.

Using the TV stand SU-RS52U

Sony strongly recommends using the TV stand

SU-RS52U.

To secure the TV, use the two shafts and two

screws that were securing the Table-Top Stand.

Fasten the two shafts first, and then fasten the two

screws.

• For more information, refer to the instruction guide

provided by the TV stand SU-RS52U.

Carrying Your TV

Preventing the TV from Toppling Over

Shaft

Screw

Getting Started

When using other TV stands

1 Screw the support belt (supplied) to the TV

stand with a wood screw (supplied).

2 Attach the support belt to the Table-Top Stand

with the securing screw (supplied) using a

coin, etc.

3 Adjust the length by pulling the support belt

toward you while holding the Table-Top

Stand.

• Be sure to take measures to prevent the TV from

toppling over and causing injury.

• The supplied wood screw may not be used depending

on the type of TV stand. In this case, or when the

securing strength is not enough, use commercial

screws

/8 to

/16 inch (3 to 4 mm) diameter to fit to the

TV stand. Consult your dealer about the types of

screw(s).

Keep your TV at least 4 inches (10 cm) away from

the wall to provide proper ventilation. Blocking

the ventilation opening of the cooling fan may

damage the TV.

• Do not install the TV near any ventilation, as it may

affect the normal TV operating temperature.

• Be sure that the ventilation opening on the side of the

TV is not blocked by curtains or other materials.

• Dirt may accumulate near the ventilation when the TV

is placed against the wall depending on its material.

stand

Table-Top

Stand

When Installing Your TV against a Wall

12 inches

(approx. 30 cm)

4 inches

(10 cm)

4 inches

(10 cm)

Never install the TV as follows:

Air circulation is blocked.

Air blown into cooling fan.

Your viewing position may affect the picture

quality.

For the best picture quality, install your TV within

the areas shown below.

To minimize reflection, the screen surface has a

special coating.

Inappropriate cleaning methods could damage the

screen surface. Special care is required.

Cleaning the Screen Surface

Dust and dirt on the screen can affect the picture

quality. To dust off the screen use a soft cloth. Be

sure to follow the cleaning instruction on page 7

for stubborn stains and dirt.

Temporary Image Retention

When high contrast non-moving images such as

station logos and channel numbers are displayed

for a long period of time, there may be some image

retention on the screen. This is only a temporary

condition. Turning off the power for a while or

letting the TV run on another channel will

eliminate the image retention.

Your TV uses a projection lamp as its light source.

As with any lamp, it has a lifespan and needs to be

replaced when the Lamp Indicator flashes or the

screen becomes darker. Your TV also has a

function to display a message, “Projection lamp is

nearing end of life. Please replace the lamp.” to let

you know that the lamp has reached its expected

lifespan. Note the following:

s After turning on your TV, it may take a while

(one minute or less) before the picture

appears.

s When the projection lamp wears out, the

screen goes dark. Replace the lamp with a

new Sony XL-5200 replacement lamp (not

supplied).

s After lamp is replaced, please set the Lamp

Replacement option in the General

settings (see page 48).

“How to Replace the Lamp”, see page 49.

• The light emitted from the lamp is quite bright when

your TV is in use. To avoid eye discomfort or injury,

do not look into the light housing when the power is

on.

Recommended Viewing Area

Model Viewing distance

KDS-Z60XBR5

KDS-Z70XBR5

min. 7.0 ft. (approx. 2.2 m)

min. 8.0 ft. (approx. 2.4 - 2.5 m)

65.

65˚

min

6.6 ft

6.6 ft.

(app

rox.

2.0 m)

50"

60 inches min. 7.0 ft. (approx. 2.2 m)

70 inches min. 8.0 ft. (approx. 2.4

2.5 m)

55 in

hes min

6.8 ft

(app

rox.

2.1 m)

60 in

hes min

7.0 ft

(app

rox.

2.2 m)

60 inches min. 7.0 ft. (approx. 2.2 m)

70 inches min. 8.0 ft. (approx. 2.4

2.5 m)

30˚

Horizontal Viewing Area

Vertical Viewing Area

Screen

Projection Lamp

Getting Started

2. Locating Inputs and Outputs

Left Side

Item Description

1 HDMI IN 2/3

HDMI

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital

audio/video interface between this TV and any HDMI-equipped audio/video equipment,

such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC.

HDMI supports enhanced, or high-definition video, plus digital audio.

• HDMI connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/24p

formats. Note that this TV displays all video input signals in a resolution of 1,920 dots

× 1,080 lines.

• Be sure to use only an HDMI cable that bears the HDMI logo.

• When HDMI control compatible equipment is connected, communication with the

connected equipment is supported. Refer to page 48 to set up this communication.

• When connecting a HDMI control compatible audio system with HDMI jack, be sure to

also connect to the OPTICAL OUT jack.

2 VIDEO 2 IN

VIDEO/

L(MONO)-

AUDIO-R

Connects to the composite video and audio output jacks on your A/V equipment such as

a VCR or other video equipment.

VIDEO

AUDIO

L (MONO)

2 IN

3 IN

VIDEO 2 IN

Left Side Rear

DIGITAL

AUDIO

OUT

(OPTICAL)

S VIDEO

VIDEO

AUDIO

(MONO)

AUDIO

RGB

DMe

SERVICE

REMOTE

VIDEO IN

HDMI IN

AUDIO OUT

(VAR/FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

PC IN

(VAR/FIX)

VHF/UHF/CABLE

5 6 7 8

Press the two clamps to open

the cover.

Getting Started

Item Description

1 HDMI IN 1

HDMI/

R-AUDIO-L

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital

audio/video interface between this TV and any HDMI-equipped audio/video equipment,

such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC.

HDMI supports enhanced, or high-definition video, plus digital audio.

2 HDMI IN 4

HDMI

If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the

HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the

AUDIO IN (L/R) jacks of HDMI IN 1.

• HDMI connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/24p

formats. Note that this TV displays all video input signals in a resolution of 1,920 dots ×

1,080 lines.

• Be sure to use only an HDMI cable that bears the HDMI logo.

• When HDMI control compatible equipment is connected, communication with the

connected equipment is supported. Refer to page 48 to set up this communication.

• When connecting an HDMI control compatible audio system with HDMI jack, be sure

to also connect to the OPTICAL OUT jack.

3 PC IN

(RGB/AUDIO)

Connects to a personal computer’s video output connector using an HD15-HD15 cable

with ferrite core (analog RGB, not supplied). Can also be connected to other analog RGB

equipment.

See “PC Input Signal Reference Chart” on page 19 for the signals that can be displayed.

• For some Apple Macintosh computers, it may be necessary to use an adapter (not

supplied). If this is the case, connect the adapter to the computer before connecting the

HD15-HD15 cable with ferrite core.

• If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen

settings on page 41.

4 VHF/UHF/CABLE RF input that connects to your Cable or VHF/UHF antenna.

5 VIDEO IN 1

S VIDEO

Connects to the S VIDEO output jack of your VCR or other video equipment that has

S VIDEO. The S VIDEO provides better picture quality than composite video (6)

connection.

If both composite video and S VIDEO are connected, S VIDEO signal has priority.

6 VIDEO IN 1/3

VIDEO/

L(MONO)-

AUDIO-R

Connects to the composite video and audio output jacks on your A/V equipment such as

a VCR or other video equipment.

7 COMPONENT IN

1/2 (1080p/1080i/

720p/480p/480i)/

L-AUDIO-R

Connects to your equipment’s component video (YP

BPR) output jack and audio (L/R)

jacks. Component video provides better picture quality than the S VIDEO (5) or the

composite video (6) connection.

• Component video (YPBPR) connection is necessary to view 480i, 480p, 720p, 1080i and

1080p formats. Note that this TV displays all video input signals in a resolution of

1,920 dots × 1,080 lines.

8 AUDIO OUT

(VAR/FIX)

Connects to the left and right audio input jacks of your analog audio equipment. You can

use these outputs to listen to your TV’s audio through your stereo system.

DVI-to-HDMI cable

DVI-to-HDMI adapter

Audio cable

(Continued)

9 DIGITAL AUDIO

OUT (OPTICAL)

Connects to the optical audio input of your digital audio equipment that is PCM/Dolby

Digital compatible. Dolby Digital Audio signal from the HDMI input will be output as

PCM. Dolby Digital Audio signal from digital channels will be output as it is.

0 DMe

/ SERVICE This USB port is for service only unless you are connecting the optional BRAVIA

external module (DMe

qa REMOTE This jack is for receiving the external control signal.

Item Description

Getting Started

3. Connecting the TV

You can enjoy high-definition and standard-

definition digital programming (if available in

your area) along with standard-definition analog

programming.

• This TV is capable of receiving unscrambled digital

programming for both cable (QAM and 8VSB) and

external VHF/UHF antenna (ATSC).

• It is strongly recommended that you connect the

antenna/cable input using a 75-ohm coaxial cable to

receive optimum picture quality. A 300-ohm twin lead

cable can be easily affected by radio frequency

interference, resulting in signal degradation.

Cable or VHF/UHF (or VHF only)

Use an optional A-B RF switch (not supplied) to

switch between the cable and over-the-air antenna

programming, as indicated below.

• Be sure to set the Cable setting to On or Off in the

Channel settings for the type of input signal you

choose (see page 44).

You can also enjoy high-definition programming

by subscribing to a high-definition cable service or

a high-definition satellite service. For the best

possible picture, make sure you connect this

equipment to your TV via the HDMI or

component video (with audio) input on the back of

your TV.

Cable System or VHF/UHF Antenna

System

Cable System and VHF/UHF Antenna

System

75-ohm coaxial

cable

Side rear of TV

VHF/UHF/CABLE input

Cable

Antenna

A-B RF switch

Side rear of TV

VHF/UHF/CABLE input

HD Cable Box/HD Satellite Box

RGB

PC IN

HD cable box/

HD satellite box

Side rear of TV

HDMI cable

Shown with HDMI Connection

CATV/Satellite

antenna cable

(Continued)

Shown with DVI Connection

• If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI

cable or adapter) jack and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. For details, see

page 15.

RGB

PC IN

VIDEO

AUDIO

(MONO)

AUDIO

VIDEO IN

HDMI IN

AUDIO OUT

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

(VAR/FIX)

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO-L

(white)

AUDIO-R

(red)

Audio cable

HD cable box/

HD satellite box

CATV/Satellite

antenna cable

Side rear of TV

DVI-to-HDMI cable

DIGITAL

AUDIO

OUT

(OPTICAL)

S VIDEO

VIDEO

AUDIO

(MONO)

AUDIO

1 2

DMe

SERVICE

REMOTE

VIDEO IN

HDMI IN

AUDIO OUT

PC IN

(VAR/FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

Component video cable

Side rear of TV

CATV/Satellite

antenna cable

B (blue)

AUDIO-L (white)

AUDIO-R (red)

HD cable box/

HD satellite box

Y (green)

R (red)

Audio cable

Shown with Component Connection

Getting Started

Use the TV as a monitor for your PC.

Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or

HDMI output. (Refer to the separate Quick Setup Guide.)

• Connect the PC IN jack to the PC using an HD15-

HD15 cable with ferrite core (analog RGB, not

supplied) and audio cable (page 15).

PC Input Signal Reference Chart

After connecting the PC to the TV, set the output signal from the PC according to the chart below.

• This TV’s PC input does not support Sync on Green or

Composite Sync.

• This TV’s PC VGA input does not support interlaced

signals.

• When in PC input, the edge of the picture may be

cropped, or a black frame may appear around the

picture. See page 26 to adjust the screen.

• For the best picture quality, it is recommended to use

the signals (boldfaced) in the above chart with a 60 Hz

vertical frequency from a personal computer. In plug

and play, signals with a 60 Hz vertical frequency will be

detected automatically. (PC reboot may be necessary.)

S VIDEO

VIDEO

AUDIO

1 3

DMe

SERVICE

REMOTE

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

RGB

PC IN

HD15-HD15 cable

(analog RGB)

Audio cable

(stereo mini plugs)

Side rear of TV

Connect to an HDMI compatible

PC with an HDMI cable.

Resolution

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Standard

Signals Horizontal

(Pixel)

× Vertical

(Line)

VGA 640

480 31.5 60 VGA

640

480 37.5 75 VESA

720

400 31.5 70 VGA-T

SVGA

800

600 37.9 60 VESA Guidelines

800

600 46.9 75 VESA

XGA

1024

768 48.4 60 VESA Guidelines

1024

768 56.5 70 VESA

1024

768 60.0 75 VESA

WXGA

1280

768 47.4 60 VESA

1280

768 47.8 60 VESA

1280

768 60.3 75

1360

768 47.7 60 VESA

SXGA

1280

1024 64.0 60 VESA

1280

1024 80.0 75 VESA

HDTV

1920

1080 67.5 60

• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.

Other Equipment

DIGITAL

AUDIO

OUT

(OPTICAL)

RGB

PC IN

S VIDEO

VIDEO

AUDIO

(MONO)

AUDIO

DMe

SERVICE

REMOTE

VIDEO IN

HDMI IN

AUDIO OUT

(VAR/FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

PC IN

(VAR/FIX)

VHF/UHF/CABLE

VIDEO

AUDIO

L (MONO)

2 IN

3 IN

VIDEO 2 IN

DVD player

Personal

computer

Digital satellite receiver

VHF/UHF/CABLE

Digital audio equipment

Analog audio equipment

(A/V Receiver/Home Theater)

Digital

recorder

Camcorder

VCR

Blu-ray Disc Player/PS3

Game system

Digital cable box

Side rear of TV

Audio system

Personal computer

Camcorder

Page is loading ...

Sony KDS-Z60XBR5 User manual

Brand: Sony

Model: KDS-Z60XBR5

Category: LCD TVs

Type: User manual

Download PDF

report

Sony KDS-Z60XBR5 User manual

Sony KDS-Z60XBR5 User manual

Related papers

Other documents