45°
45°
45°
45°
2.36”
(60 mm)
4x .39”
(10 mm)
1.26”
(32 mm)
1.97”
(50 mm)
1.024”
(26 mm)
5757 Ravenswood Road
Ft. Lauderdale, FL 33312
+1 (954) 981-3333 Fax +1 (954) 983-5087
www.acrartex.com
info@acrartex.com
RCL-300A
Remote Control Searchlight System
Mounting Templates
Y1-03-0232-1 Rev. B
2 7/8”
(73mm)
3 23/32”
(94.5 mm)
URP-102 Point Pad
Flush Mount Template
Use U-Clamp to secure
control switch
C
L
Bolt Holes Size
2 Places 13/64”
(5.16 mm)
1”
(25.4 mm)
1 13/16”
(46 mm)
Wire Clearance Hole Size
1” Diameter Minimum
URP-102 Point Pad
Surface Mount Template
1=25.4 (mm)
SCALE 1=1 ( in.)
0
1
2
3
4
Please Note: If mounting template is obtained from the ACR website, any
electronic media, or from a photocopy, please verify the dimensions of the scale
shown with actual measuring device. Duplicate templates may not be of true
1:1 scale. Any deviation should be considered when using mounting template.
8.27”
(210 mm)
9.69”
(246 mm)