2. American Standard
  3. 270BA101S.020
270BA101S.020

American Standard 270BA101S.020 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 270BA101S.020 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K212
© 2013 AS America Inc.
7/13
CADET
®
3 RIGHT HEIGHT
®
ROUND FRONT TOILET
VITREOUS CHINA
CADET
®
3 RIGHT HEIGHT
®
ROUND FRONT TOILET
❑ 270BA.101
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•HighEfficiencyToilet(HET),ultra-lowconsumption
(4.8Lpf/1.28gpf)utilizes20%lesswater
•PowerWash
®
rimscrubsbowlwitheachush
•Includescolormatchbowlcaps
•EverClean
®
surfaceincluded
•3"ushvalve
•2-1/8"trapway
•16-1/2"rimheightforaccessibleapplications
•12"(305mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.28gpf
•5yearwarranty
❑ 3717B.001RightHeight
®
RoundFrontBowl
❑ 4021.101NTank
Nominal Dimensions:
717x441x770mm(28-1/4"x17-3/8"x30-1/4")
Fixtureonly,seatandsupplysoldseparately
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHETs
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5320.110EverClean
®
RoundFrontSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
BARRIER FREE
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDERED
SEPAR ATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherange
oftolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ'D.
220mm
(8-5/8")
717mm
(28-1/4")
30 ± 6mm
(1-1/8" ± 1/4")
92mm
(3-5/8")
419mm
(16-1/2")
441mm
(17-3/8")
770mm
(30-1/4")
419mm
(16-1/2")
*203mm
(8")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
356mm
(14")
*152mm
(6")
237mm
(9-3/8")
C/L OF OUTLET
305mm
(12")
328mm
(13")
216mm
(8-1/2")
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
Certified by
IAPMO R&T
/