Gyration Air Mouse GO Plus User manual

Gyration Air Mouse Elite

www.gyration.com

User’s Guide

11

12

)

Overview

11

12

Press the mouse connect button to

turn on the mouse. The blue LED

should flash.

Plug one end of the included USB

charging cable into the desktop

charger and the other end into an

available USB port. Place the mouse

on cradle charger and charge for 8

hours. The Battery Indicator LED’s

will progressively

flash while

charging. When all

three amber LED’s

are solid the battery

is fully charged.

Insert the USB receiver into an

available USB port on your computer.

1

2

Overview

Getting Started

Left Mouse Button

Status LED

Gesture Button

Right Mouse Button

Scroll Wheel

Battery Indication LED’s

Programmable Mouse Buttons (3)

Mouse Connect Button

In-Air Activation Trigger

Internal lithium-ion battery

2.4 GHz USB Receiver

USB Receiver Connect Button

In-Air Operation

Top Buttons

Trigger

In-Air Operation

Hold the mouse using a comfortable

handshake position. Use your index

finger to access the in-air activation

trigger and your thumb to access the top

mouse buttons.

Press and hold the in-air activation

trigger and move the cursor by flexing

only your wrist while keeping your arm

and body stationary.

8

9

Tip: Click and hold the in-air activation

trigger then move the cursor over a

target and release the trigger before

clicking. This parks the cursor over

the target and allows you to click more

accurately.

Double-clicking the in-air activation

trigger puts the Air Mouse in motion

mode where you can move the cursor

without holding the trigger.

10

11

Press the connect button on the USB

receiver.

Press the connect button on the

bottom of the mouse.

3

4

If your product includes the low

profile keyboard, turn the keyboard

over, insert the 2AAA batteries and

turn on the keyboard. Repeat step 3

then press the connect button on the

back of the keyboard.

Download MotionTools -

www.gyration.com/motiontools

The computer will automatically

detect and configure the Air Mouse.

5

6

7

Gyration – www.gyration.com

Regulatory Information

Notice to Users:

This equipment has been tested and found to comply with the limits for Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If the

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Plug the equipment into an outlet on a circuit different

from that which the receiver is plugged.

Consult the dealer or an experienced radio/TC technician for

help. This product works using a radio frequency, so use on

an airplane may be restricted due to interference.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

•

and (2) this device must accept any interference received, including interference

that may cause undesired operation. Changes or modifications not expressly

approved by the party responsible for compliance could void the user’s authority

to operate the equipment. The antenna(s) used for this transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

CE

This equipment has been tested and found to comply with the limits of the European

Council Directive on the approximation of the law of the member states relating

to electromagnetic compatibility (89/336/EEC) according to EN 55022 Class B.

Industry Canada Equipment Notice

The Industry Canada certification identifies certified equipment. This certification means

that the equipment meets certain telecommunications network protective, operational

and safety requirements as prescribed in the appropriate Terminal Equipment Technical

Document( s). The Department does not guarantee the equipment will operate to the

user’s satisfaction. Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local telecommunications company.

The equipment must also be installed using an acceptable method of connection. The

customer should be aware that compliance with the above conditions may not prevent

degradation of service in some situations. Repairs to certified equipment should be

coordinated by a representative designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the equipment.

Users should ensure, for their own protection, that the electrical ground connectors of

the power utility, telephone lines and internal metallic water pipe system, if present,

are connected together. This presentation may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should

contact the appropriate electric inspection authority or electrician, as appropriate.

Warranty Information

LIMITED TWO YEAR WARRANTY

We warrant to the original purchaser that this product (hardware or software) shall be

free from defects in material and workmanship for a period of two years from the date

of purchase (“warranty period”). Proof of purchase in the form of a legible sales receipt

indicating that the product is within the warranty period must be presented for warranty

service. If this product is determined to be defective during the warranty period, we

will either repair or replace the product with a current equivalent, at our option.

For further information contact:

Gyration

www.gyration.com

North America: 1 888 340-0033

This repair/replacement is our sole obligation under this warranty. We will not be

responsible for any incidental or consequential damages or for any loss arising in

connection with the use or inability to use this product. Some states/provinces do not

allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you. This warranty excludes defects or damage

due to misuse, abuse, or neglect. This warranty gives you specific legal rights, and

you may also have other rights, which vary from state to state/province to province.

Class 1 Laser Product

This optical device complies with International Standard IEC 60825-1 (also

known as EN 60825-1:2001) Class 1 Laser Product Invisible and also complies

with 21 CFR 1040 Laser Notice 50. Low risk to eyes, no risk to skin.

Class 1 products are defined to be safe under all

conditions including optical instruments.

Caution: Use of controls or adjustments or performance of procedures other

than those herein specified may result in hazardous radiation exposure.

Gyration Air Mouse Elite

www.gyration.com

Guide de l’utilisateur

Page is loading ...

Gyration Air Mouse Elite

www.gyration.com

Bedienungsanleitung

Page is loading ...

Gyration Air Mouse Elite

www.gyration.com

Manual de usuario

Page is loading ...

Gyration Air Mouse Elite

www.gyration.com

Gebruikershandleiding

Page is loading ...

1(888)340-0033

www.gyration.com

Gyration Air Mouse GO Plus User manual

This manual is also suitable for

Gyration Air Mouse GO Plus User manual

in other languages

Related papers

Other documents