OTC 6529-3 contains the tools needed to replace ball joints in Ford, Mazda, and Mercury vehicles. This kit includes adapters for both upper and lower ball joints on various models, making it a versatile tool for mechanics.
The kit also comes with a C-frame press, which can be used to service U-joints on most cars and light trucks. The press can be used either on or off the vehicle, providing flexibility for mechanics.
The OTC 6529-3 is a comprehensive kit that provides mechanics with the tools they need to safely and efficiently replace ball joints and service U-joints.
OTC 6529-3 contains the tools needed to replace ball joints in Ford, Mazda, and Mercury vehicles. This kit includes adapters for both upper and lower ball joints on various models, making it a versatile tool for mechanics.
The kit also comes with a C-frame press, which can be used to service U-joints on most cars and light trucks. The press can be used either on or off the vehicle, providing flexibility for mechanics.
The OTC 6529-3 is a comprehensive kit that provides mechanics with the tools they need to safely and efficiently replace ball joints and service U-joints.
Page No.
Issue Date: Rev. D, September 7, 2017
© Bosch Automotive Service Solutions Inc.
Form No. 555191
1 of 12
Parts List for: 6529-3
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Ford, Mazda Ball Joint Adapter Kit
10
12
13
14
15
16
18
17
21
19
20
22
23
24
25
11
1234
5
6
8
9
7
Parts List
1 537499 Adapter
2 554413 Adapter
3 29505 Adapter
4 554429 Adapter
5 554404 Adapter
6 554401 Adapter
7 554416 Adapter
8 554415 Adapter
9 305227 Adapter
10 38354 Adapter
11 554422 Adapter
12 204508A Adapter
13 38355A Adapter
14 314392 Plug
15 554402 Adapter
16 554403 Adapter
17 538591 Adapter
18 554417 Adapter
19 313967 Adapter
20 313444 Remover
21 554419 Adapter
22 314426 Adapter
23 305228 Adapter
24 39976 Adapter
25 531739 Adapter
Item
No. Part No. Description
Item
No. Part No. Description
© Bosch Automotive Service Solutions Inc. 2
NOTE: Models not listed most likely require the control arm with
ball joint assembly be replaced, or has a bolt-in style ball joint.
Ford
Lincoln
Mazda
Mercury
Model Year Type Position Location Removal Adapters Installation Adapters Page
Crown Victoria 1995-2002 Car Lower Front 305228, 537499, 554415 204508A, 313967 4
Crown Victoria 2003-2011 Car Lower Front 313444 38354, 554413 5
Crown Victoria 2003-2006 Car Upper Front 531739, 554419 305227, 554422, 554429 6
Fusion 2006-2012 Car Upper Front 29505, 305227, 554416 38355A, 554415 7
Mustang 1994-2004 Car Lower Front 39976, 538591 204508A, 313967 8
Mustang 2005-2008 Car Lower Front 29504, 305228, 313968 38354, 554414 9
Probe 1989-1997 Car Lower Front 38354, 314426 38354, 204508A 10
Taurus 1996-2007 Car Lower Front 554402, 554404 554401, 554403 11
Thunderbird 1989-1997 Car Lower Front 39976, 554419 39976, 554417 12
Model Year Type Position Location Removal Adapters Installation Adapters Page
Continental 1995-2002 Car Lower Front 554402, 554404 554401, 554403 11
Mark VIII 1993-1998 Car Lower Front 39976, 554419 39976, 554417 12
MKZ 2007-2012 Car Upper Front 29505, 305227, 554416 38355A, 554415 7
Town Car 1995-2002 Car Lower Front 554415, 537499, 305228 204508A, 313967 4
Town Car 2003-2011 Car Lower Front 313444 38354, 554413 5
Town Car 2003-2006 Car Upper Front 531739, 554419 305227, 554422, 554429 6
Zephyr 2006 Car Upper Front 29505, 305227, 554416 38355A, 554415 7
Model Year Type Position Location Removal Adapters Installation Adapters Page
626 1983-1997 Car Lower Front 38354, 314426 38354, 204508A 10
MX6 1988-1997 Car Lower Front 38354, 314426 38354, 204508A 10
Model Year Type Position Location Removal Adapters Installation Adapters Page
Cougar 1989-1997 Car Lower Front 39976, 554419 39976, 554417 12
Grand Marquis 1995-2002 Car Lower Front 554415, 537499, 305228 204508A, 313967 4
Grand Marquis 2003-2011 Car Lower Front 313444 38354, 554413 5
Grand Marquis 2003-2006 Car Upper Front 531739, 554419 305227, 554422, 554429 6
Marauder 2003-2004 Car Lower Front 313444 38354, 554413 5
Marauder 2003-2004 Car Upper Front 531739, 554419 305227, 554422, 554429 6
Milan 2006-2011 Car Upper Front 29505, 305227, 554416 38355A, 554415 7
Sable 1996-2005 Car Lower Front 554402, 554404 554401, 554403 11
3
Safety Precautions
CAUTION: To prevent personal injury,
• Wear protective eyewear that meets the requirements of ANSI Z87.1 and
OSHA.
• Before performing any repairs on a vehicle, block all wheels to prevent
movement.
•Checkthenalalignmentoftoolingandcomponentsbeforeusingthe
C-frame press to exert pressure.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
Notes: Provide clarity and helpful information.
U-Joint Service
The C-frame included in this kit also may be used to service
U-joints on most cars and light trucks – either on or off vehicle.
Note: This application uses the standard plug (29501) shipped
with the forcing screw, not the 314392.
Disassembly
1. Remove external / internal lock rings.
2. Position C-frame around driveshaft yoke, and tighten forcing
screw until rst bearing is removed.
3. Position C-frame on second bearing, and tighten forcing
screw until second bearing is removed.
Assembly
1. Clean dirt and oil from yoke area.
2. Align C-frame and new bearing as straight as possible
over yoke.
3. Press new bearing into yoke, and install lock rings.
4. Position C-frame and second bearing as straight as
possible over yoke.
5. Press new bearing into yoke, and install lock rings.
Ball Joint: Lower Front
Application
Ford Crown Victoria 1995-2002
Lincoln Town Car 1995-2002
Mercury Grand Marquis 1995-2002 554415
Adapter
537499
Adapter
305228
Adapter
313967
Adapter
204508A
Adapter
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Control arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
4
Ball Joint: Lower Front
Application
Ford Crown Victoria 2003-2011
Lincoln Town Car 2003-2011
Mercury Grand Marquis 2003-2011
Mercury Marauder 2003-2004
Ball
joint
Ball
joint
554413
Adapter
313444
Adapter
38354
Adapter
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Control arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
5
Ball Joint: Upper Front
Application
Ford Crown Victoria 2003-2006
Lincoln Town Car 2003-2006
Mercury Grand Marquis 2003-2006
Mercury Marauder 2003-2004
Ball
joint
554419
Adapter
531739
Adapter
305227
Adapter
554422
Adapter
554429
Adapter
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Control
arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
6
Ball Joint: Upper Front
Application
Ford Fusion 2006-2012
Lincoln MKZ 2007-2012
Lincoln Zephyr 2006
Mercury Milan 2006-2011
554415
Adapter
Ball joint
38355A
Adapter
554416
Adapter
Ball
joint
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
29505
Adapter
305227
Adapter
Control
arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
7
Ball Joint: Lower Front
Application
Ford Mustang 1994-2004
538591
Adapter
313967
Adapter
39976
Adapter
Control
arm
Ball
joint
204508A
Adapter
Ball
joint
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
8
Ball Joint: Lower Front
Application
Ford Mustang 2005-2008
313968
Adapter
29504
Adapter
38354
Adapter
554414
Adapter
305228
Adapter
Ball joint
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Control arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
9
Ball Joint: Lower Front
Application
Ford Probe 1989-1997
Mazda 626 1983-1997
Mazda MX6 1988-1997
38354
Adapter
Ball
joint
314426
Adapter
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
38354
Adapter
204508A
Adapter
Ball
joint
Control
arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
10
Ball Joint: Lower Front
Application
Ford Taurus 1996-2007
Lincoln Continental 1995-2002
Mercury Sable 1996-2005
554402
Adapter
554404
Adapter
Spindle
Ball
joint
554403
Adapter
554401
Adapter
Ball joint
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in spindle.
2. Insert new ball joint as straight as possible
into spindle.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
11
Ball Joint: Lower Front
Application
Ford Thunderbird 1989-1997
Lincoln Mark VIII 1993-1998
Mercury Cougar 1989-1997
39976
Adapter
Ball
joint
554419
Adapter
39976
Adapter
554417
Adapter
Ball joint
7248 C-frame
w/ 314392 Plug
installed in
forcing screw
Control arm
Removal
Installation
© 2017 Bosch Automotive Service Solutions Inc.
Note: Remove live center plug from C-frame
forcing screw; replace it with 314392 plug
supplied with this kit.
Removal
1. Remove dust boot.
2. Position components as shown.
3. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
4. Tighten forcing screw until ball joint
is removed.
Installation
1. Clean ball joint bore in control arm.
2. Insert new ball joint as straight as possible
into control arm.
3. Position components as shown.
4. Turn forcing screw until plug meets ball
joint or adapter. Check alignment of all
components.
5. Tighten forcing screw until ball joint is
rmly seated.
6. Install dust boot.
12
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
OTC 6529-3 contains the tools needed to replace ball joints in Ford, Mazda, and Mercury vehicles. This kit includes adapters for both upper and lower ball joints on various models, making it a versatile tool for mechanics.
The kit also comes with a C-frame press, which can be used to service U-joints on most cars and light trucks. The press can be used either on or off the vehicle, providing flexibility for mechanics.
The OTC 6529-3 is a comprehensive kit that provides mechanics with the tools they need to safely and efficiently replace ball joints and service U-joints.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
OTC 6539-3 Operating instructions
-
-
-
-
-
-
-
-
-
Other documents
-
ATD Tools ATD-8699 User manual
-
Pittsburgh Automotive 46389 User manual
-
-
-
ATD Tools ATD-8696 User manual
-
Power Fist 8354714 Owner's manual
-
Ford Ranger Maintaince And Repair Manual
-
Factory Five Racing Mk4 Roadster Assembly Manual
-
Factory Five Racing Mk3 Roadster Assembly Manual
-
