Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
Remove the ring and strainer or cover
(three screws) from the tilted fi xture.
Locate the low side of the fi xture and
place the thick side of adjustment shim
on the low side of the fi xture.
Place ring and strainer or cover over
shims and check for level. Add or
remove shims as needed until fi xture is
level with fi nish fl oor.
Note: It may be possible to adjust the height by
turning the fi xture.
Align the ring and strainer or cover with
brass inserts in the fi xture head and
re-install screws.
Use longer screw(s) as needed when
using multipe shims.
1
2
3
4
Finish Line™ Adjustment Shims
Instructions
Tilted Drain
Tilted Strainer
◄ Low Side
Multiple Shims
◄ Longer Screw
Tilted Drain
Level Strainer
Existing
Screw
►
#IS-832-S4 Finish Line Adjustment Shims Instruction Sheet 6/06
Existing
Screw
►
-
1
Sioux Chief 832-S4 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Zurn FD2-PV2 Installation guide
-
Zurn EZ1 Installation Instructions Manual
-
Dodge CST Controlled Start Transmission Owner's manual
-
Signature Hardware SHAT3321ZAMG Installation guide
-
Milnor 30022T5X Installation and Service Manual
-
-
Ransomes 898804, 898805 User manual
-
Hobart Baxter OV500G2 Installation Instructions Manual
-
Volvo Penta Aquamatic 250A Workshop Manual
-
GORMAN-RUPP PUMPS T8C71SC-B User manual
