Minolta PageWorks Pro 20 Install Manual

Trademark Acknowledgments

PageWorks is a trademark of Minolta in the U.S. and Canada.

Minolta is a registered trademark of Minolta Co., Ltd.

Apple, Macintosh and TrueType are registered trademarks of

Apple Computer Inc.

MS-DOS, Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States and/or other countries.

IBM is a registered trademark of International Business Machines

Corporation.

Adobe, PostScript and the PostScript logo are trademarks of

Adobe Systems Incorporated.

PCL is a registered trademark of Hewlett-Packard Company.

All other products or name brands are trademarks or registered

trademarks of their respective holders.

Hyou2.fm i ページ２００３年１１月１８日　火曜日　午前１０時２８分

i

Foreword

Welcome

This PostScript

®

Set-up Guide describes how to install the Post-

Script

®

DIMM, expansion memory and PostScript

®

Printer Soft-

ware for PageWorks 20. Before reading this PostScript

®

Set-up

Guide, we recommend that you read the User’s Manual for Page

-

Works 20. It explains how to set up and operate the printer.

No part of this document may be reproduced, transmitted, tran-

scribed, stored in a retrieval system, or translated into other lan-

guages without the express written prior consent from Minolta

Co., Ltd.

The contents of this manual are subject to change without notice.

Customer Support

Customer support for all Minolta PageWorks printer product is

available 24 hours a day, seven days, a week by calling 1-800-459-

3250 (from within North America). Minolta also maintains a web

site which provides printer driver downloads, Frequently Asked

Questions and handles all e-mail requests for technical assistance

at www.minoltaprinters.com.

Please be prepared to provide the following information when con-

tacting Minolta Customer Support:

• Model name

• Serial number

• A detailed description of the problem

• Any message displayed on the LCD panel

For questions or problems with instruction, please be prepared to

provide the following additional information:

• Brand name and model number of the computer

• Type of processor

• Type of operating system

• Amount of installed RAM

fwd.fm i ページ２００３年１１月１８日　火曜日　午前１０時２７分

ii

Foreword

Software License Agreement

Important:

Before installing the software please carefully read this License

Agreement. The installation of this software indicates your accep

-

tance of the terms and conditions of this License. If you do not

agree with the terms and conditions, you should return the soft

-

ware to Minolta Corporation for a full refund.

Ownership:

Your license confers no title or ownership in the Software and

should not be construed as a sale of any right in the Software.

Minolta’s third party suppliers may protect their rights in the event

of any violation of these terms. You are expressly notified that

Adobe Systems Incorporated, a California corporation located at

1585 Charleston Road, Mountain View, California 94043

(“Adobe”) is a third-party beneficiary to this License.

The License permits you to:

1. Use this software in the conduct of business with out limit when

the software is used with the intended Minolta Product.

2. SOFTWARE: You may install and use the SOFTWARE on a

computer to which the Minolta Printer is attached.

The following uses are not permitted:

1. Making of alterations to the software

2. Right to grant sub-license, leases or other rights to others

3. Merge this software product or any portion of it into another

product or program

4. You may not reverse engineer, decompile, or disassemble the

software

fwd.fm ii ページ２００３年１１月１８日　火曜日　午前１０時２７分

iii

Foreword

Export Requirements:

You may not export or re-export the software or any copy or adap-

tation in violation of any applicable laws or regulations

Notes:

By installing this software you acknowledge that you have read

this agreement, understand it and agree to be bound by its

terms and conditions. You further agree that this is the complete

and exclusive statement of the agreement between us and super

-

sedes any proposal or prior agreement either oral or written,

and any other communication between us relating to the subject

matter of this agreement. You further agree that if Minolta Cor

-

poration is required to engage in any proceeding, legal or other-

wise to enforce its rights under this agreement, Minolta

Corporation shall be entitled to recover from Licensee, in addi

-

tion to any other sums due, reasonable Attorney fees, cost and

disbursements.

For the U.S. and Canada only

fwd.fm iii ページ２００３年１１月１８日　火曜日　午前１０時２７分

iv

Foreword

Limited Software Warranty

Limited Warranty

Minolta warrants that the software will perform in accordance with

the accompanying written materials for a period of (90) ninety

days from the date of purchase. Minolta does not warrant that the

operation of the program will meet your requirements. This lim

-

ited warranty gives you specific legal rights. You may have others,

which vary from state/jurisdiction to state/jurisdiction.

Purchasers Remedies

Minolta’s entire liability and your exclusive remedy with respect to

the software shall be at Minolta’s option either, repair or replace

-

ment of the software. The software must be returned to Minolta

with a copy of your proof of purchase. The Limited Warranty is

void if failure of the software has resulted from accident, abuse, or

misapplication. Any replacement software will be warranted for

the remainder of the original warranty period or (30) thirty days,

whichever is longer.

The remedies provided herein are customer’s sole and exclusive

remedies. In no event shall Minolta Corporation be liable for

any lost profits, direct, indirect, special, incidental, or conse

-

quential damages, whether based on contract, tort, or any other

legal theory.

fwd.fm iv ページ２００３年１１月１８日　火曜日　午前１０時２７分

v

Foreword

PostScript

®

DIMM Warranty

Warranty Term

The PostScript

®

DIMM has a (1) One Year Warranty. The Post-

Script

®

DIMM must be returned to Minolta for repair or replace-

ment at Minolta’s discretion.

Warranty Coverage

Minolta Corporation warrants this product to be free from defects

in workmanship and materials for a period of one year from the

date of receipt of the unit. If the unit fails to function as written in

the User’s Guide, Minolta will repair or replace the unit at no

charge. Minolta will ship at their expense an exchange unit over

-

night to replace the defective unit.

The remedies provided herein are the customers sole and exclusive

remedies. In no event shall Minolta Corporation be liable for any

lost profits, direct or indirect, special, incidental, or consequential

damages, whether based on contract, tort, or other legal history.

About PostScript

®

features

The Adobe PostScript DIMM provides the following features:

- Support for PostScript Level 2

- 35 Type 1 Fonts

IMPORTANT

• When installing the PostScript

®

DIMM, be sure to install 8MB

of SIMM included in the PostScript

®

DIMM kit.

fwd.fm v ページ２００３年１１月１８日　火曜日　午前１０時２７分

vi

Contents

CONTENTS

HardWare Set-Up

Setting Up ............................................................... 1

Windows 95

Introduction .......................................................... 11

System Requirements ......................................... 11

Installing the Software......................................... 12

Removing the software........................................ 18

Windows 3.1

Introduction .......................................................... 19

System Requirements ......................................... 19

Installing the Software......................................... 20

Removing the software........................................ 26

Macintosh

Introduction .......................................................... 29

System Requirements ......................................... 29

Installing the Software......................................... 30

Installing Screen Fonts........................................ 40

fwd.fm vi ページ２００３年１１月１８日　火曜日　午前１０時２７分

11

Windows 95

Introduction

The Minolta PageWorks 20 PostScript Printer Software allows you

take full advantage of your printer’s features and capabilities using

your computer running Windows 95. This chapter describes how to

install this software while explaining the software’s features.

System Requirements

The following list contains the system requirements necessary for

optimal operation of the Minolta PageWorks 20 PostScript Printer

Software.

• Operating System: Microsoft Windows 95.

• Personal Computer: IBM-compatible PC with at least a 486SX

33Mz CPU, or faster CPU (Pentium processor recommended).

• I/O Interface: Standard PC parallel printer port and cable.

• Memory: At least 12MB PC RAM (16MB recommended).

• Free Hard disk Space: Approximately 2MB for files.

• Disk Drive: 3.5-inch drive with 1.4MB capacity is required for

installation only.

• Display: VGA (640 x 480-dot) or higher resolution.

NOTE

• Use of a poor quality parallel cable may adversely affect the

input.

12

Windows 95

Installing the Software

NOTE

1. Turn on the printer.

2. Turn on your computer and start up Windows 95.

3. Insert the diskette labeled PageWorks 20 PostScript



Printer

Software for Windows



95 2/2 into one of your computer's

disk drives. For this example, we will assume that the diskette is

located in drive A:\.

4. Click the Start button, click Settings, and then click Printers.

5. Double-click the Add Printer icon.

• Make sure that the printer is connected to your computer with

the recommended parallel cable.

13

Windows 95

6. Click the Next > button to display the next dialog.

7. Select Local printer if the printer is connected directly to your

computer or

Network printer if the printer is connected through

a network.

NOTE

8. Click the Next > button to display the next dialog.

• If your printer is connected to a Network, we recommend

consulting your network administrator and referring to the

Network Interface Card Manuals.

14

Windows 95

9. Click Have Disk….

10. Select the drive where PageWorks 20 PostScript



Printer

Software

for Windows



95 2/2 is located (A:\ in this example)

and then click the

OK button.

15

Windows 95

11. Select Minolta PageWorks 20 -PS and then click the Next >

button.

12. Select an appropriate port and then click the Next > button.

16

Windows 95

13. Select Yes to use the printer as the default printer or No if you

do not want to use it as the default printer.

14. If you wish, rename the printer and then click the Next > button.

To proceed without renaming the printer, click the

Next > but-

ton without changing the name.

15. Select Yes (recommended) to print a test page or No if you

want to proceed without printing a test page.

16. Click the Finish button and the installer will start copying the files.

17

Windows 95

17. While copying the files, the window that asks you to insert the

disk labeled

Windows 95 appears. Then, insert the appropriate

floppy diskette or CD-ROM into the drive and click the

OK but-

ton.

The icon of the installed printer will appear inside the Printers

folder after installation is complete.

18

Windows 95

Removing the Software

NOTE

1. Turn on your computer and start up Windows 95.

2. Click the Start button, click Settings, and then click Printers.

3. Click Minolta PageWorks 20 -PS.

4. Click File and then Delete.

5. Click Yes to remove the printer software.

6. Click Yes to delete all files related to the Minolta PageWorks 20

PostScript Printer Software.

• Before removing the Minolta PageWorks 20 -PS printer

software, be sure to close all application software you are using.

19

Windows 3.1

Introduction

The Minolta PageWorks 20 PostScript Printer Software was

provided by Adobe Systems Incorporated, and allows you take full

advantage of your printer's features and capabilities using your

computer running Windows 3.1. This chapter describes how to

install this printer driver while explaining the driver’s features.

System Requirements

The following list contains the system requirements necessary for

optimal operation of the Minolta PageWorks 20 PostScript Printer

Software.

• Operating System: Microsoft Windows 3.1 or later.

• Personal Computer: IBM-compatible PC with at least a 386DX

16Mz CPU, or faster CPU (Pentium processor recommended).

• I/O Interface: Standard PC parallel printer port and cable.

• Memory: At least 4MB PC RAM (8MB recommended).

• Free Hard disk Space: Approximately 2MB for files.

• Disk Drive: 3.5-inch drive with 1.4MB capacity is required for

installation only

• Display: VGA (640 x 480-dot) or higher resolution.

NOTE

• Use of a poor quality parallel cable may adversely affect the

input.

win31.fm 19 ページ２００３年１１月１８日　火曜日　午前１０時２９分

20

Windows 3.1

Installing the Software

NOTE

1. Turn on the printer.

2. Turn on your computer and start up Windows 3.1.

3. Insert the diskette labeled PageWorks 20 PostScript



Printer

Software for Windows



3.1 into one of your computer's disk

drives. For this example, we will assume that the diskette is

located in drive A:\.

4. From the Program Manager, double-click Main to display the

Main group, and then double-click

File Manager.

• Make sure that the printer is connected to your computer with

the recommended parallel cable.

win31.fm 20 ページ２００３年１１月１８日　火曜日　午前１０時２９分

21

Windows 3.1

5. Open the drive A:\ window, then double-click the Setup.exe

icon to start up the installer.

6. Click the Read button to open the ReadMe file for Adobe PS3

for Windows 3.1, then read the document.

win31.fm 21 ページ２００３年１１月１８日　火曜日　午前１０時２９分

22

Windows 3.1

7. Select Exit from the File menu on the ReadMe screen to return

to the PostScript Printer Driver Setup dialog box.

8. Click the Continue button to start installing the printer driver.

win31.fm 22 ページ２００３年１１月１８日　火曜日　午前１０時２９分

Page is loading ...

Minolta PageWorks Pro 20 Install Manual

This manual is also suitable for

Minolta PageWorks Pro 20 Install Manual

Related papers

Other documents