Samsung SP-56L3HX User manual

DLP TV

SP46L3HX

SP50L3HX

SP56L3HX

SP61L3HX

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

PICTURE IN PICTURE (PIP)

C

OLOR WEAKNESS ENHANCEMENT MODE

MY COLOR CONTROL

SRS TruSurroundXT

D

IGITAL NATURAL IMAGE ENGINE

This device is a Class B digital apparatus.

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 1

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 2

English - 3

Contents

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ Control Panel of Your Television ................................................................... 5

■ Connection Panel of Your Television ............................................................ 6

■ Connecting to an Aerial or Cable Television Network ................................... 8

■ Connecting a Satellite Receiver or Decoder.................................................. 8

■ Infrared Remote Control ................................................................................ 9

■ Inserting the Batteries in the Remote Control................................................ 10

■ Switching Your Television On and Off........................................................... 11

■ Placing Your Television in Standby Mode..................................................... 11

■ Becoming Familiar with the Remote Control ................................................. 12

■ Plug & Play Feature....................................................................................... 13

■ Choosing Your Language.............................................................................. 14

◆ USING YOUR TELEVISION

■ Storing Channels Automatically..................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Sorting the Stored Channels ......................................................................... 19

■ Activating the Child Lock ............................................................................... 20

■ Assigning Names to Channels ...................................................................... 21

■ Fine Tuning Channel Reception.................................................................... 22

■ Using the LNA (Low Noise Amplifier) Feature............................................... 23

■ Viewing the Channel Scan Picture ................................................................ 23

■ Displaying Information ................................................................................... 24

■ Freezing the Current Picture ......................................................................... 24

■ Changing the Picture Standard ..................................................................... 25

■ Adjusting the Picture Settings........................................................................ 26

■ Selecting the Picture Size.............................................................................. 27

■ Using the Digital NR (Noise Reduction) Feature ........................................... 28

■ DNIe

TM

(Digital Natural Image engine) ............................................... 28

■ Setting the My Color Control (Easy Control) ................................................. 29

■ Setting the My Color Control (Detail Control) ................................................ 30

☛

➢

Press Important Note

Symbols

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 3

English - 4

Contents (continued)

◆ USING YOUR TELEVISION (continued)

■ Setting the Film Mode.................................................................................... 31

■ Viewing the Picture In Picture (PIP) .............................................................. 32

■ Changing the Sound Standard ...................................................................... 34

■ Adjusting the Sound Settings ........................................................................ 35

■ Setting the SRS TSXT................................................................................... 35

■ Adjusting the Volume Automatically .............................................................. 36

■ Enjoying the Sound of External Speakers..................................................... 37

■ Selecting the Sound Mode (depending on the model) .................................. 38

■ Setting and Displaying the Current Time....................................................... 39

■ Setting the Sleep Timer ................................................................................. 40

■ Switching the Television On and Off Automatically ....................................... 41

■ Setting the Blue Screen................................................................................. 42

■ Setting the Melody Sound ............................................................................. 42

■ Using the Color Weakness Enhancement Feature ....................................... 43

■ Setting the Picture in PC Mode ..................................................................... 44

■ Viewing an External Signal Source ............................................................... 45

■ Assigning Names to External Sources .......................................................... 46

◆ USING THE TELETEXT FEATURE

■ Teletext Feature ............................................................................................ 47

■ Displaying the Teletext Information ............................................................... 48

■ Selecting Display Options.............................................................................. 48

■ Selecting a Teletext Page.............................................................................. 49

◆ ADDITIONAL INFORMATION AND CONNECTIONS

■ Connecting to the External Input/Output ....................................................... 50

■ Connecting to the S-Video Input.................................................................... 51

■ Connecting to the Digital Input ...................................................................... 52

■ Connecting to the Component Input.............................................................. 53

■ Connecting to the PC Input ........................................................................... 53

■ Setting up Your PC Software (Windows only) ............................................... 54

■ PC/HDMI(DVI) Input Mode ............................................................................ 55

◆ RECOMMENDATIONS FOR USE

■ Setting Up Your Remote Control ................................................................... 56

■ Programming the Remote Control for Other Components ............................ 57

■ Replacing the Lamp....................................................................................... 59

■ Troubleshooting: Before Contacting Service Personnel................................ 60

■ Technical Specifications ................................................................................ 61

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 4

English - 5

Control Panel of Your Television

LED Indicators

➢

The actual configuration on your TV may be different, depending on

your model.

Switch the TV On and Off

Picture On/Off

Remote Control Sensor

Switch among video input modes

Display the on-screen menu

Adjust the volume

Select the channels

Access to the selected option on

the menu system

( :On, :Blinking, :Off)

TIMER LAMP STAND BY/TEMP Indication

Standby mode.

A timer pilot lights when Timer Auto On or Off is selected.

Normal operation.

Normal operation (when Timer Auto On or Off is selected).

Lamp is warming up. The normal picture comes on after 25 seconds.

The normal picture comes on after 25 seconds. (when Timer Auto On or

Off is selected)

Air vent cover in the rear of the TV is not properly installed.

Inside temperature of the TV is over normal. Clean the air vent cover in the

rear of the TV. Turn the TV back on after 1 hour.

The lamp does not work, please contact an authorized Service Center for

assistance.

➢

◆

You can use the channel selection buttons to switch on the TV when it is in standby mode

depending on the model.

◆

When using the on-screen menu the volume adjustment and channel selection buttons have

the same function as the

…/†/œ/√ buttons on the remote control.

◆

If the remote control no longer works or your have lost it, you can use controls on the panel

of the TV.

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 5

English - 6

Connection Panel of Your Television

➢

The actual configuration on your TV may be different, depending on

your model.

Video Input

Audio Input

S-Video Input

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 6

English - 7

Connection Panel of Your Television (continued)

➢

The actual configuration on your TV may be different, depending on

your model.

Rear of the TV

Œ ANT IN

Coaxial connector for aerial or cable

network.

´ S-Video Input

Connect to S-Video output jacks of an

S-VHS VCR or DVD player.

ˇ Audio/Video Input

Connect to the audio/video output jacks of

VCRs, DVD players and similar devices.

¨ Audio/Video Output

Connect to the audio/video input jacks of a

recording VCR.

ˆ COMPONENT Input

Connect to the audio and video outputs of

DVD or DTV Set-Top Box.

480i/480p/576i/576p/720p/1080i Y, P

B and

P

R video signal outputs are available.

Ø PC Input

Connect to the PC audio/video outputs.

∏ DVI Audio Input

Connect to the audio output jacks for device

with DVI output.

” HDMI/DVI Input

Connect to the digital device with HDMI or

DVI output.

’ SERVICE Jack

It is for repairs and software upgrades.

˝ SCART Input/Output

Inputs or outputs for external devices, such

as VCR, DVD, video game device or video

disc players.

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 7

English - 8

To view television channels correctly, a signal must be received by

the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the ANT IN jack on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp

and clear.

For further details, refer to:

◆ “Storing Channels Automatically” on page 15.

◆ “Storing Channels Manually” on page 16.

Connecting to an Aerial or Cable Television Network

Rear of the TV

Cable Television

Network

or

Connecting a Satellite Receiver or Decoder

In order to watch television programmes broadcast via

a satellite network, you must connect a satellite receiver

to the rear of TV. Also, in order to descramble a coded

transmission signal, you must connect a decoder

to the rear of TV.

◆ Using a RCA cable

Connect the receiver (or decoder) RCA cable to one of the

RCA connectors on the rear of the television.

◆ Using a coaxial cable

Connect a coaxial cable to the:

-

Receiver (or Decoder) output socket.

-

Television aerial input socket.

➢ If you wish to connect both a satellite receiver (or decoder)

and a VCR, you should connect the:

◆ Receiver (or Decoder) to the VCR

◆ VCR to the television

Otherwise, connect the receiver (or decoder) directly to

the television.

Rear of the TV

Satellite Receiver/

Decoder

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 8

English - 9

Infrared Remote Control

➢

The performance of the remote control may be affected by bright light.

POWER ON/OFF

DIRECT CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

MENU DISPLAY/

TELETEXT INDEX

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

STILL THE MAIN PICTURE

➢

In the PIP mode, the main and

sub pictures are stilled

at the same time.

PICTURE EFFECT SELECTION

EXTERNAL INPUT SELECTION/

TELETEXT HOLD

SWITCH REPEATEDLY BETWEEN THE

LAST TWO CHANNELS DISPLAYED

PICTURE SIZE

EXIT FROM ANY DISPLAY

PREVIOUS CHANNEL/

TELETEXT PREVIOUS PAGE

CONFIRM YOUR CHOICE

(STORE OR ENTER)

DISPLAY INFORMATION/

TELETEXT REVEAL

SRS TruSurround XT MODE SELECTION

ONE OR TWO-DIGIT CHANNEL

SELECTION

TUNER/CABLE NETWORK

SELECTION

SOUND EFFECT SELECTION

MAKE THE REMOTE CONTROL WORKS

FOR TV, VCR, CABLE-BOX (CATV),

DVD PLAYER, OR SET-TOP BOX (STB)

SOUND MODE SELECTION

VOLUME DECREASE

NEXT CHANNEL/

TELETEXT NEXT PAGE

CURRENT TIME DISPLAY/

TELETEXT SUBPAGE

TELETEXT DISPLAY/

MIX BOTH TELETEXT INFORMATION

AND THE NORMAL BROADCAST

DNIe ON/DEMO/OFF/

TELETEXT SIZE SELECTION

AUTOMATIC SWITCH-OFF/

TELETEXT CANCEL

SET THE MBR CODE OF REMOTE

CONTROL FOR THE PRODUCTS

EXCEPT SAMSUNG PRODUCT

(OPTION)

IF YOUR REMOTE CONTROL IS

NOT FUNCTIONING PROPERLY,

TAKE OUT THE BATTERIES AND

PRESS THE RESET BUTTON FOR

ABOUT 2~3 SECONDS. RE-

INSERT THE BATTERIES AND

TRY USING THE REMOTE

CONTROL AGAIN.

FASTEXT TOPIC SELECTION

WHEN YOU PRESS A BUTTON , ‘

’

APPEARS ALONG WITH SELECTED MODE

(TV, VCR, CATV, DVD OR STB) AND

REMAINING BATTERIES ON LCD

PIP FUNCTIONS;

- PIP ACTIVATING OR DEACTIVATING

(PIP ON)

- SWAPPING THE MAIN AND THE SUB

PICTURE (SWAP)

- SELECTING THE CHANNEL OF SUB

PICTURE (P

^

/

∨

)

VCR/DVD FUNCTIONS;

- REWIND (REW)

- STOP

- PLAY/PAUSE

- FAST FORWARD (FF)

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 9

English - 10

You must insert or replace the batteries in the remote control when

you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol ( ) downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆

-

on the battery against

-

on the remote control

◆

+

on the battery against

+

on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

Do not mix battery types, i.e. alkaline and manganese.

Inserting the Batteries in the Remote Control

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 10

English - 11

Your television can be placed in Standby mode, in order to reduce

the power consumption.

The Standby mode can be useful when you wish to interrupt

viewing temporarily (during a meal, for example).

1 Press the POWER () button on the remote control to turn the

screen off.

Result

: The

STAND BY/TEMP indicator on the front of the

television lights.

2 To turn the screen back on, simply press the POWER () button

again.

➢

You can also switch on by pressing the P /, TV or numeric

button.

☛

Do not leave your television in Standby mode for long

periods of time (when you are away on holiday, for

example). Turn your television off by pressing the power

switch on the back of the set. It is best to unplug the set

from the mains and aerial.

Placing Your Television in Standby Mode

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television

and the frequency is 50 or 60Hz.

2 Press the power switch on the side of the television toward “ON”

(

I).

3 Press the POWER () button on the remote control (or the “ ”

button on the front of the television).

Result

: The programme that you were watching last is re-

selected automatically.

➢

If you have not yet stored any channels, No clear picture

appears. Refer to “Storing Channels Automatically” on page

15 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the power switch toward “OFF”

(

O).

Switching Your Television On and Off

TV

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 11

English - 12

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Display the on-screen menu system

The following table presents the most frequently used buttons and

their functions.

Button Viewing Function Menu Function

Used to display the next

-

stored channel.

Used to display the

-

previous stored channel.

to Used to display the corresponding channels.

➢

For double digit channels, the second digit must be

pushed immediately after the first. Failure to do this will

result in a single digit channel being displayed.

-

/

--

Used to select a channel numbered ten or over.

Press this button, and the “

--

” symbol is displayed.

Enter the two-digit channel number.

Used to switch repeatedly between the last two channels

displayed.

To quickly switch between two channels that are far apart,

tune to one channel, then use the numeric buttons to select

second channel. Then, use the

PRE-CH button to quickly

alternate between them.

Used to increase the

-

volume.

Used to decrease the

-

volume.

Used to switch the sound off temporarily.

➢

To turn the sound back on, press this button again, or

press the or button.

Used to display the Used to return to the previous

on-screen menu system. menu or normal viewing.

-

Used to:

◆ Display a submenu

containing selections for

the current menu option

◆ Increase/decrease a

menu option value

-

Used to confirm your choice.

-

Used to exit from the menu

system and return to normal

viewing directly.

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 12

English - 13

When the television is initially powered ON, several basic customer

settings proceed automatically and subsequently. The following

settings are available.

1 If the television is in Standby mode, press the POWER () button

on the remote control.

2 To start the Plug & Play, select the Start and press the ENTER

button.

Result

: The available languages are listed.

3 Select the appropriate language by pressing the … or † button.

Press the

ENTER button to confirm your choice.

Result

: The message Check antenna input is displayed.

4 Make sure that the antenna is connected to the TV, and then

press the

ENTER button.

Result

: The available areas are listed.

5 Select the appropriate area by pressing the … or † button.

Press the

ENTER button to confirm your choice.

Result

: The Auto Store menu is displayed.

6 Press the ENTER button to start the search

Result

: The search will end automatically. Channels are sorted

and stored in an order which reflects their position in

the frequency range (with lowest first and highest last).

➢ To stop the search before it has finished or return to normal

viewing, press the

EXIT or ENTER button.

7 When the channels have been stored, the Clock Set menu is

displayed. Press the

ENTER button to set the current time.

Press the

œ or √ button to move to the hour or minute.

Set these by pressing the

▲ or ▼ button.

Press the

ENTER button to confirm your choice.

8 When it has finished, the message Enjoy your watching is

displayed, and then the channel which has been stored will be

activated.

Plug & Play Feature

Plug & Play

Start

Start Plug & Play

Language

English

Türkçe

Français

Language

Plug & Play

Move

Enter Skip

Area

Asia/W.Europe

CIS/E.Europe

China

Hongkong/UK

Australia

NZ/Indonesia

South Africa

America

Plug & Play

Move

Enter Skip

Enter Return

Plug & Play

OK

Check antenna input.

Enter Skip

Plug & Play

Start

Auto Store

Enter Skip

Plug & Play

Stop

Auto Store

175 MHz

18%

Enter Skip

Plug & Play

Clock Set : - - : - - am

Enter Skip

Enjoy your watching.

OK

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 13

English - 14

Setup

Move Enter Return

Plug & Play

Language : English

Time

Blue Screen : Off

Melody : Off

Color Weakness : Off

PC

TV

If you want to reset this feature...

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are displayed.

3 Press the ENTER button.

Result

: The Plug & Play is selected.

4 Press the ENTER button again.

5 To start the Plug & Play, select the Start and press the ENTER

button.

6 For further details on how to set, refer to the previous page.

When you start using your television for the first time, you must

select the language which will be used for displaying menus and

indications.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Language.

Press the

ENTER button.

Result

: The available languages are listed.

5 Select the appropriate language by pressing the ▲ or ▼ button.

6 Press the ENTER button to confirm your choice.

Plug & Play Feature (continued)

Choosing Your Language

Setup

Move Enter Return

Plug & Play

√√

Language : English

√√

Time

√√

Blue Screen : Off

√√

Melody : On

√√

Color Weakness : Off

√√

PC

√√

TV

Setup

Move Enter Return

Plug & Play

√√

Language : English

√√

Time

√√

Blue Screen : Off

√√

Melody : On

√√

Color Weakness : Off

√√

PC

√√

TV

English

Türkçe

Français

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 14

English - 15

You can scan for the frequency ranges available to you (and

availability depends on your country). Automatically allocated

programme numbers may not correspond to actual or desired

programme numbers. However you can sort numbers manually and

clear any channels you do not wish to watch.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

Result

: The Auto Store is selected.

4 Press the ENTER button again.

Result

: The Area is selected.

5 Press the ENTER button once again.

Result

: The available areas are listed.

6 Select the appropriate area by pressing the ▲ or ▼ button.

Press the

ENTER button to confirm your choice

7 Press the ▲ or ▼ button to select Search.

Press the

ENTER button.

8 To start the search, select the Start and press the ENTER

button.

Result

: The search will end automatically. Channels are sorted

and stored in an order which reflects their position in

the frequency range (with lowest first and highest last).

The programme originally selected is then displayed.

➢ To stop the search before it has finished or return to normal

viewing, press the

EXIT or ENTER button.

9 When searching and storing are complete, the Sort menu is

displayed.

◆

To sort the stored channels into the desired numerical order,

go to Step

5 of the “Sorting the Stored Channels” procedure

on page 19.

◆

To exit from the channel store function without sorting the

channels, press the

MENU button repeatedly until the menus

disappear.

10 When the channels have been stored, you can:

◆ Sort them in the order required (see page 19)

◆ Clear a channel (see page 18)

◆ Assign a name to the stored channels (see page 21)

◆ Fine-tune channel reception if necessary (see page 22)

◆ Activate/deactivate the LNA (Low Noise Amplifier) feature

(see page 23)

◆ Activate/deactivate the Digital NR (Noise Reduction)

feature (see page 28)

Storing Channels Automatically

Channel

Auto Store

√√

Manual Store

√√

Add/Delete

√√

Sort

√√

Child Lock

√√

Name

√√

Fine Tune

√√

††

More

TV

Auto Store

Area : Asia/W.Europe

Search

√√

TV

Asia/W.Europe

CIS/E.Europe

China

Hongkong/UK

Australia

NZ/Indonesia

South Africa

America

Auto Store

Area : Asia/W.Europe

√√

Search

√√

TV

Move Enter Return

Search

Start

Press ENTER to start.

Enter Return

Search

Stop

Auto Store in progress.

175 MHz

18%

Enter Return

Sort

TV

1

-----

*

2

-----

*

3

-----

*

4

-----

*

5

-----

*

Prog. Ch.

Move Enter Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 15

English - 16

You can store the television channels, including those received via

cable networks.

When storing channels manually, you can choose:

◆ Whether or not to store each of the channels found

◆ The programme number of each stored channel which

you wish to identify

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Manual Store.

Press the

ENTER button.

Result

: The option available in the Manual Store group are

displayed with

Prog. is selected.

5 To assign a programme number to a channel, find the correct

number by pressing the

… or † button.

6 If necessary, select the broadcasting standard required. Press the

œ or √ button to select Color System and press the … or †

button. The color standards are displayed in the following order.

(depending on the model).

◆ AUTO

-

PAL

-

SECAM

◆ AUTO

-

NTSC3.58

-

NTSC4.43

-

PAL60

7 Press the œ or √ button to select Sound System and press the …

or † button. The sound standards are displayed in the following

order. (depending on the model).

BG

-

DK

-

I

-

M

Storing Channels Manually

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C

--

887MHz ?

œœ √√

Move Adjust

Return

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C

--

887MHz ?

œœ √√

Move Adjust

Return

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C

--

887MHz ?

œœ √√

Move Adjust

Return

Channel

Auto Store

√√

Manual Store

√√

Add/Delete

√√

Sort

√√

Child Lock

√√

Name

√√

Fine Tune

√√

††

More

TV

Move Enter Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 16

English - 17

8 If you know the number of the channel to be stored, see the

following steps.

◆

Press the œ or √ button to select Channel.

◆

Press the ▲ or ▼ button to select C (Air channel) or S (Cable

channel).

◆

Press the √ button.

◆

Press the numeric buttons (0~9), … or † button to select

indicate the required number.

➢ If there is no sound or abnormal sound, reselect the sound

standard required.

9 If you do not know the channel numbers, select the Search by

pressing the

œ or √ button. Press the … or † button to start the

search.

Result

: The tuner scans the frequency range until the first

channel or the channel that you selected is received

on your screen.

10 To store the channel and associated programme number, select

the

Store by pressing the œ or √ button. Press the ENTER

button.

Result

: The OK is displayed.

11 Repeat Steps 8 to 10 for each channel to be stored.

☛

Channel mode

◆ P (Programme mode):

When completing tuning, the

broadcasting stations in your area have been assigned to

position numbers from P00 to P99. You can select a channel

by entering the position number in this mode.

◆ C (Real channel mode):

You can select a channel by

entering the assigned number to each air broadcasting station

in this mode.

◆ S (Cable channel mode):

You can select a channel by

entering the assigned number for each cable channel in this

mode.

Storing Channels Manually (continued)

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C

--

887MHz ?

œœ √√

Move Adjust

Return

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C02 887MHz ?

œœ √√

Move Adjust

Return

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C02887MHz OK

œœ √√

Move

Enter

Return

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C

--

887MHz ?

œœ √√

Move Adjust

Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 17

English - 18

You can exclude the channels of your choice from the channel scan

operation. When you scan through the stored channels, those that

you have chosen to skip are thus not displayed. All channels that

you do not specifically choose to skip are displayed during

scanning.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Add/Delete.

Press the

ENTER button.

Result

: The Add/Delete menu is displayed with the current

channel automatically is selected.

5 Press the ▲ or ▼ button to select the channel to be added or

deleted. Press the

ENTER button.

6 To add or delete the channel, select Added or Deleted by

pressing the

▲ or ▼ button.

7 Press the ENTER button to confirm.

Skipping Unwanted Channels

Add/Delete

TV

1

-----

*

Deleted

2

-----

*

Deleted

3

-----

*

Deleted

4

-----

*

Deleted

5

-----

*

Deleted

Prog. Ch.

Move Enter Return

Channel

Auto Store

√√

Manual Store

√√

Add/Delete

√√

Sort

√√

Child Lock

√√

Name

√√

Fine Tune

√√

††

More

TV

Move Enter Return

Add/Delete

TV

1

-----

*

Deleted

2

-----

*

Deleted

3

-----

*

Added

4

-----

*

Deleted

5

-----

*

Deleted

Prog. Ch.

Adjust Enter Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 18

English - 19

This operation allows you to change the programme numbers of

stored channels. This operation may be necessary after using the

auto store. You can delete those channels you do not want to keep.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Sort. Press the ENTER button.

Result

: The Sort menu is displayed.

5 Select the channel that you wish to move by pressing the ▲ or ▼

button. Press the ENTER button.

6 Select the number of the programme to which the channel is to be

moved by pressing the

▲ or ▼ button. Press the ENTER button.

Result

: The channel is moved to its new position and all other

channels are shifted accordingly.

7 Repeat Steps 5 to 6 until you have moved all the channels to the

required programme numbers.

Sorting the Stored Channels

Sort

TV

1

-----

*

2

-----

*

3

-----

*

4

-----

*

5

-----

*

Prog. Ch.

Sort

TV

1

-----

*

-----

*

2

-----

*

3

-----

*

4

-----

*

5

-----

*

Prog. Ch.

Move Enter Return

Channel

Auto Store

√√

Manual Store

√√

Add/Delete

√√

Sort

√√

Child Lock

√√

Name

√√

Fine Tune

√√

††

More

TV

Move Enter Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 19

English - 20

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out

video and audio. Child Lock cannot be released using front panel

buttons. Only remote control can release the Child Lock setting, so

keep the remote control away from children.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Child Lock.

Press the

ENTER button.

Result

: The Child Lock menu is displayed with the current

channel automatically is selected.

Blue Screen is displayed when the

Child Lock is

activated.

5 Press the … or † button to select the channel to be locked.

6 Press the ENTER button. To lock the channel, select Locked by

pressing the

… or † button (to unlock the channel, select

Unlocked).

7 Press the ENTER button to confirm.

Activating the Child Lock

Channel

Auto Store

√√

Manual Store

√√

Add/Delete

√√

Sort

√√

Child Lock

√√

Name

√√

Fine Tune

√√

††

More

TV

Move Enter Return

Child Lock

TV

1

-----

*

Unlocked

2

-----

*

Unlocked

3

-----

*

Unlocked

4

-----

*

Unlocked

5

-----

*

Unlocked

Prog. Ch. Lock

Child Lock

TV

1

-----

*

Unlocked

2

-----

*

Unlocked

3

-----

*

Locked

4

-----

*

Unlocked

5

-----

*

Unlocked

Prog. Ch. Lock

Move Enter Return

Adjust Enter Return

1_BP68-00406A-01Eng 10/13/04 4:22 PM Page 20

Page is loading ...

Samsung SP-56L3HX User manual

Samsung SP-56L3HX User manual

Related papers

Other documents