Audio Solutions AS-P-601 User manual

Category
Surge protectors
Type
User manual

Audio Solutions AS-P-601 is a home theater power solution that provides clean AC power to sensitive home theater electrical equipment, including digital, analog, and high current devices. It features three kinds of filter circuitry to isolate and protect different types of equipment, an LCD display to show voltage and amperage levels, and eight total outlets (four always on and four switched) with surge protection and noise filtering.

Audio Solutions AS-P-601 is a home theater power solution that provides clean AC power to sensitive home theater electrical equipment, including digital, analog, and high current devices. It features three kinds of filter circuitry to isolate and protect different types of equipment, an LCD display to show voltage and amperage levels, and eight total outlets (four always on and four switched) with surge protection and noise filtering.

POWER SOLUTION 1000
Home Theater Power Center
User Guide
Model AS-P-601
© Copyright 2011 Metra Electronics
The informa on contained herein is subject to change without no ce.
This document contains proprietary informa on protected by copyright law.
No part of this document may be photocopied or reproduced without prior
wri en consent.
audiosolu ons.com
TABLE OF CONTENTS INTRODUCTION
Thank you for purchasing the Power Soluon 1000. Your new home theater power
soluon provides clean AC power to sensive home theater electrical equipment.
Four always on plus four switched outlets (eight total) provide premium digital and
analog output with surge protecon and noise ltering. Addional connecons supply
telephone/data line condioning protecon along with three pairs of DSS/coaxial
connecons for cable protecon.
Features
Three kinds of lter circuitry isolates and protects digital, analog and high current
equipment.
LCD display shows voltage and amperage levels.
System provides overload protecon with a 120V/15A electrical rang.
Remote 110V and 12V DC trigger allows remote turn on/o of switched outlets.
Telephone/data line and DSS/coax surge protecon provided.
A total of eight outlets includes 4 switched and 4 always on.
Safety Information
To reduce the risk of electrical shock, unplug the Power Soluon and allow it to
cool before cleaning.
There are no replaceable parts in the Power Soluon 1000. Do not aempt to
disassemble this unit for any reason.
Use in an indoor, dry locaon only.
Package Contents
Home Theater Power Soluon
This User Manual
POWER SOLUTION 1000 Page 2Page 1 POWER SOLUTION 1000
Introducon .................................................................................................... 2
Features .............................................................................................................. 2
Safety Informaon .............................................................................................. 2
Package Contents ................................................................................................ 2
Installaon ...................................................................................................... 3
Descripons .................................................................................................... 3
Operaon ........................................................................................................ 4
LCD Control Panel ............................................................................................... 4
LED Indicators ..................................................................................................... 4
Remote Trigger Operaon................................................................................... 4
Specicaons .................................................................................................. 4
INSTALLATION
Page 3 POWER SOLUTION 1000 POWER SOLUTION 1000 Page 4
DESCRIPTIONS
1. On/O Power Push Buon – Turn power to the switched outlets on/o.
2. LCD Display – Monitor the Power Soluon’s main funcons.
3. LED Power Indicators – Monitor ground, protecon and switched power statuses.
4. Bank 1 Digital Filter – Connect digital components to reduce line noise and
interference.
5. Bank 2 Analog Filter – Connect analog components to reduce line noise and
interference.
6. Bank 3 High Current Filter – Connect audio components to reduce line noise and
interference.
7. Always On Indicator – Use the green indicators to determine when the switched
outlets are turned “on.
8. DC IN – Control the Power Soluon using the remote trigger funcon of another
power management unit.
9. Telephone Line Input/Output – Protect your internal modem, TEL/FAX, or DSL
lines from power surges and spikes. Connect your modem, telephone line or fax
lines to these standard RJ11 phone jacks. The Power Soluon includes one IN
port and one OUT port.
10. DSS/Coax Line Input/Output – Protect coaxial cable lines from power surges and
spikes that can disturb and damage your equipment. Connect your cable TV,
satellite TV, antenna, HDTV, broadband or other coaxial cable lines.
11. 15-Amp Overload Resetable Circuit Breaker – Provides overload protecon with a
manually recoverable funcon.
1
3
2
Figure 2 - Front View Controls and Indicators
7
4
5
6
9
11
8
10
Figure 3 - Rear View Controls
POWER SOLUTION 1000 Page 6Page 5 POWER SOLUTION 1000
OPERATION
LCD Panel
The Power Soluon 1000 is equipped with an LCD Panel (Figure 4) that allows the user
to monitor input voltage and output current.
20
5
.
0
VOLTS CURRENT
Figure 4 - LCD Panel
VOLT” indicates the input voltage from the AC wall outlet.
AMPS” indicates the output current from the outlet banks.
LED Indicators
The LED indicators on the front panel (Figure 5) allow you to monitor important
power and safety informaon.
GROUNDED
PROTECTED SWITCHED
POWER
Figure 5 - Front Panel LED Indicators
“GROUNDED” indicates the status of the AC outlet. Green indicates that the AC
wall outlet is properly grounded.
“PROTECTED” indicates the status of the Power Soluon surge protecon. Orange
indicates that the surge protecon is turned on.
“SWITCHED POWER” indicates whether the “Switched” outlets are ON or OFF.
Remote Trigger Operation
This power soluon can be controlled remotely by another power soluon equipped
with a remote trigger out feature. To use remote trigger control, connect the remote
DC cable from the “DC OUT” connecon on the power soluon equipped with remote
trigger out to the “DC IN” connecon (Figure 6) on the Power Soluon 1000.
Figure 6 - DC IN Connecon
SPECIFICATIONS
Width 482.6mm
Height 44mm
Length 220.1mm
Weight 3.5kgs
Power Cord 14 AWG with 36 degree angle
(8 Feet)
Electrical Rang 120V/15A
Clamping Voltage L-N 400V, L-G 500V, N-G 500V
Surge Energy Joule Rang 2160J
Maximum Peak Spike Current 144000A
Maximum Spike Voltage 6KV
EMI/RFI Noise Filter X2 Capacitor (uF) 1.0uF*1; 0.22uF*1
Coil (T) 1mH*1
Frequency (KHz) 150KHz~100MHz
Aenuaon (dB) up to 65dB
DC Trigger Input Jack ψ 3.5
Voltage 3~30V
Current Requirement 10mA
Tel/Fax/Modem Energy (Joules) 160J
Let Through Voltage (V) <40V
DSS/COAX Cable
Protecon
Surge Arrestor Gas Tube
Breakdown Voltage <75V
Inseron Loss @10MHz <0.1dB
RF Connectors 3 Pairs, Gold nish
NOTE: Specicaons subject to change without noce.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Audio Solutions AS-P-601 User manual

Category
Surge protectors
Type
User manual

Audio Solutions AS-P-601 is a home theater power solution that provides clean AC power to sensitive home theater electrical equipment, including digital, analog, and high current devices. It features three kinds of filter circuitry to isolate and protect different types of equipment, an LCD display to show voltage and amperage levels, and eight total outlets (four always on and four switched) with surge protection and noise filtering.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI