Wacom DTF-521 User manual

DTF-521

interactive pen display

Installation Guide & User’s Manual

Installations- und Benutzerhandbuch

Guide d'installation et Manuel d'utilisation

DTF521.book Page -1 Friday, November 16, 2007 3:26 PM

Wacom DTF-521 interactive pen display

Installation Guide & User’s Manual

English version 2.

1 July 23, 2009

Cop

yr

ight © Wacom Co., Ltd., 2009

the right to revise this publication without obligation to provide notiﬁcation of such changes. Wacom does its best to

provide current and accurate information in this manual. However, Wacom reserves the right to change any

speciﬁcations and product conﬁgurations at its discretion, without prior notice and without obligation to include such

changes in this manual.

DuoSwitch is a trademark, and Wacom is a registered trademark of Wacom Co., Ltd.

Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered

in the U.S. and other countries.

Any additional company and product names mentioned in this documentation may be trademarked and/or registered as

trademarks. Mention of third-party products is for informational purposes only and constitutes neither an endorsement

nor a recommendation. Wacom assumes no responsibility with regard to the performance or use of these products.

DTF-521 Interactive Pen Display de Wacom

Guide d'installation et Manuel d'utilisation

Version française 2.1, 23 juillet 2009

personnel. Wacom se réserve le droit de modiﬁer la présente publication sans avertissement préalable. Wacom tente,

dans la mesure du possible, de fournir des informations à jour et précises dans le présent manuel. Toutefois, Wacom se

réserve le droit de modiﬁer toute caractéristique et conﬁguration du produit, sans avertissement préalable et sans

obligation d'intégrer ces modiﬁcations dans le présent manuel.

DuoSwitch est une marque commerciale et Wacom est une marque déposée de Wacom Co., Ltd.

Microsoft, Windows et Vista sont des marques commerciales, déposées ou non, de Microsoft Corporation aux États-

Unis et/ou dans d'autres pays. Apple, le logo Apple et Macintosh sont des marques commerciales d'Apple Computer,

Inc., déposées aux États-Unis et dans d'autres pays.

Tout autre nom de société et de produit mentionné dans la présente documentation peut être une marque commerciale,

déposée ou non. Les produits de fabricants tiers ne sont mentionnés qu'à titre d'information et ne constituent en aucun

cas un engagement ou une recommandation de notre part. Wacom décline toute responsabilité quant aux

performances ou à l'utilisation de ces produits.

Wacom DTF-521 Interactive Pen Display

Installations- und Benutzerhandbuch

Deutsche Version 2.1, 23. Juli 2009

behält sich das Recht vor, ohne vorherige Ankündigung Änderungen an diesem Dokument durchzuführen. Wacom ist

stets bestrebt, in diesem Handbuch nur aktuelle und exakte Informationen zu veröffentlichen. Dennoch behält sich

Wacom das Recht vor, Speziﬁkationen und Produktkonﬁgurationen nach eigenem Ermessen ohne vorherige Mitteilung

und ohne Aufnahme in dieses Handbuch zu ändern.

DuoSwitch ist eine Marke und Wacom ist eine eingetragene Marke von Wacom Co., Ltd.

Microsoft, Windows und Vista sind eingetragene Marken oder Marken der Microsoft Corporation in den USA und/oder

anderen Ländern. Apple, das Apple-Logo und Macintosh sind Marken von Apple Computer, Inc. in den USA und

anderen Ländern.

Alle weiteren in diesem Handbuch erwähnten Firmen- und Produktnamen können Marken und/oder eingetragene

Marken sein. Die Erwähnung von Produkten von Drittherstellern dient Informationszwecken und stellt weder eine

Billigung noch eine Empfehlung dar. Wacom übernimmt keinerlei Verantwortung hinsichtlich der Leistung und der

Verwendung dieser Produkte.

DTF521.book Page 0 Friday, November 16, 2007 3:26 PM

DTF-521

interactive pen display

Installation Guide & User’s Manual

DTF521.book Page -1 Friday, November 16, 2007 3:26 PM

DTF521.book Page 0 Friday, November 16, 2007 3:26 PM

Introduction and overview

Page 1

INTRODUCTION AND OVERVIEW

The Wacom

®

DTF-521 interactive pen display combines the beneﬁts of a Liquid Crystal Display (LCD)

with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives

you a direct pen-on-screen interface for your computer.

The basic components of the DTF-521 include a Wacom pen tablet internally mounted behind a 15.0"

diagonal TFT color display, and a Wacom pen.

The DTF-521 also comes equipped with a VGA pass-thru (

ANALOG RGB OUT) port, enabling you to

simultaneously connect a VGA monitor or projector to the pen display.

This manual describes how to install the DTF-521 hardware and software. It also describes how to use

the DTF-521 and pen. Please follow all instructions carefully.

The computer treats the DTF-521 as two separate devices (the display and the pen tablet).

Therefore, the installation process is completed in two stages:

• First install the DTF-521 as a display.

• Then install the DTF-521 as a pen tablet.

Both stages require hardware and software installations and adjustments. Please follow all

instructions carefully.

IMPORTANT: You MUST install the Wacom pen tablet driver software for correct pen-on-screen

functionality.

To learn about using the Pen Tablet control panel to customize your pen display tablet and pen settings

on Windows or Macintosh computers, see

Customizing

on page 19.

The following kinds of information are not included with this product: information about your speciﬁc

computer hardware or operating system, or information about your application software. Your best

source for this information is the set of manuals and discs that came with your hardware, operating

system, or application.

DTF521.book Page 1 Friday, November 16, 2007 3:26 PM

Precautions

Page 2

PRECAUTIONS

To ensure the safe usage of your product, be sure to follow all instructions, cautions, and warnings

found within this manual. Failure to do so could cause the loss of data or damage to your computer.

Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to

repair or replace the product.

PHYSICAL LOCATION

ENVIRONMENT

WARNING

This symbol indicates an item that, if disregarded, may lead

to loss of human life or serious injury.

C

AUTION

This symbol indicates an item that, if disregarded, may lead

to human injury or damage to personal property.

Exercise due care and diligence whenever engaging in a described action.

W

ARNING

Do not use the DTF-521 pen display in a facility control system that requires extremely

high reliability; it may cause other electronic devices to malfunction, or other devices may

cause the pen display tablet to malfunction. Where use is prohibited, power off theDTF-521

to prevent the possibility of it causing other electronic devices to malfunction. Wacom does

not accept any liability for direct or consequential damages. For details, please refer to your

Warranty located at the end of this manual.

Temperature and humidity

• Operating temperature and humidity: 5˚ to 35˚C, 20 to 80% RH

• Storage temperature and humidity: -10˚ to 60˚C, 20 to 90% RH

C

AUTION

Do not use or store the pen display where:

• Temperature changes are severe or exceed speciﬁcations (e.g., outdoors or inside a

vehicle).

• The pen display and pen are exposed to direct sunlight or heat from an appliance, or are

exposed to water or any other kind of liquid.

C

AUTION

Do not use the pen display in a dusty environment; this may damage the unit.

DTF521.book Page 2 Friday, November 16, 2007 3:26 PM

Precautions

Page 3

USAGE

HANDLING

WARNING

Only use the power adapter that came with the DTF-521. If a different type of power

adapter is used, the DTF-521 will not work properly or may be damaged. Using a different

type of power adapter also has the potential to result in ﬁre. Use of a different power

adapter will void your warranty.

C

AUTION

Be sure to use a grounded power source when applying power to the DTF-521.

C

AUTION

Do not connect or disconnect the video or power cables while the DTF-521 or your

computer are turned on; this may damage the display or computer video card. In this case,

Wacom shall have no responsibility to repair or replace the product.

C

AUTION

This product is for use with a VGA video card; using an inappropriate video card may

damage the DTF-521.

C

AUTION

Do not block the rear panel ventilation holes; this may overheat and damage the unit.

When not using the DTF-521 for long periods of time, unplug the power adapter from

the AC outlet.

W

ARNING

High Voltage. Do not open or disassemble the DTF-521 pen display. There is a risk of

electrical shock when the casing is open. This will also void your warranty and Wacom

shall have no responsibility to repair or replace the product.

W

ARNING

If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking

from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately

with running water for at least 15 minutes or more. If contact is made with the eyes or mouth,

also consult a physician.

W

ARNING

– LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE

RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL

LAWS.

The DTF-521 pen display has a backlight which contains mercury (Hg). Be sure to

dispose of properly, and to manage any disposal of this unit in accordance with your local

ordinances and laws.

W

ARNING

Prevent children from swallowing the pen tip or side switch. The pen tip or side switch

may accidentally be pulled out if children are biting on them.

C

AUTION

Do not disassemble the pen. This may cause the device to malfunction. In this case,

Wacom shall have no responsibility to repair or replace the product.

C

AUTION

Do not scratch the display screen. Avoid placing sharp objects on the display screen

surface.

C

AUTION

When adjusting the tilt angle of the pen display, be careful to avoid catching your

ﬁnger in the gap of the movable portion of the stand.

C

AUTION

Do not lift the DTF-521 by the stand; this may damage the stand mechanism. When

lifting or moving the pen display, always do so by grasping the main body casing.

C

AUTION

Avoid intensive shock or vibration to the DTF-521 or the pen. Hitting or dropping the pen

display may damage the display screen or other components.

Hg

DTF521.book Page 3 Friday, November 16, 2007 3:26 PM

Precautions

Page 4

CAUTION

Do not put heavy articles on the pen display or push against it with a strong force; this

may damage the display screen or bend the stand.

C

AUTION

Do not place heavy articles on the DTF-521 cabling, repeatedly bend the cables

sharply, or apply heavy stress to the cable connectors; this may damage the unit or

cabling.

C

AUTION

If the pen tip becomes sharp or angular, it may damage the coating on the display

screen. Please replace the pen tip if necessary.

C

AUTION

Do not use any organic solvent (e.g., alcohol) or even mild detergent to clean the

display screen. Use of these cleaners can damage the coating on the screen. Please

note that damage of this kind is not covered by the manufacturer's warranty.

• To clean the display screen, use an anti-static cloth or a slightly damp cloth. When

cleaning, apply only a light amount of pressure to the display screen and do not make

the surface wet.

• To clean the pen display casing or pen, use a soft cloth with mild detergent (such as dish

washing liquid) diluted with water.

• Before cleaning, always disconnect your product from the AC power source.

C

AUTION

Do not expose the DTF-521 to high voltage electrostatic discharges or to a build-up of

an electrostatic charge on the LCD screen. This may result in a temporary discoloration

and blotching of the display. If discolorations occur, leave the display on and the

discolorations should disappear within a few hours.

Reuse, recycling and recovery. You are urged to recycle this product when replacing it with

a newer product or when it has outlived its useful life by bringing it to an appropriate collection

point for recyclable materials in your community or region. By doing this, you can help

improve the environment of your community as well as minimize the potential negative effects

created, should any hazardous substance that may possibly be present within waste material

reach the environment during the disposal process.

Within the European Union, users are required not to dispose of Waste Electrical and

Electronic Equipment (WEEE) as unsorted municipal waste, according to the

Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003,

or the corresponding local laws of the Member States. Products for which this is applicable

will be marked with the WEEE symbol shown at the beginning of this note unless this is not

feasible because of the size or the function of the product. Wacom products are subject to the

Directive 2002/96/EC and therefore you should always collect them separately and bring

them to the appropriate collection point in your community or region.

Wacom pen display products comply with the European Union RoHS Directive 2002/95/EC

(RoHS Directive).

DTF521.book Page 4 Friday, November 16, 2007 3:26 PM

Contents

Page 5

CONTENTS

Introduction and overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Your new DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Interactive pen display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Step 1: LCD monitor installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

LCD monitor cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Step 2: Pen tablet installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

USB cable installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pen tablet cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Working with your DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Setting up your work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using the pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Pen components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Pen operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Customizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Opening the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Control panel overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Customizing the pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Calibrating the DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Customizing the Pop-up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Control panel details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting double-click . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Customizing the side switch button functions . . . . . . . . . . . . . . . . . . . 24

Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Factory presets, auto-sync, and user settings . . . . . . . . . . . . . . . . . . . 27

On Screen Display (OSD) settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Adjusting pitch and phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Power saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

DTF521.book Page 5 Friday, November 16, 2007 3:26 PM

Contents

Page 6

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Testing the DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Display troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

General display problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

VGA problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Pen tablet troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Windows-speciﬁc problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Macintosh-speciﬁc problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Technical support options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Obtaining driver downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Caring for the DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Replacing the pen tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Using an alternate mount or stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Pen and digital ink capabilities in Windows Vista . . . . . . . . . . . . . . . . . . . . 46

About the Windows Vista Tablet PC Input Panel . . . . . . . . . . . . . . . . . 47

Uninstalling the DTF-521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Product speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

General speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Pen tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Pen (model FP-320) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Ordering parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Radio and television interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Federal Communications Commission (FCC) notice . . . . . . . . . . . . . 51

Industry Canada (Canada only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

CE declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Warranty (Worldwide, Except for Europe, Africa and Middle East) . . . . . . 53

Warranty (Europe, Africa and Middle East) . . . . . . . . . . . . . . . . . . . . . . . . 55

DTF521.book Page 6 Friday, November 16, 2007 3:26 PM

Your new DTF-521

Page 7

YOUR NEW DTF-521

PACKAGE CONTENTS

Carefully unpack all items and place them on a desktop or stable work surface. Verify that your package

contents are complete.

Note: Images not shown to scale. Some product conﬁgurations may come with different pens having no side

switches. Some conﬁgurations may include additional CDs or DVDs containing application software. To install

these applications, review the instructions that came with those CDs or DVDs. Retain the package box for use

when storing or shipping the DTF-521.

DTF-521 interactive pen display, main unit

Power adapter and power cable

(POW-A096 and SCD-A039-01 for USA)

(POW-A096 and SCD-A038-01

or SCD-A040-01 for Europe)

USB cable (STJ-A250)

VGA to VGA cable (STJ-A228)

Pen with replacement nibs, pen tether,

tether connection ring, and attachment screw

(FP-320, PKB-A016, MHO-A052, and MNE-A061)

Installation Guide & User’s Manual

(this manual)

Wacom Pen Tablet Driver CD

(contains the driver software)

DTF521.book Page 7 Friday, November 16, 2007 3:26 PM

Your new DTF-521

Page 8

INTERACTIVE PEN DISPLAY COMPONENTS

Your product has many features and components with which you will want to become familiar.

FRONT VIEW

The display and tablet sensor function as an integrated output and input device. The display supports

resolutions up to 1024 x 768 pixels at 16.2 million colors. The tablet sensor reports pen coordinates,

pressure, and switch information.

On Screen Display (OSD) controls

These controls, located on the upper

edge of the tablet, enable you to adjust

a variety of display settings. See

Adjusting the display

on page 27 for

more information.

Power LED

Lights blue when power has been supplied to the DTF-

521 and a video signal is present.

Glows orange when no video signal is detected by the

DTF-521. (e.g., Your computer is turned off, starting up,

or has entered a power management mode in which

video signals are not sent.)

Power switch

Turns power to the unit on or off.

Status LED

Lights blue when the pen is in

the active area of the pen

display tablet and the pen tip

is pressed. Note that the USB

cable must also be plugged

into an active USB port before

the LED will light.

Integrated display and tablet

Use the integrated USB

ports (one located on each

side of the unit) to connect a

USB device (e.g., a USB

Flash Drive or a USB remote

controller).

Be sure to fully install the

DTF-521 hardware and

software before connecting

any other devices to the unit.

Pen tray

Provides a convenient resting place for the pen. When the display stand

is set to its lowest position, place your ﬁngers beneath the tray (located

on the bottom front edge) and slide it out.

DTF521.book Page 8 Friday, November 16, 2007 3:26 PM

Your new DTF-521

Page 9

REAR VIEW

Video, USB, and

power connectors

Kensington security slot

Allows easy attachment of

a security cable.

Pen tether attachment points

If you will be using the pen tether,

use the tether attachment ring and

small thumb screw to connect it to

one of four attachment points

located on the back of the unit.

Stand adjustment lever

Pull this lever up to adjust

the stand. Release the

lever to lock the stand in

place.

Important: Always store the pen display on a stable surface or in its original packing carton when not

in use. Be sure to adjust the stand to the low tilt position before packaging the DTF-521. If you do not

close the stand, the notched mechanism may be damaged during transportation and storage.

Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the

DTF-521, always do so by grasping the main body casing.

C

AUTION

Be careful to avoid catching your ﬁnger in

the gap of the movable portion of the stand.

Stand

The stand can be used

to adjust the tilt angle of

the unit.

Pen storage compartment

F

or storage, insert one end of the pen into either side of the storage compartment.

Then gently press the other end of the pen into the compartment.

F

or removal, press in on either end of the pen. This will pop the opposite end of the

pen out of the compartment. You can then remove the pen.

DTF521.book Page 9 Friday, November 16, 2007 3:26 PM

Installation

Page 10

INSTALLATION

SYSTEM REQUIREMENTS

Before installing the DTF-521, make sure your computer meets the following minimum system

requirements:

• PC. Windows Vista™, Vista X64, XP, XP x64, or 2000. VGA video connector, available USB port,

and CD-ROM drive.

• Macintosh. OS X, v10.3.9 or greater. VGA video connector, available USB port, and CD-ROM

drive.

Notes: The DTF-521 can be used alone or with another display. You may connect a second VGA device such

as a monitor or LCD projector to the DTF-521

ANALOG RGB OUT port. When using this port, the second

device will mirror the image on the DTF-521. Complete the DTF-521 installation before connecting a projection

device to the unit.

Depending on the capabilities of your video card and operating system, you may be able to set up the

DTF-521 as a mirrored, extended, or independent display. Refer to your video card documentation for more

information on its capabilities.

When you are working with more than one monitor, the DTF-521 will map to the monitors based upon how

your system is conﬁgured. By default, if you are in mirror mode, the pen tablet will map to the entire space on

each display or monitor. Please refer to your hardware and operating system documentation for details on

conﬁguring your computer and operating system for use with multiple monitors.

There are two primary steps to the installation process:

• Step 1: LCD monitor installation

• Step 2: Pen tablet installation

Be sure to follow ALL instructions carefully.

DTF521.book Page 10 Friday, November 16, 2007 3:26 PM

Installation

Page 11

STEP 1: LCD MONITOR INSTALLATION

In the ﬁrst stage of the installation process, the DTF-521 is installed as a monitor on your system. As

you work through the ﬁrst stage of the installation process, please refer to the

LCD monitor cabling

diagram

on the following page when making cable connections.

Important: Do not connect the USB data cable until instructed to do so.

• Turn off your computer.

Caution: Never connect or disconnect the video or power cables while your computer or DTF-521

are powered on – this can damage the display or video card.

• If your computer has only one analog (VGA) video connector, you will need to unplug your previous

monitor or add a second VGA card.

• Connect the power adapter to the DTF-521. Then connect the adapter’s power cable and plug the

adapter into an AC outlet. See – B – and – C –

• Turn on the DTF-521. The power LED will light orange.

• Plug one end of the VGA cable into the DTF-521. Plug the other end of

the cable into the VGA connector on your computer’s video card. See –

A – in the connection diagram on page 12. Be sure to tighten the

thumbscrews on the connectors.

VGA connector

DTF521.book Page 11 Friday, November 16, 2007 3:26 PM

Installation

Page 12

LCD MONITOR CABLING DIAGRAM

DTF-521, rear view

– B –

DC IN

(12V)

– A –

VGA cable

Video card

Rear panel of your computer

ANALOG RGB OUT

Do not attach the USB data

cable until instructed to do so.

Power adapter – C –

To AC outlet

C

AUTION

Use only the power adapter that came with the DTF-521; use of an improper power

adapter may damage the unit.

Do not connect or disconnect the video or power cables while the DTF-521 or your

computer are turned on – this can damage the display or computer video card.

Make sure that the display refresh rate does not exceed 70 Hz for XGA mode, or 75 Hz

for other modes.

ANALOG RGB IN

VGA port

The ANALOG RGB OUT port is used

to connect a second VGA device

such as a projector or monitor that

mirrors the pen display. Be sure to

fully install the DTF-521 hardware

and software before connecting a

projection device to the unit. Do not

connect or disconnect any cable

while the DTF-521 or your computer

are turned on.

DTF521.book Page 12 Friday, November 16, 2007 3:26 PM

Installation

Page 13

• Next, turn on your computer.

F

or Windows systems: The DTF-521 will automatically install as a default monitor.

• As necessary, conﬁgure the display control panel settings for the proper size and color resolution.

The maximum (native) resolution of the DTF-521 is 1024 x 768 pixels. The display size and color

resolution may be constrained by the capabilities of your video card. See the video card

manufacturer’s documentation for details.

Windo

ws: If you are using the DTF-521 as a secondary display, you may ﬁrst need to enable the

DTF-521 in your Display Properties control panel.

• To ﬁne-tune the display, please refer to

Adjusting the display

, beginning on page 27 for more

information.

• After the LCD monitor portion of the DTF-521 is working to your satisfaction, move on to

Step 2:

Pen tablet installation

to install the pen tablet portion of the DTF-521. For troubleshooting tips,

see page 32.

Notes:

Each DTF-521 LCD panel is produced under very stringent quality standards. Production techniques cannot

guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number of pixels that

show an incorrect color. See the speciﬁcations on page 49 for more information.

If an image has ﬁne striping (such as screen stripes), it may appear to ﬂicker or display a moiré pattern.

Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or pooling

pattern. If this occurs, use less pressure on the display screen when working with the pen.

When a still image is displayed for a long period of time, an after-image may remain for a short time. To prevent

this, Wacom recommends using a screen saver or other power management feature.

Important: To extend the life of the backlight, set your computer’s power management to turn

off the display when it is not in use for extended periods of time.

DTF521.book Page 13 Friday, November 16, 2007 3:26 PM

Installation

Page 14

STEP 2: PEN TABLET INSTALLATION

USB CABLE INSTALLATION

Plug the square end of the USB cable into the DTF-521 port labeled USB. Plug the other end into an

available USB port on your computer or on a USB hub attached to your computer. See – D – in the

diagram below.

PEN TABLET CABLING DIAGRAM

DTF-521, rear view

To USB port

Your computer

– D –

USB port

To power adapter. See page 12.

To video connection. See page 12.

DTF521.book Page 14 Friday, November 16, 2007 3:26 PM

Installation

Page 15

SOFTWARE INSTALLATION

IMPORTANT: You MUST install the Wacom pen tablet driver software for correct pen-on-screen

functionality.

To install the tablet software:

• Save your work and close all open applications. Temporarily disable any virus protection programs.

• Insert the Wacom Pen Tablet Driver CD into your computer’s CD-ROM drive. If the software installer

menu does not automatically display, double-click on the I

NSTALL icon located on the CD.

• Click on the INSTALL TABLET link and follow the prompts to install the driver software.

• Reactivate your virus protection program.

• After the software installation has been completed, make sure you can use your pen on the

DTF-521 display to move the screen cursor.

When you place the pen tip on the display screen, the screen cursor should immediately jump to a

corresponding position approximately beneath the pen tip. Lift the pen tip and place it on the display

screen surface in a different location – the screen cursor should again jump to the new position.

This is known as absolute positioning, and enables you to position the screen cursor without having

to drag your pen across the display screen surface.

• Be sure to check the Read Me ﬁle for updated information. If you have trouble installing the

DTF-521, see the

Troubleshooting

section beginning on page 32.

Notes:

For Windows Vista, driver installation automatically activates the new pen input functions available within

Windows Vista and Ofﬁce 2007 (except for Windows Vista Home Basic).

For Windows Vista, XP, and Macintosh OS X, user-speciﬁc preferences are supported. After logging in, each

user can customize their personal settings in the Pen Tablet control panel. Switching to another user will

automatically load the settings for that user.

T

o uninstall the tablet driver, see

Uninstalling the DTF-521

on page 48.

Next, adjust the pen display tablet calibration to precisely align the screen cursor to the pen tip. See

Calibrating the DTF-521

on page 22.

DTF521.book Page 15 Friday, November 16, 2007 3:26 PM

Working with your DTF-521

Page 16

WORKING WITH YOUR DTF-521

As you work with the DTF-521 interactive pen display you can rest your hand lightly on the display

screen, just as if it were a drawing board or sheet of paper.

Because the DTF-521 surface will be a little higher than your desk, consider adjusting the height of your

desk or chair to assure comfortable use of the device.

SETTING UP YOUR WORK AREA

To minimize fatigue, organize your work area so you can work comfortably. Position the DTF-521, the

pen, and your keyboard so they are easily accessible without unnecessary reaching. The pen display

and any other displays should be positioned so you can view them comfortably with a minimum of

eyestrain.

Here are some other points to keep in mind:

• Take short breaks between tasks to stretch and relax your muscles.

• Use a gentle grip when working with the pen.

• Alternate tasks throughout the day.

• Maintain a good posture at all times. Minimize awkward postures and repetitive movements that

cause discomfort. Change your position if you feel any discomfort due to your work position.

• Alternate between different modes of use.

Note: Wacom makes no representation, promise or guarantee that Wacom products will cure or prevent,

in whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions. Individual results

may vary. Always obtain competent medical advice to determine the most appropriate treatment for your

speciﬁc situation.

Tips:

• Be careful that you do not pull the cables out of their connections by accidentally moving the DTF-521 too

far from the computer.

• The pen tether can be used to ensure your pen stays with your pen display. Simply loop one end of the

tether through the tether hole located on the pen, and the other end of the tether through the tether

connection ring. Then use the small thumb screw to attach the tether ring to one of the four attachment

points located on the back of the unit.

• The DTF-521 can also be mounted to articulated arms or other third-party stands meeting the VESA 75

speciﬁcation for display stands. For details, see

Using an alternate mount or stand

on page 45.

DTF521.book Page 16 Friday, November 16, 2007 3:26 PM

Page is loading ...

Wacom DTF-521 User manual

Related papers

Other documents