Ikan PT3700-TK is a teleprompter kit that includes a hard case for travel, a teleprompter frame assembly with a monitor, a camera mount assembly, and a hood. This teleprompter is designed for use with DSLR and camcorder cameras and features a 15mm rod system for attaching the camera mount and other accessories. The teleprompter also includes a 200mm riser bar for positioning the camera higher if needed.
PT3700-TK
PT3700 Teleprompter & Hard Case Travel Kit
QUICKSTART GUIDE
Checked by
www.ikancorp.com
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
1.713.272.8822
support@ikancorp.com
© 2014 ikan Corporation. All right reserved
QUICKSTART GUIDE
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
What’s included
www.ikancorp.com 713-272-8822
Teleprompter Frame
Assembly with Monitor
Camera Mount
Assembly
18"Rods x2Hood 200mm Riser
Rods x2
PrompterPro Software
5/32 Hex Key Cork Strips x 4
DRS-01 x 2
PT-CASE
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
713-272-8822
www.ikancorp.com
Place teleprompter
frame assembly on a at
surface and slide the 18
in. rods into rod mounts.
Rod Mounts
You can position the
glass at any angle you
want but the preferable
angle is 45°
STEP 1:
STEP 2:
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
713-272-8822
www.ikancorp.com
The tripod mount has 3
sets of holes that allow
you to mount the plate
either towards the front or
rear to help balance the
telepromter better.
For larger cameras its is
better to have the plate
toward the rear and for
smaller cameras towards
the front.
STEP 3:
Slide the Camera Mount
Assembly onto the 15mm
Rods.
Use the included
5/32 Hex Key to
remove and attach
the Raiser Rods.
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
713-272-8822
www.ikancorp.com
Attach camera to
camera mount and
slide to best position.
Make sure all thumb
screws are secure.
If you require the camera to
be positioned higher you
can replace the 200mm
raiser bars in place of the
pre-installed 130mm Rods.
STEP 4:
DSLR
CAMCORDER
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
713-272-8822
www.ikancorp.com
Attach hood to glass frame
using the integrated
magnets. You can attach
the optional side aps.
STEP 5:
PT3700 Teleprompter & Hard Case Travel Kit
www.ikancorp.com 713-272-8822
ON
OFF
MENU
FLIP
VIDEO
VGA
HDMI
POWER
Power switch (I = On, O = Off)
Toggle up to adjust setting
MENU
Access to all monitor settings:
Brightness, Contrast, etc
Toggle down to adjust setting
FLIP
Flip image horizontally
VIDEO
Composite Input BNC Connection
VGA
Video Graphics Array DE15
Connection
HDMI
Input
Connection
*Flip function is not available on the*
PT3700. Flip function available in
Prompter Pro 4 Software.
PT3700-TK
QUICKSTART GUIDE
PT3700 Teleprompter & Hard Case Travel Kit
Checked by
www.ikancorp.com 713-272-8822
Glass can be removed from
the frame by removing the
two phillip head screws.
Easily slide the glass out
of the frame.
*You should only need to do this for cleaning*
PT3700-TK
QUICKSTART GUIDE