Emac NVA13516, NVA1312, NVA1338 User manual

  • Hello! I am an AI chatbot trained to assist you with the Emac NVA13516 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TECHNICAL FILE
R03.001_25/06/2010
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novonivel® Aluminum
Page 2 of 2
1. Spread a big amount of gripping material on the surface where you will install the prole.
2. Then, place the prole and press it to let gripping material pass through the mechanized holes of
the xing wing.
3. Place a tile on the xing wing and press it to achieve an optimal contact with the gripping material.
4. Repeat the process, placing tiles along the xing wing of the prole.
5. Finally, clean the remaining material and let dry.
Placement
To see the video, capture this
image with your mobile phone
(software QR code reader is
necessary)or click on it.
1 2
3
4 5
Cleaning and maintenance
The product must be cleaned periodically with a soft mop. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Indoors Outdoors
Floorings
Recyclable
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
/