LOKATSE AC18804D Operating instructions

Brand
LOKATSE
Model
AC18804D
Type
Operating instructions

This manual is also suitable for

A
S
SEMBLY INSTRUCTION
Part #
QTY
A 2
2
1
1
1
4
B
C
D
E
F
Please check and make sure you have
all the parts available before you start
with the assembly.
Assembly should be performed on
a clean and soft surface, e.g. flat
carton box can be used.
Washer
Chair Back
Chair Base
Please read the instruction before assembly.
Reference Picture
Front Leg
Rear Leg
Cushion
C
D
E
A
B
Description
Step 1. Please stand behind the chair base and gently insert chair back into the chair base.
Firmly but gently, push the chair back downwards until the back is fully slotted
Please make sure there is no gap between the chair back and the chair base.
Step 2. Lay down the chair base. Put one
washer on one forth leg, then insert threaded leg
into the mounted position. Gently screw the
leg into chair base. Make sure the leg is screwed
tightly. Repeat the same process for the other 3 legs.
Step 3. Put cushion properly. Finish and enjoy your chair!
Caution! The chair can only be used on a flat surface to avoid any fall down.
Care and Maintenance
1. Do not place it near any fire, heater or flame.
2. Do not clean it with any sharp cleaning tools as this may damage the fabric.
3. For indoor use only, avoid any patio purposes.
4. Place it in dry and cool place, avoid direct sunlight.
5. Clean it with mild soap and damp non-colored cloth.
6. Please do not write or draw on it, such stains may be permanent.
7. Children should not climb or jump on the chair.
8. Small parts-Choking Hazard- Not for children.
Imported by Festival Trading Inc.
Chair back
Chair base
C
F
A
D
C
D
  • Page 1 1
  • Page 2 2

LOKATSE AC18804D Operating instructions

Brand
LOKATSE
Model
AC18804D
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents