Feiss WB1859DSGL Installation guide

Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Install the finials to the top and bottom of the fixture using the screws and washers.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the shade to the top of the fixture and secure it in place using the cap screws.
1
2
3
1A
4
Tilling Wall
1.1
W 1859B
W 1859B
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
FINIAL
SHADE
LAMP
SOCKET
3
1
CAP SCREW
FINIAL
SCREW AND WASHER
1
2
4
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss WB1859DSGL Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI