Construction Metals KM625 Operating instructions

KWIKMESH™

INSTALLATION GUIDELINES

These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed

professional, and to check with your local building inspector or building permit office for approvals and possible variations that may apply.

Kwikmesh is a multi-use screening material in conveniently sized rolls. Recommended uses include ventilation for

new construction, vent repair, rodent and insect control, and tree trunk protection. Kwikmesh is made from 1/8 in.

corrosion resistant galvanized expanded metal. Kwikmesh is a versatile addition to any toolbox.

1. Remove the old or damaged vent. Using ordinary

avaition shears cut a piece of Kwikmesh™ that is at least

1 inch larger than the hole you’ll be covering.

Kwikmesh™ cuts easily with standard aviation shears.

Ordinary scissors will not be strong enough.

Cutting Kwikmesh™ exposes many sharp points and the

roll tension may cause it to spring back. Always wear eye

protection and gloves when working with Kwikmesh™

2. Staple along the top with approximately 1 inch

spacing, keeping the Kwikmesh smooth and at.

Continue with the sides and nish with the bottom.

This manual is also suitable for

Download PDF