Construction Metals KM425, KM1220, KM625 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Construction Metals KM425 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KWIKMESH™
INSTALLATION GUIDELINES
These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed
professional, and to check with your local building inspector or building permit office for approvals and possible variations that may apply.
Kwikmesh is a multi-use screening material in conveniently sized rolls. Recommended uses include ventilation for
new construction, vent repair, rodent and insect control, and tree trunk protection. Kwikmesh is made from 1/8 in.
corrosion resistant galvanized expanded metal. Kwikmesh is a versatile addition to any toolbox.
1. Remove the old or damaged vent. Using ordinary
avaition shears cut a piece of Kwikmesh™ that is at least
1 inch larger than the hole you’ll be covering.
Kwikmesh™ cuts easily with standard aviation shears.
Ordinary scissors will not be strong enough.
Cutting Kwikmesh™ exposes many sharp points and the
roll tension may cause it to spring back. Always wear eye
protection and gloves when working with Kwikmesh™
2. Staple along the top with approximately 1 inch
spacing, keeping the Kwikmesh smooth and at.
Continue with the sides and nish with the bottom.
1/1