You should have received the following parts in the package.
Please ensure that all parts are accounted for.
4 PC
A
Mirror
SUGGESTED TOOLS (NOT SUPPLIED)
Phillips
Screwdriver
Drill
Hammer
PencilLevel
Installation instructions
If installing to studs, please see below:
1. Mark spots on the wall.
2A. Install (4) nails (not supplied)
to the studs.
If installing to drywall, please see below:
2B. Drill (4) pilot holes on the
marked spots and insert (4) plastic
anchors (not supplied).
2C. Install (4) wood screws (not
supplied) to the (4) plastic anchors.
3. Hang (4) mirrors (A) to wall by
attaching the brackets on back of the
mirrors to the nails or wood screws.
Brackets
(2 pcs)
NOTE: Hardware not supplied, contact
your local hardware professional to
choose an attachment mechanism
appropriate for your wall.
Wood screw
(not supplied)
Hole in wall
Plastic anchor
(not supplied)
A
NOTE: Each mirror has 2 brackets,
use one bracket only to hang the
mirror to get different looking.