Generation Lighting F3217/20SMS Installation guide

Type
Installation guide
1
Installation Instructions for
Install the fixture arms by hooking them to the loops on the hub and fixture.
Install the candle tubes by slipping them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
1
2
1A
Landen Chandelier
1.0
F3213-6_F3214-8_F3215-12_F3216-12_F3217-20
F3213-6, F3214-8, F3216-12
F3215-12, F3217-20
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
Chandelier
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
FIXTURE ARM
LAMP
HUB
LOOP
LOOP
2
FIXTURE ARM
CANDLE FOLLOWER
CANDLE
SOCKET
4
5
3
2
1
1
5
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Generation Lighting F3217/20SMS Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI