Highwood AD-KITCHDA2-CGE Operating instructions

Highwood
Brand
Highwood
Model
AD-KITCHDA2-CGE
Type
Operating instructions
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Deck Chair
Assembly Guide
1) Insert an A bolt into lower hole to on each side
attach Seat to Back. Make sure the back is fully upright.
Make bolts snug, but do not overtighten.
AD-CHDA2
10.13.16
A
x10
1/4"-20 x 1-3/4"
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Deck Chair
Assembly Guide
AD-CHDA2
10.13.16
2) With the chair laying on its left side, attach
the Right Leg to the Seat using 3 A bolts.
3) Flip chair and lay on right side. Repeat for Left Leg.
A
Note: Arm goes on
top of back support
4) Attach arms to the back using 2 A bolts.
5) Tighten all bolts. Enjoy your Highwood Chair!
A
RIGHT LEG
SEAT
ARM
BACK
  • Page 1 1
  • Page 2 2

Highwood AD-KITCHDA2-CGE Operating instructions

Highwood
Brand
Highwood
Model
AD-KITCHDA2-CGE
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents