ClosetMaid Support Bracket Installation guide

Brand
ClosetMaid
Model
Support Bracket
Type
Installation guide

ClosetMaid Support Bracket is a versatile and sturdy solution for supporting shelves in various applications. It is designed to support the front of 12-inch and some 16-inch shelving, making it suitable for a wide range of storage needs. The bracket's adjustable design allows for precise positioning on the shelf, ensuring a secure and level installation. It is ideal for both wall-to-wall and open-to-open shelving configurations, providing flexibility in shelf placement. The ClosetMaid Support Bracket comes with pre-loaded anchors for easy and secure mounting.

ClosetMaid Support Bracket is a versatile and sturdy solution for supporting shelves in various applications. It is designed to support the front of 12-inch and some 16-inch shelving, making it suitable for a wide range of storage needs. The bracket's adjustable design allows for precise positioning on the shelf, ensuring a secure and level installation. It is ideal for both wall-to-wall and open-to-open shelving configurations, providing flexibility in shelf placement. The ClosetMaid Support Bracket comes with pre-loaded anchors for easy and secure mounting.

76606
QTY / 2
CONT / 2
01-11464-00
Products of USA and China
Produits des É.-U. et de la Chine
Productos de EE.UU. y China
© 2019 ClosetMaid LLC
Ocala, FL 34471
1-800-874-0008 (USA, Canada)
USE AND CARE: Supports front of 12 in. and some 16 in. shelving. ■ UTILISATION ET ENTRETIEN:
Prend en charge les tablettes avant de 12 po et quelque 16 po. ■ USO Y CUIDADO: Soporta estantes
de 12 pulgadas y unos 16 pulgadas.
Tools Required (not supplied)
Outils requis (non fournis)
Herramientas requeridas (no incluidas)
Supplied / Fourni / Suministrado
0.25 in.
0,64 cm
Support Bracket (2)
Support de support (2)
Soporte de apoyo (2)
Pre-Loaded Anchor (2)
Ancre pré-chargée (2)
Ancla precargada (2)
1
Use one support bracket 2 to 3 in. from each end of shelf and no further tha 36 in. apart.
Position support bracket on shelf as shown. Note proper position for various shelf types. ■
Use una abrazadera de soporte de 2 a 3 pulg. De cada extremo del estante y no más de las 36 pulg.
Separadas. ■ Use una abrazadera de soporte de 2 a 3 pulg. De cada extremo del estante y no más de
las 36 pulg. Separadas.
12 in.
30,48 cm
16 in.
40,64 cm
12 in.
30,48 cm
16 in.
40,64 cm
Shelf & Rod
Étagère et tige
Estante y barra
Shelf & Rod
Étagère et tige
Estante y barra
SuperSlide
®
SuperSlide
®
SuperSlide
®
SuperSlide
®
SuperSlide
®
SuperSlide
®
2
Level shelf. Drill 0.25 in. hole through wall using support bracket as guide. (do not punch holes)
■ Niveau plateau. Percer un trou de 0,64 cm à travers le mur en utilisant le support comme
guide. (ne pas percer de trous) ■ Plataforma de nivel. Perfore un orificio de 0,64 cm A través de la
pared usando el soporte de soporte como guía. (no hacer agujeros)
3
Push pre-loaded anchor through support bracket and into drilled hole. Use bottom of hammer
handle to push in pin. For removal, pry pin out with screwdriver. ■ Poussez l’ancrage
préchargé à travers le support et dans le trou foré. Utilisez le bas de la poignée du marteau pour
insérer la goupille. Pour le retrait, soulevez la goupille avec un tournevis. ■ Empuje el anclaje
precargado a través del soporte de soporte y en el orificio perforado. Use la parte inferior del mango
del martillo para empujar el pasador. Para retirarlo, saque el pasador con un destornillador.
4 ft.
121,92 cm
1
2
3
6 ft.
182,88 cm
1
2
3
8 ft.
243,84 cm
2
3
4
12 ft.
365,76 cm
3
4
5
Wall to wall; Mur contre mur; Pared a pared
Wall to open; Mur à ouvrir; Muro para abrir
Open to open; Ouvrir pour ouvrir; Abierto para abrir
Support brackets needed per shelf (by shelf length):
Supports de support nécessaires par étagère (par longueur d’étagère):
Soportes de soporte necesarios por estante (por longitud de estante):
Manufacturer reserves the right to
change specifications without notice.
Le fabricant se réserve le droit
d’apporter des changements aux
caractéristiques sans préavis.
El fabricante se reserva el derecho
de modificar las especificaciones sin
previo aviso.
6606-76606_01-11464-00_BC_1-19.indd 2 3/14/19 11:08 AM
  • Page 1 1

ClosetMaid Support Bracket Installation guide

Brand
ClosetMaid
Model
Support Bracket
Type
Installation guide

ClosetMaid Support Bracket is a versatile and sturdy solution for supporting shelves in various applications. It is designed to support the front of 12-inch and some 16-inch shelving, making it suitable for a wide range of storage needs. The bracket's adjustable design allows for precise positioning on the shelf, ensuring a secure and level installation. It is ideal for both wall-to-wall and open-to-open shelving configurations, providing flexibility in shelf placement. The ClosetMaid Support Bracket comes with pre-loaded anchors for easy and secure mounting.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents