2. Toro
  3. Discharge Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mower for Walk-Behind Mower

Toro Discharge Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mower for Walk-Behind Mower, Trim Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mower for Walk-Behind Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Discharge Side Anti-Scalp Roller Kit, 48-inch TURBO FORCE Floating Mower for Walk-Behind Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3359-184RevA
Trim/DischargeSideAnti-ScalpRollerKit
48inTURBOFORCE
®
FloatingMowerforWalk-BehindMower
ModelNo.115–1015
ModelNo.115–1016
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Rollerbracket1
Carriagebolt(3/8x3/4inch)
3
1
Flangenut(3/8inch)
3
Installtherollerbracket.
Anti-scalproller1
Bolt(3/8x4-1/2inches)
1
Longspacer1
Shortspacer
1
2
Flangenut(3/8inch)
1
Installtheanti-scalproller.
1
InstallingtheRollerBracket
Partsneededforthisprocedure:
1Rollerbracket
3
Carriagebolt(3/8x3/4inch)
3
Flangenut(3/8inch)
Procedure
1.Preparetheinstallationsiteasfollows:
•Ifyouarereplacinganexistinganti-scalproller,
removetheroller,rollerbracket,andallfasteners
fromthemoweranddiscardthem.
•Ifyouareinstallingtheanti-scalprollerforthe
rsttime,locatethethreeholesonthereartrim
ordischargesideofthemower(dependingon
whichkityouareinstalling)andremovethethree
boltsandnutsthatareinstalledintheholes.
2.Installtherollerbrackettothemowerusing3
carriagebolts(3/8x3/4inch)andangenuts(3/8
inch)(Figure1).
Important:Ensurethatyouinstallthecarriage
boltswiththeboltheadsontheinsideofthe
mowerdeckandthenutsontheoutside.
©2007—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
Figure1
1.Rollerbracket
5.Bolt(3/8x4-1/2inches)
2.Carriagebolt(3/8x3/4
inch)
6.Shortspacer
3.Flangenut(3/8inch)
7.Longspacer
4.Anti-scalproller
2
InstallingtheAnti-ScalpRoller
Partsneededforthisprocedure:
1Anti-scalproller
1
Bolt(3/8x4-1/2inches)
1Longspacer
1
Shortspacer
1
Flangenut(3/8inch)
Procedure
1.Slidethelongspacerintotheanti-scalproller
(Figure1).
2.Placetheshortspacerinsidetherollerhubonthe
sideoftherollerwiththeshorthub(Figure1).
3.Placetherollerintotherollerbracketandpushthe
bolt(3/8x4-1/2inches)throughthebracket,short
spacer,andthelongspacer/rollerassemblyatthe
desiredheight(Figure1).
Note:Inserttheboltsothatitsheadistowardthe
outsideofthemower.
4.Securetherollerwithaangenut(3/8inch)
(Figure1).
2
/