Kegco HK38SSC-1 User manual

Brand: Kegco

Model: HK38SSC-1

Category: Drink coolers

Type: User manual

This manual is also suitable for

www.kegco.com 1 1-888-980-4810

INSTRUCTION MANUAL

HK-38 FULL SIZE KEGERATOR

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Kegco has a policy of continuous improvement on its products and

reserves the right to change materials and specifications without notice

KEGCO

8520 Miralani Dr., San Diego, CA 92126

www.kegco.com 2 1-888-980-4810

Table of Contents

Safety Tips

.......................................................................................................................................

Installation Instructions

.......................................................................................................................................

Caster Installation

.......................................................................................................................................

Guardrail Installation

.......................................................................................................................................

Handle Installation

.......................................................................................................................................

Care and Maintenance

.......................................................................................................................................

Energy Saving Tips

.......................................................................................................................................

Operation Instructions

.......................................................................................................................................

Troubleshooting

.......................................................................................................................................

Technical Specifications

.......................................................................................................................................

8-10

Energy Guide

.......................................................................................................................................

Warranty Information

.......................................................................................................................................

www.kegco.com 3 1-888-980-4810

Safety Tips

Before using this appliance, it must be properly positioned and installed as described in this manual, so please read the

manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic

precautions. Failure to heed these safety requirements may result in severe personal injury or death.

 Plug into a grounded 3-prong outlet. Do not under any circumstances cut or remove the third ground prong

from the power cord supplied, do not use an adapter, and do not use an extension cord.

 It is recommended that a separate circuit, serving only your appliance be used. Do not use outlets that can be

turned off by a switch or pull chain.

 Never clean appliance parts with flammable fluids and do not store or use gasoline or other flammable vapors

and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

 Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical

shock or death.

 Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this

manual. All other servicing should be referred to a qualified technician.

 Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

 To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose

a well-ventilated area with temperatures above 50°F (10°C) and below 109.4°F (43°C). Do not install in a location

where the unit will be exposed to direct sun exposure as this may result in unsatisfactory performance.

 The appliance should not be located next to ovens, grills or other high heat sources or in areas of extreme cold.

 The appliance must be installed in accordance with state and local codes. A standard electrical supply (115 V AC

only, 60 Hz), properly grounded in accordance with the National Electrical Code and local ordinances is required.

 Do not kink or pinch the power supply cord of appliance.

 The fuse (or circuit breaker) size should be 15 amperes.

 It is important for the appliance to be leveled in order to work properly.

 Never allow children to operate, play with or crawl inside the appliance. Child entrapment and suffocation are

not just problems of the past, junked or abandoned appliances are still dangerous. When no longer using your

old appliance, take off the door and leave the shelves in place so that children may not climb inside easily.

 Do not use solvent-based cleansers or abrasives on the interior as they may damage or discolor the interior.

 Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an

extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it

be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and

that the electrical rating of the cord be 115 volts and at least 10 amperes.

 If the appliance is going to be used in an area that is prone to power surges/outages, it is suggested that you use

a power surge protector. The surge protector that you select must have a surge block high enough to protect

the appliance it is connected to. Damages due to power surges are not considered a manufacturer covered

defect and will void your product warranty.

 The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the

receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do

not use a cord with cracks or abrasion damage along its length or at either end. When moving the appliance, be

careful not to damage the power cord.

 Do not use this apparatus for other than its intended purpose.

 California Proposition 65 Warning: This product may contain a substance known to the State of California to

cause cancer, birth defects or other reproductive harm.

Failure to heed these safety warnings may result in extensive product damage, serious personal injury, or death.

www.kegco.com 4 1-888-980-4810

Installation Instructions

BEFORE USE:

 Remove the exterior and interior packaging, but do not remove any foam insulation surrounding the pipes at the

back.

 Before connecting the unit to the power source, let it stand upright for approximately 8 hours. This will reduce

the possibility of a malfunction in the cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

 Place the unit on a flat, solid floor that is strong enough to support it when it is fully loaded. To level the

appliance, adjust the rolling casters at the bottom of the unit.

 When moving your refrigerator, please do not incline it more than 45 degrees.

 Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight

may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient

temperatures may also cause the unit to perform improperly. The optimal ambient temperature range is 50°F –

109.4°F. Do not mount the draft tower remotely, as the exposed beer line will not be refrigerated, causing foam.

 Avoid locating the unit in damp areas.

 Unwind the power cord to its full length and inspect for damage before plugging into the outlet.

 Plug the refrigerator into an exclusive, properly installed and grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power

and/or electrical grounding should be directed to a certified electrician or authorized products service center.

 After plugging the appliance into a wall outlet, allow the unit to cool down for 3 to 4 hours before installing a

keg in the appliance.

Caster Installation

1. Remove everything from the cabinet and lay the unit on a clean, dry, and padded surface

2. Install casters into the holes on the bottom of the unit as shown and tighten with a wrench

3. The two casters equipped with locks should be installed on the front of the unit

4. Once all four casters are attached, return the beer dispenser to an upright position

5. Allow the unit to sit for 8-10 hours before plugging in to allow the refrigerant to settle

Guardrail Installation

1. Screw the guardrail lugs (1) into the top of the kegerator

2. Install the guardrail posts (2) on the guardrail lugs

3. Using the screws provided (3), fasten the guardrail posts onto the guardrail lugs

www.kegco.com 5 1-888-980-4810

Door Handle Installation

1. Remove the box containing the handle and screws from the kegerator.

2. Pull out a bit of the rubber gasket from the back side of the holes.

3. Insert the screws through the holes and connect with the handle.

Care and Maintenance

Cleaning your kegerator:

 Turn off the power, unplug the appliance, and remove all items including the dispense kit.

 Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2

tablespoons of baking soda to a quart of water.

 Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

 Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.

 Do not use steel wool or a steel brush on the stainless steel. These will contaminate the stainless steel with steel

particles and rusting may occur.

 Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.

 It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.

Moving your kegerator:

 The provided casters will allow you to roll the appliance from one location to another in your home easily.

 For transportation, remove the keg, the dispense kit and any other items you may have inside the unit.

 Securely tape down all loose items inside your appliance and tape the door shut.

 Be sure the appliance stays secure in the upright position during transportation.

 Protect the outside of the appliance with a blanket or similar item.

Energy Saving Tips

 Place the unit in the coolest area of the room, away from heat-producing appliances and out of direct sunlight

 Let heated items and beverages cool to room temperature before placing them into the appliance

 Do not overload the beer dispenser as it forces the compressor to run longer

 Wrap items properly and wipe containers dry before placing them in the unit to cut down on frost build-up

 Do not line shelves with aluminum foil, wax paper, or paper towels, as liners can interfere with cold air

circulation, reducing cooling efficiency

 Position items so that air can circulate freely around them

 Do not leave door open for longer than required

 Make sure items do not touch the back of the storage compartment

 Do not set the thermostat to exceedingly cold temperatures

www.kegco.com 6 1-888-980-4810

Operation Instructions

The Kegco Kegerator is able to maintain the proper dispensing temperature for beer, provided it is installed correctly in

the proper environment. For best results, mount the draft tower as close to the top of the kegerator as possible and

seal any openings to prevent heat transfer. Avoid opening and closing the door of the kegerator too often to ensure a

consistent temperature inside the unit. Beer is dispensed best between 32-38 degrees Fahrenheit (factory preset

temperature is 32 degrees Fahrenheit). If it is kept below or above that range, you may experience foam issues.

The kegerator should be placed in an area where the ambient temperature range is between 50-109.4 degrees

Fahrenheit (10-43 degrees Celsius). If the ambient temperature is above or below this range, the performance of the

unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures

to fluctuate. Please be aware that the desired temperatures may fluctuate depending on the ambient temperature and

the orientation of the keg.

Your Kegco Kegerator includes an operating panel on the front of the unit. The operating panel includes several features

to operate and control the temperature of the kegerator, including:

To turn the appliance ON or OFF, press and hold the POWER key for 5 seconds

Press to view the set temperature; if no other operations are performed for 6 seconds, the display will return to

displaying the actual temperature in the cooler

Press the SET key first and then the UP or DOWN button to increase (warm) or decrease (cool) the set

temperature by 1 degree increments

Press and and hold for 6 seconds to change the display from Fahrenheit to Celsius or Celsius to Fahrenheit

Press and hold for 6 seconds to manually defrost the unit; press and hold again to stop defrosting

Press to manually turn the interior light on or off

If you are going on vacation, you may leave the kegerator operating during vacations of less than three weeks. If the

appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the

interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.

NOTE: Keep a thermometer handy and adjust temperature control settings as necessary according to your needs.

www.kegco.com 7 1-888-980-4810

Troubleshooting

There are many common issues you may experience with your kegerator that can be solved very easily, without the

need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:

PROBLEM

POSSIBLE CAUSE

Kegerator does not operate

Not plugged in or the appliance is turned off

The circuit breaker tripped or a fuse has blown out

Kegerator is not cold enough

Check the temperature control setting

External environment may require a higher setting

The door is opened too often

The door is not closed completely

The door gasket is not sealing properly

Kegerator is turning on and off frequently

The room temperature is hotter than normal.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work

Not plugged in.

The circuit breaker tripped or a fuse has blown.

The light bulb has burned out.

The light button is “OFF”.

Vibrations

Check to assure that the kegerator is on a level surface.

The kegerator seems to make too much noise

A faint humming noise may come from the flow of the

refrigerant, which is normal.

As each cycle ends, you may hear gurgling sounds caused by

the flow of refrigerant in your kegerator.

Contraction and expansion of the inside walls may cause

popping and crackling noises.

During the defrosting process you may hear a water flowing

sound caused by water flowing into the drain trough.

The kegerator is not on a level surface.

The door will not close properly

The kegerator is not on a level surface.

The gasket is dirty.

The shelves are out of position.

Smell/odor

Check for spills and for food or drink that is out of date or

incorrectly packaged

Outer surface of appliance is wet

Condensation has formed and can be wiped dry

External surface is warm

Compressor is working to transfer heat from inside the

cabinet

www.kegco.com 8 1-888-980-4810

Technical Specifications

Keg Capacity

One Full-Size Keg or Two Quarter Slim Kegs or Three 5

Gallon Commercial Kegs or Three 5 Gallon Cornelius

Home Brew Kegs

Dimensions

34-1/8" H x 24" W x 25" D (without Handle)

Cubic Footage

6.6 Cubic Feet

Weight

115 lbs. (empty)

Voltage / Frequency

110v / 60 Hz

Running Amps

1.0 A

Wattage

85W

Refrigerant

R600a

Operating Temperature

23°F - 59°F

Ambient Temperature

50°F – 109.4°F

www.kegco.com 9 1-888-980-4810

www.kegco.com 10 1-888-980-4810

www.kegco.com 11 1-888-980-4810

www.kegco.com 12 1-888-980-4810

Warranty Information

WHAT IS COVERED LIMITED ONE-YEAR WARRANTY:

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the

unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide

all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated

in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement

product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco

Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement

compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or

commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the

servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

WHAT IS NOT COVERED:

 Content losses of food or other, due to spoilage.

 Incidental or consequential damages.

 Parts and labor costs for the following will not be considered as warranty:

o Door springs, and/or frames.

o Inner door panels, door rails and/or door supports.

o Light bulbs and/or plastic housing.

o Plastic cabinet liners.

o Punctured evaporator that voids the warranty on the complete sealed system.

o Repairs performed by unauthorized servicers.

o Shipping and handling costs associated with the replacement of the unit.

o Service calls that do not involve defects in material or workmanship such as customer education, door

reversal, or proper installation.

o Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip

charges, or mileage expense for service call to remote areas, including the State of Alaska.

o Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power,

accidents, fire, floods, or acts of God.

o Replacement of house fuses or resetting circuit breakers.

 Failure of the product if it is used for other than its intended purpose.

 This warranty does not apply outside the Continental USA.

SERVICE FOR YOUR KEGERATOR:

With the purchase of your Kegco appliance, you can have the confidence that if you ever need additional information or

assistance, the Kegco Customer Service team will be here for you. Whatever your questions are about our products, help

is available. Just call us toll-free.

KEGCO PRODUCT CUSTOMER SERVICES:

Product Information, Part Orders and In-Home Repair Service: 888-980-4810

Kegco HK38SSC-1 User manual

Brand: Kegco

Model: HK38SSC-1

Category: Drink coolers

Type: User manual

This manual is also suitable for

Download PDF

report

Kegco HK38SSC-1 User manual

This manual is also suitable for

Kegco HK38SSC-1 User manual

Related papers

Other documents