Zephyr PRKRAIL-0124SS Presrv Kegerator Drink Guardrail User manual

ZEPHYRONLINE.COM PRKRAIL-0124SS Presrv Kegerator Drink Guardrail

For use with Zephyr models PRKB24C01AG and PRKB24C01AS-OD

Using the 3mm Allen wrench included with the

kegerator, remove (4) M5*10 screws from

the top of the kegerator.

Install (4) threaded posts from the Drink

Guardrail hardware package into the screw

holes on top of the kegerator.

Assemble the two Drink Guardrail sections

together and place over the (4) threaded posts.

Secure the Drink Guardrail in place with (4)

φ9*22-M5 screws included in the hardware package

and tighten them using the Philip Screwdriver.