Conair BAB2095MU User manual

Category
Hair straighteners
Type
User manual

This manual is also suitable for

Model: BAB2095U/BAB2095MU
User gUide
6417 BaByliss Pro Staightener Cover 130x170.indd 1 16/12/09 15:56:17
SWIFT STRAIGHTENER
Features:
• 230°C high heat
• Advanced Floating Ceramics with Nano Titanium Technology
• Ultra fast heat up
• 10 variable temperature settings 140°C - 230°C
• Digital temperature control
• Temperature memory function
• Automatic switch off after 72 minutes
• On/off switch
• Salon length swivel cord
• Available in Black and Hot Pink
140°C 160°C 190°C 210°C 230°C
230°
220°
210°
200°
190°
180°
170°
160°
150°
140°
Fragile
Very Fine
Hair
Thin Easy
to Curl
Hair
Normal Textured
Hair
Wavy Curly
Hair
Coarse Very
Thick Hair
INSTRUCTIONS FOR USE
Plug the appliance into a suitable mains socket and push the on/off
(0/I) button once to switch unit on.
The temperature will heat up to 180˚C in seconds. You will be able to
view the temperature on the digital display on the outer casing.
Use the temperature buttons (+/-) to select the desired temperature,
the temperatures will increase or decrease in 10°C increments for
specic temperature control (between 140°C to 230°C).
The display will ash 3 times to conrm the temperature has
been selected. The display will show the exact temperature when
heating up.
After use, push the on/off (0/I) button once to switch unit off and
unplug the appliance.
• Allow to cool before storing away.
Temperature Memory Function:
The temperature memory function is suitable when a prefered tempe-
rature is required for each use by pushing the (M) button.
To programme your desired temperature, ensure the unit is
switched on, then simply select the temperature you require by using
the temperature buttons (+/-) and by viewing the digital display.
Hold down the (M) memory button for 3 seconds, the display will
ash 3 times to conrm the temperature has been stored. This will
be stored in the straighteners memory from that point and after being
switched off.
When you switch the unit back on for next use, simply push the (M)
memory button and your stored temperature will be automatically
selected.
To reset the stored temperature, simply select a different temperature
(ie. 230°C) and hold down the memory button for 3 seconds and the
new temperature will then be stored.
Safety Automatic switch off:
This straightener features a safety automatic switch off after 72
minutes. To use the straightener again simply push the on/off (0/I)
button to switch the unit back on. If the unit is no longer required for
use please ensure you unplug the appliance from the mains outlet.
FOR STRAIGHTENING
• Separate a section of hair.
Place the section of hair between the straightening plates, close to
the roots.
Hold the hair rmly between the straightening plates and slide down
the length of the hair, from root to tip.
• Repeat as necessary.
• Allow the hair to cool before combing through.
After use, press the button marked to switch off and unplug the
appliance.
CREATING CURLS
Separate a section of hair. The smaller the section the more dened
the curl. The larger the section the looser the curl or wave. For best
results the section should be no more than 3.5cm wide.
Take a section of hair and slide the straightener into the hair and
close the plates together.
Turn the straightener through 180º so that the hair is wrapped once
around the outside of the straightener.
• Slowly glide the straightener along the length of the hair from root to
tip in a downward motion.
NB: Don’t close the straighteners too tightly when curling, you don’t
want to pull or drag the hair.
• Release the straightener from the hair.
To ensure the curl sits neatly into place, hold the end of the section
you have just curled and turn through 180° in the direction of the curl.
• Repeat as necessary.
SAFETY CAUTIONS
• Please retain these instructions for future reference.
Do not use the appliance in the bathroom.
Do not use the appliance near basins or other vessels containing liquids.
Do not immerse the appliance in water or other liquids.
This appliance should only be used as described within this
instruction booklet.
Always inspect the appliance before use for noticeable signs of
damage. Do not use if damaged, or if the appliance has been
dropped. In the event of damage, contact the Conair Customer Care
Line (refer to “UK After Sales Service” section for further information).
Do not use the appliance if the cord is damaged. In the event of
damage, discontinue use immediately. If the cord is damaged it must
be replaced by the manufacturer. Return the appliance to the Conair
Service Centre (refer to “UK After Sales Service” section for further
information).
Do not leave the appliance unattended when switched on or plugged in.
Do not place the appliance on any heat sensitive surface whilst in
operation.
Take care to avoid the hot surfaces of the appliance coming into
direct contact with the skin, in particular the ears, eyes, face and neck.
This appliance should not be used by adults or children whose
lack of experience, product knowledge or disability might cause a
hazard, unless they have been correctly instructed and are adequately
supervised.
Children should always be supervised to ensure that they do not play
with this product.
Allow appliance to cool before storing away.
After use, do not coil the cord around the appliance as this may
cause damage. Instead, coil loosely by the side of the appliance.
This appliance complies with the requirements of Directives 04/108/
EEC (Electromagnetic Compatibility) and 06/95/EEC (Electrical
Safety of Domestic Appliances) amended by Directive 93/68/EEC (CE
Marking).
The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it should
be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about the recycling of this
product, please contact your local council ofce or your household waste
disposal service.
CLEANING & MAINTENANCE
The appliance may require cleaning due to a build up of residue from
hair products.
To clean
Ensure the appliance is switched off, unplugged and cool
Using a damp cloth and mild detergent or soap, wipe the appliance.
Ensure the appliance has dried thoroughly before re-using.
IMPORTANT: Do not immerse the appliance in water or other liquids.
UK GUARANTEE
This BaByliss PRO appliance is guaranteed for salon use for 6
months. This guarantee covers defects under normal use from date of
purchase and ceases to be valid in the event of alteration or repair by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture, it will be repaired or replaced
through the Conair UK After Sales Service. Conair reserve the right to
amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.
UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or
e-mail your enquiry to ukinfo@conair.com
In Guarantee
Return the product to the Conair Service Centre at the following
address:
Conair Service Centre
PO Box 506
WIGAN
WN1 9AA
Enclose your name and address, together with proof of purchase and
details of the fault.
Conair will either repair or replace the product as appropriate.
Out of Guarantee
Contact the Conair Customer Care Line on 0870 5 133191 (09:00 to
17:00 Monday to Friday) or e-mail your enquiry to ukinfo@conair.com
for details of the standard repair or replacement charge. If you wish
to proceed with the repair or replacement, return the product to the
Conair Service Centre at the following address:
Conair Service Centre
PO Box 506
WIGAN
WN1 9AA
Enclose your name and address, together with details of the fault and
cheque made payable to The Conair Group Ltd.
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured red.
Neither core should be connected to the earth terminal of a three pin
plug marked with the letter E or is coloured green or yellow.
With this appliance, if a 13 amp plug is used a 5 amp fuse should be
tted. If any other type of plug is used, a 5 amp fuse must be tted
either in the plug or at the distribution board.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Conair BAB2095MU User manual

Category
Hair straighteners
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI