
any queries regarding product safety and compliance,
please contact the Conair Customer Care Line. (See
‘UK After Sales Service’ section for further information).
SWITCH ACTIVATION CONTROL
IMPORTANT! This appliance features delayed activation control.
Immediately after turning the appliance on you are able to adjust the
temperature settings. After 5 seconds of the appliance being turned
on, the temperature buttons will automatically lock. To adjust the heat
settings, hold down the ‘+/-’ or the 'PROTECT' button for 1-2 seconds,
this will deactivate the lock mode and allow the settings to be changed.
To turn off the appliance whilst in lock mode, hold down the button
marked ‘ ’ for 1-2 second until the unit switches off.
INSTRUCTIONS FOR USE
• Ensure hair is dry and combed through to remove any tangles. Divide
the hair into sections ready for styling.
• Press and hold the button marked ‘ ’ for 1-2 seconds to turn the
appliance on. The appliance will automatically start heating up.
• Press the ‘+’ and ‘-‘ buttons to select a heat setting suitable for
your hair type. The number on the digital display will ash until the
selected temperature has been reached. Once the temperature has
been reached, the number on the digital display will remain solid.
• Select the 'PROTECT' button to activate protect mode for enhanced
heat protection. (See Sensor Protect™ Technology).
• Place a section of hair between the straightening plates, close to the
roots.
• Hold the hair rmly between the straightening plates and slide down
the length of the hair, from root to tip in one smooth movement.
• Repeat for each section of hair.
• Allow the hair to cool before combing through.
• After use, press and hold the ‘ ’ button for 1-2 seconds to switch off
and unplug the appliance.
• Allow the appliance to cool before storing away.