Package Content:

SCOPIA XT1000 Codec Unit•

SCOPIA XT1000 Standard Camera•

SCOPIA XT1000 Digital Microphone Array Pod•

SCOPIA XT1000 Remote Control Unit•

Codec Unit Camera Cable•

HDMI Cable•

Digital Microphone Array Pod Cable•

Ethernet Cable for LAN•

SCOPIA XT1000 Quick Setup Guide

© 2010 RADVISION Ltd. All intellectual property rights in this publication are owned by RADVISION Ltd. and are protected by United States copyright laws, other applicable copyright laws and international treaty provisions. RADVISION Ltd. retains all rights not expressly granted.

This publication is RADVISION confidential. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by RADVISION Ltd. No representation of warranties for fitness for any purpose other than what

is specifically mentioned in this guide is made either by RADVISION Ltd. or its agents. RADVISION Ltd. reserves the right to revise this publication and make changes without obligation to notify any person of such revisions or changes. RADVISION Ltd. may make improvements or

changes in the product(s) and/or the program(s) described in this documentation at any time. If there is any software on removable media described in this publication, it is furnished under a license agreement included with the product as a separate document. If you are unable to

locate a copy, please contact RADVISION Ltd. and a copy will be provided to you. Unless otherwise indicated, RADVISION registered trademarks are registered in the United States and other territories. All registered trademarks recognized. All right reserved.

For further information contact RADVISION or your local distributor or reseller. http://www.radvision.com

Date and Time Setup

Use the up and down arrow keys 1.

to navigate to the Day field.

Month, Year, Hour, and Minutes.

Then select Next.

Network Settings

Enter your network settings. For

questions about this information,

consult your system administrator.

Then select Finish.

System Installation and Activation

Connect all cables to the SCOPIA XT1000 Codec Unit (see overleaf).1.

Turn on the TV monitors. 2.

Interface

Select the Country and preferred

Language. Then select Next.

C

Codec Unit Display Name

The 1. System Name field displays

the name of this Codec Unit as

displayed in a video conference,

for example:

Use the remote control keypad to 2.

Moving the Camera

On the general screen, navigate 1.

to Cameras using the arrow keys.

a second camera installed.

Graphics and Image Setup

If all the sides of the orange frame

are visible on your monitor, select

Yes, otherwise select No.

Select 1. OK. The first slider is

highlighted in orange.

Use the right and left arrow keys 2.

to move the slider until the Top

orange frame is fully visible on

G H

Open the envelope that came with the XT1000.1.

Locate the serial number and product key.2.

On a computer, open a browser and navigate to 3.

http://www.radvision.com/XT1000.

Complete the online registration form and enter the serial number and product 4.

key. The web registration form returns a license key.

Write down the license key and keep it in a safe place for future use.5.

located near the

device for the power

supply connection.

Never remove the

mains plug while the

device is connected.