Palm M125 Owner's manual

Handbook

for

Palm™ m100 Series Handhelds

Page ii Handbook for Palm™ m100 Series Handhelds

Copyright

PalmModem and Palm OS are registered trademarks, and the HotSync logo, Palm, and

the Palm logo are trademarks of Palm, Inc. Other product and brand names may be

trademarks or registered trademarks of their respective owners.

Disclaimer and Limitation of Liability

Palm, Inc. and its subsidiaries assume no responsibility for any damage or loss resulting

from the use of this handbook.

Palm, Inc. and its subsidiaries assume no responsibility for any loss or claims by third

parties which may arise through the use of this software. Palm, Inc. and its subsidiaries

assume no responsibility for any damage or loss caused by deletion of data as a result

of malfunction, dead battery, or repairs. Be sure to make backup copies of all important

data on other media to protect against data loss.

Important: Please read the End User Software License Agreement with this product

before using the accompanying software program(s). Using any part of the software

indicates that you accept the terms of the End User Software License Agreement.

HotSync® Cradle and Adapters and

Software Download Available

The HotSync® cradle/cable supplied with your handheld fits a USB connector. If you

do not have a USB port available on your computer, you can order a 9-pin serial cradle

and the following types of adapters: 25-pin serial adapter (for use with Windows

computers), or a Macintosh serial adapter. To order a HotSync cradle or adapters, go to

the web site: http://www.palm.com.

Palm™ Desktop software is supplied on a CD-ROM disc. If you do not have access to a

CD-ROM drive for your computer, you can download the Palm Desktop software from

http://www.palm.com.

P/N: 406-3352A-US

Contents Page iii

Contents

About This Book ................................................................. 1

Chapter 1: Introduction to Your Handheld ......................... 3

Getting to know your Palm m100 series handheld ......................... 3

What is a Palm m100 series handheld?.......................................... 3

System requirements ........................................................................ 4

Palm m100 series components ........................................................ 5

Upgrading from another Palm OS handheld................................... 8

Preparing to use your handheld ........................................................ 8

Using the protective flip cover ........................................................ 9

Changing the face plate .................................................................. 10

Installing the batteries .................................................................... 11

Palm Desktop software .................................................................. 12

Using your handheld with another PIM ..................................... 16

Tapping and typing ........................................................................... 16

Tap with the stylus to get things done......................................... 16

Elements of the handheld interface .............................................. 17

Opening applications ..................................................................... 19

Using menus .................................................................................... 20

Entering data.................................................................................... 22

Customizing your handheld............................................................. 26

Chapter 2: Entering Data in Your Handheld ..................... 29

Using Graffiti writing to enter data ................................................. 29

Writing Graffiti characters ............................................................. 29

Graffiti tips ....................................................................................... 31

The Graffiti alphabet....................................................................... 32

Writing capital letters ..................................................................... 33

Writing numbers ............................................................................. 33

Graffiti numbers .............................................................................. 34

Writing punctuation marks ........................................................... 34

Additional Graffiti punctuation.................................................... 35

Writing symbols and extended characters .................................. 35

Writing accented characters .......................................................... 35

Accent strokes.................................................................................. 36

Page iv Handbook for Palm™ m100 Series Handhelds

Additional non-English characters ...............................................36

Navigation strokes...........................................................................36

Graffiti ShortCuts ............................................................................37

Using the onscreen keyboard............................................................38

Using Note Pad ...................................................................................38

Using your computer keyboard........................................................39

Importing data.....................................................................................39

Importing data from a Windows computer ................................39

Importing data from a Macintosh .................................................40

Chapter 3: Managing Your Applications........................... 43

Using the Applications Launcher.....................................................43

Selecting applications......................................................................43

Switching between applications....................................................43

Categorizing applications...............................................................43

Changing the Applications Launcher display.............................44

Choosing preferences .........................................................................45

Installing and removing applications ..............................................46

Installing add-on applications .......................................................46

Removing applications ...................................................................50

Removing Palm Desktop software................................................51

Security.................................................................................................52

Assigning a password.....................................................................52

Changing or deleting a password .................................................53

Locking your handheld ..................................................................54

Recovering from a forgotten password........................................57

Chapter 4: Using Expansion Features ............................... 59

Inserting an expansion card ..............................................................59

Removing an expansion card............................................................60

Opening expansion card applications .............................................60

Switching between your handheld and an expansion card .........61

Copying applications to an expansion card....................................61

Deleting applications from an expansion card...............................62

Card Info ..............................................................................................63

Reviewing card information ..........................................................63

Renaming a card ..............................................................................64

Formatting a card ............................................................................64

Card Info menus ..............................................................................64

Contents Page v

Chapter 5: Using Your Basic Applications ....................... 67

Overview of basic applications ........................................................ 67

Date Book ......................................................................................... 67

Address Book................................................................................... 68

To Do List ......................................................................................... 69

Note Pad ........................................................................................... 70

Memo Pad ........................................................................................ 71

Calculator ......................................................................................... 71

Clock ................................................................................................. 72

Common tasks .................................................................................... 72

Creating records .............................................................................. 72

Editing records ................................................................................ 73

Deleting records .............................................................................. 75

Purging records ............................................................................... 76

Exchanging and updating data: HotSync operations................ 77

Beaming information ...................................................................... 82

Categorizing records ...................................................................... 84

Finding information........................................................................ 88

Sorting lists of records .................................................................... 91

Making records private .................................................................. 93

Attaching notes................................................................................ 96

Choosing fonts................................................................................. 96

Reviewing Reminders .................................................................... 98

Application-specific tasks ................................................................. 99

Date Book ......................................................................................... 99

Address Book................................................................................. 113

To Do List ....................................................................................... 119

Note Pad ......................................................................................... 124

Memo Pad ...................................................................................... 128

Calculator ....................................................................................... 130

Clock ............................................................................................... 132

Chapter 6: Advanced HotSync® Operations................... 135

Selecting HotSync setup options.................................................... 135

Customizing HotSync application settings .................................. 141

IR HotSync operations ..................................................................... 143

Preparing your computer for infrared communication .......... 144

Configuring HotSync Manager for infrared communication. 144

Performing an IR HotSync operation......................................... 146

Returning to cradle/cable HotSync operations........................ 147

Conducting a HotSync operation via modem.............................. 148

Preparing your computer ............................................................ 148

Preparing your handheld............................................................. 151

Page vi Handbook for Palm™ m100 Series Handhelds

Selecting the conduits for a modem HotSync operation .........152

Performing a HotSync operation via a modem.........................153

Using File Link ..................................................................................153

Creating a user profile......................................................................153

Chapter 7: Setting Preferences for Your Handheld ........ 157

Viewing preferences.........................................................................157

Buttons preferences ..........................................................................158

Pen preferences ..............................................................................159

HotSync buttons preferences .......................................................160

Digitizer preferences ........................................................................161

Formats preferences .........................................................................161

Country default..............................................................................161

Time, date, week start, and numbers formats...........................162

General preferences ..........................................................................162

Auto-off delay ................................................................................162

System, alarm, and game sounds................................................163

Beam Receive..................................................................................163

Date and Time preferences..............................................................164

Connection preferences....................................................................164

Editing connections .......................................................................165

Network preferences and TCP/IP software .................................166

Selecting a service..........................................................................167

Entering a user name ....................................................................167

Entering a password .....................................................................168

Selecting a connection...................................................................168

Adding telephone settings ...........................................................169

Connecting to your service...........................................................171

Creating additional service templates........................................172

Adding detailed information to a service template..................172

Login scripts ...................................................................................175

Creating a login script on your handheld..................................176

Plug-in applications ......................................................................178

Deleting a service template ..........................................................178

Network preferences menu commands .....................................178

TCP/IP troubleshooting ...............................................................179

Owner preferences............................................................................180

ShortCuts preferences ......................................................................181

Creating a ShortCut.......................................................................181

Editing a ShortCut.........................................................................182

Deleting a ShortCut.......................................................................182

Contents Page vii

Appendix A: Maintaining Your Handheld ....................... 183

Caring for your handheld ............................................................... 183

Battery considerations ..................................................................... 184

Resetting your handheld ................................................................. 185

Performing a soft reset ................................................................. 185

Performing a hard reset................................................................ 186

Appendix B: Frequently Asked Questions ...................... 191

Software installation problems....................................................... 192

Operating problems ......................................................................... 193

Tapping and writing problems ...................................................... 195

Application problems ...................................................................... 196

HotSync problems ............................................................................ 197

Beaming problems............................................................................ 205

Password problems.......................................................................... 206

Technical support ............................................................................. 207

Appendix C: Non-ASCII Characters for Login Scripts .... 209

Use of ^char ...................................................................................... 209

Carriage return and line feed ......................................................... 209

Literal characters .............................................................................. 209

Product Regulatory Information...................................... 211

Index ................................................................................ 215

Page viii Handbook for Palm™ m100 Series Handhelds

About This Book Page 1

About This Book

Welcome to the Palm™ m100 series handheld. This handbook is

designed to help you get up and running quickly on your handheld.

It describes all you need to know about how to use your handheld and

the applications that come with it.

It walks you through:

■Locating all the parts of your handheld

■Viewing and entering data

■Working with expansion cards

■Using your handheld with your computer

■Personalizing your handheld with your own preference settings

After you become familiar with the basic functionality of your

handheld, you can use the rest of this handbook as a reference for less

common tasks, for maintaining your handheld, and also as a source of

information if you have problems operating it.

Page 2 About This Book

Chapter 1 Page 3

Chapter 1

Introduction to Your

Handheld

This chapter explains the physical buttons and controls on your

Palm™ m100 series handheld, how to use your handheld for the first

time, how to add expansion cards to your handheld, and how to use

HotSync® technology to synchronize your handheld and Palm™

Desktop software.

Getting to know your Palm m100 series

handheld

What is a Palm m100 series handheld?

Palm m100 series handhelds will help you stay organized and on time,

and keep up with daily tasks while you are away from your desk. Use

your new handheld to do the following:

■Enter your schedule in Date Book

■Keep all your contact names, addresses, and phone numbers in

Address Book

■Prioritize and assign your tasks a due date in To Do List

■Jot quick notes directly on the screen in Note Pad

■Set alarms from Clock, Date Book, and Note Pad, to keep yourself

on schedule and remind yourself of appointments and notes

■Synchronize your data with Palm Desktop software on your

Windows or Macintosh computer so you always have a copy

■Insert MultiMediaCard (MMC) or Secure Digital (SD) cards to add

additional software or memory, or to back up your data

■Attach and use peripheral hardware devices, such as a modem

■Beam information to another Palm OS® handheld that is close by

and has an IR (infrared) port

Page 4 Introduction to Your Handheld

System requirements

To install and operate Palm Desktop software, your computer system

must meet the following requirements:

Minimum requirements: Windows

■IBM-compatible Pentium-class computer

■Windows 98/Me/2000 (Windows 95/NT operating systems

require a serial cradle/cable, sold separately)

■16 MB RAM (64 MB recommended with Windows 2000)

■30 MB available hard disk space

■VGA monitor or better (the Quick Tour requires 256-color video

display; for best results, use High Color:16 bit)

■CD-ROM drive (you can also download the Palm Desktop

software from http://www.palm.com)

■Mouse

■One USB port or available serial port (serial cradle/cable sold

separately)

Minimum requirements: Macintosh

■Apple Macintosh or compatible with a Power PC processor

■Mac OS 8.5.1 to 9

■One USB port or available serial port (serial cradle/cable and

adapters sold separately)

■25 MB available hard disk space

■6 MB free RAM

Optional equipment

■Modem (such as an add-on modem accessory)

■Printer (compatible with your computer and its operating system)

■Infrared communication device

■MultiMediaCard (MMC) or Secure Digital (SD) expansion cards

(sold separately)

■HotSync cable, which enables you to perform HotSync operations

without your cradle (sold separately, available with either a USB or

serial connector)

Chapter 1 Page 5

Palm m100 series components

Locating front panel controls

Power

button/

Backlight

control

Turns your handheld on or off and controls the

backlight feature. If your handheld is turned off,

pressing the power button turns the unit on and

returns you to the last screen you viewed.

If your handheld is turned on, pressing the power

button turns the unit off. Pressing the power button

for about two seconds turns the backlight on or off.

Screen Displays the applications and information stored in

your handheld. It is touch-sensitive and responds to

the stylus.

Graffiti®

writing area

The area where you write letters and numbers using

the Graffiti® alphabet. See Chapter 2 to learn how to

write Graffiti characters.

Screen

Graffiti

writing area

Application buttons

Scroll buttons/

Clock control

Power button/

Backlight control

Changeable

face plate

Page 6 Introduction to Your Handheld

Using the backlight

If lighting conditions make it difficult for you to see the information

on your handheld, you can use the backlight to illuminate your screen.

To activate the backlight:

■Press the power button and hold it down for about two seconds.

Release the button when the backlight turns on.

Tip: In addition, you can assign the full-screen pen stroke to activate

the backlight. See “Pen preferences” in Chapter 7 for details.

To turn off the backlight:

■Press and hold the power button for about two seconds. The

backlight also turns off automatically (after a period of inactivity)

with the Auto-off feature. See “Auto-off delay” in Chapter 7 for

more information.

Application

buttons

Activates the individual handheld applications that

correspond to the icons on the buttons: Date Book,

Address Book, To Do List, and Note Pad. If your

handheld is turned off, pressing any application

button activates the handheld and opens the

corresponding application. This is the fastest way to

open an application.

Tip: See “Buttons preferences” in Chapter 7 for

details on reassigning these buttons to

activate any application on your handheld.

Scroll

buttons/

Clock

control

Displays text and other information that extends

beyond the handheld screen area.

When your handheld is on, pressing the lower

button scrolls down to view information below the

viewing area, and pressing the upper button scrolls

up to view information above the viewing area.

When your handheld is off, pressing the top button

displays the time. Holding down the top button for a

few seconds turns on the backlight so you can see the

time if lighting conditions are poor.

Changeable

face plate

Protects your handheld and enables you to

personalize your handheld’s appearance.

Chapter 1 Page 7

Locating back panel components

Stylus Serves as a pointing and writing device for

navigating through applications and entering

data on your handheld. To use the stylus, slide it

out of the storage slot and hold it as you would a

pen or pencil.

Face plate tab Releases the face plate so you can personalize the

appearance of your handheld with another face

plate (sold separately).

IR port Uses infrared technology to transmit data to and

receive data from other Palm OS handhelds, and

to perform HotSync operations. See “Common

tasks” in Chapter 5 and “IR HotSync operations”

in Chapter 7 for more information.

Expansion card

slot

Accepts MultiMediaCard (MMC) or Secure

Digital (SD) expansion cards, enabling you to

add more memory or applications. You can also

back up data to an expansion card.

Battery door Secures the batteries that power your handheld.

Reset button Under normal use, you should not have to use

the reset button. See Appendix A for information

about when and how to use the reset button.

Reset button

Universal

connector

Stylus

Battery door

IR port

Face plate tab

Expansion

card slot

Page 8 Introduction to Your Handheld

Upgrading from another Palm OS

handheld

If you already own a Palm OS handheld, you must install the version

of Palm Desktop software that comes with your new handheld. To

upgrade quickly and easily, perform the tasks described in the

following sections. Some tasks are specifically for upgrading.

Preparing to use your handheld

Before you begin using your handheld and Palm Desktop software,

you must complete a few easy installation tasks.

To use your handheld and Palm Desktop software, complete the

following:

■(If upgrading) Perform a HotSync operation using your old

handheld and cradle/cable. This ensures all data on your

handheld is on your desktop computer.

■Connect the HotSync cradle/cable that comes with your Palm

m100 series handheld to your computer. See “Connecting the

HotSync cradle/cable” later in this chapter for details.

■(If upgrading) You may want to create a copy of your old Palm

Desktop software folder and its contents before installing your

new Palm Desktop software. If you do this, rename the copied

folder (for example, Palm Old), and store it outside the Palm

Desktop software folder. This step is optional.

■Install the Palm Desktop software that comes with your Palm m100

series handheld. See “Installing Palm Desktop software” later in

this chapter for details.

Universal

connector

Connects your handheld to the cradle/cable,

which in turn connects to the back of your

computer. This allows you to update the

information between your handheld and

computer using HotSync technology.

The universal connector also connects peripheral

hardware devices, such as a modem, to your

handheld.

Chapter 1 Page 9

■Perform a HotSync operation. See “Exchanging and updating data:

HotSync operations” in Chapter 5 for details.

■(If upgrading) Rename your old handheld. To prevent unexpected

results during HotSync operations, each handheld must have a

unique name. We recommend that you perform a hard reset on

your old handheld. See “Performing a hard reset” in Appendix A

for details.

Using the protective flip cover

The flip cover protects your handheld screen when it is not in use. The

window in the cover enables you to quickly view the time and alarm

reminder messages when your handheld cover is closed. To view the

time, press the top scroll button which is accessible through the hole

at the bottom of the cover.

You can open the cover so that it rests on the back of your handheld,

or remove it altogether.

To remove the cover:

1. Open the cover and grasp the hinge with your thumb.

2. Gently rock the cover from one side to the other until the hinge

prongs release from the slots on the top edge of your handheld.

Page 10 Introduction to Your Handheld

To reattach the cover:

■Align the hinge prongs with the slots on the top edge of your

handheld, and then insert one prong at a time until the prongs lock

inside the slots.

Changing the face plate

You can personalize the appearance of your handheld by changing the

face plate. For information about face plate accessories, visit the web

site http://www.palm.com.

To remove the face plate:

1. Remove the flip cover.

2. Lift the face plate tab slightly to separate it from your handheld

and pull the existing face plate away from your handheld.

Face plate tab

Chapter 1 Page 11

To attach the face plate:

1. Align the bottom edge of the new face plate with the slot on the

bottom edge of your handheld.

2. Gently press the top of the face plate onto your handheld until it

clicks into position.

Installing the batteries

To use your handheld, you must install two AAA alkaline batteries.

The batteries fit behind the battery door on the back of the handheld.

See “Battery considerations” in Appendix A for more information.

To install the batteries:

1. Press the latch on the battery door and lift the battery door away

from your handheld.

1

2

Press tab to open

battery door

Page 12 Introduction to Your Handheld

2. Install the two AAA alkaline batteries supplied with your

handheld into the battery compartment.

Note: A diagram in the interior of the battery compartment

shows + and - ends of the batteries. When correctly

installed, the clips in the battery compartment secure the

batteries in place.

3. Insert the battery door back into place so that it is flush with the

back of your handheld and “clicks” into position.

Important: Do not force the battery door. When the batteries are

correctly installed, the battery door clips smoothly

into place. If you feel resistance when replacing the

door, make sure the door is aligned with the slots on

the back of your handheld, and that the batteries are

firmly seated in the battery compartment.

Palm Desktop software

Palm Desktop software extends many of the functions of your

handheld to your computer and serves to back up all your data.

Viewing and editing your data using Palm Desktop software is

optional. However, when you use it with your handheld and the built-

in HotSync technology, you can fully synchronize the information on

your handheld with the information on your computer.

It is a good idea to back up your data in case something happens to the

data on your handheld. Changes you make on your handheld or Palm

Desktop software appear in both places after you synchronize.

With Palm Desktop software, you can do the following:

■Work with your handheld applications on your computer. Palm

Desktop software duplicates the Date Book, Address Book, To Do

List, and Memo Pad applications on your handheld, so you can

view, enter, and modify any data stored on your handheld. (You

cannot modify Note Pad data in Palm Desktop software.)

■Back up the data stored on your handheld with HotSync

technology and synchronize the data on your Palm Desktop

software. Synchronization is a one-step procedure that ensures

your data is always safe and up-to-date. See “Exchanging and

updating data: HotSync operations” in Chapter 5 for more

information.

Page is loading ...

Palm M125 Owner's manual

This manual is also suitable for

Palm M125 Owner's manual

Related papers

Other documents