Features
•
Metal construction
•
Intended for use with Rite-Temp
®
or HiFlow
Rite-Temp
®
valves
•
Variety of handle style options
•
Available with 5-1/4″ (13.3 cm) diverter bath spout
with NPT or slip-fit connection
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.18.1/CSA B125.1
•
IAPMO/cUPC
•
ADA
PRESSURE-BALANCING BATH AND
SHOWER VALVE TRIM
K-T10276
ALSO K-T10277, K-10280, K-10281
Colors/Finishes
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-T10276-4 Shower only trim*, sculpted lever handle, showerhead ❑ CP ❑ Other ____
K-T10276-4A Shower only trim*, traditional lever handle, showerhead ❑ CP ❑ Other ____
K-T10277-4 Valve only trim*, sculpted lever handle ❑ CP ❑ Other ____
K-T10277-4A Valve only trim*, traditional lever handle ❑ CP ❑ Other ____
K-10280-4 Sculpted NPT diverter bath spout ❑ CP ❑ Other ____
K-10280-4A Traditional NPT diverter bath spout ❑ CP ❑ Other ____
K-10281-4 Sculpted slip-fit diverter bath spout ❑ CP ❑ Other ____
K-10281-4A Traditional slip-fit diverter bath spout ❑ CP ❑ Other ____
*Rite-Temp valve must be ordered to complete faucet.
Product Specification
Rite-Temp pressure-balancing single-control bath and shower faucet trim shall be of brass construction. Shower trim shall
include showerhead with arm and flange, and faceplate with handle. Valve only trim shall include faceplate with handle. Faucet
trim shall be K-_____-_____-_____ and Rite-Temp valve shall be K-304-_____-NA OR K-306-KS-NA HiFlow Rite-Temp valve.
FORTÉ
®
RITE-TEMP
®
Page 1 of 2
1018257-4-
G
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
kohler.com
Technical Information
Required Accessories
K-304-K Rite-Temp valve without stops, NPT connections OR ❑ NA
K-304-KS Rite-Temp valve with stops, NPT connections OR ❑ NA
K-306-KS HiFlow Rite-Temp valve with stops, NPT connections OR ❑ NA
K-304-KP Rite-Temp valve with PVC connections ❑ NA
Recommended Accessories
HiFlow Rite-Temp thin wall installation kit* 88526
* Required when using the K-306-KS valve in a fiberglass
or acrylic installation.
Optional Accessories
Forté deep roughing-in kit for Rite-Temp
valve (lever handles)
1025388
Installation Notes
WARNING: Risk of damage to the K-306-KS
valve assembly. When using the K-306-KS valve
in a fiberglass or acrylic installation, use the thin
wall installation kit (88526).
Install this product according to the installation guide.
Install Rite-Temp valve according to valve installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mounted spout, diverter, or
handshower is connected to the spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″ (45.7
cm) with single elbow between valve and wall-mount spout.
Sculpted
Sculpted
Traditional
72" (182.9 cm) –
78" (198.1 cm) to
Floor (Typical)
4" (10.2 cm)
2-7/8"
(7.3 cm)
3"
(7.6 cm)
10" (25.4 cm)
to Spout
(Bath Only)
48" (121.4 cm)
to Floor
(Shower Only)
Top of Bath
5-1/4" (13.3 cm)
5-1/4" (13.3 cm)
Traditional
5-1/4" (13.3 cm)
6"
(15.2 cm)
6"
(15.2 cm)
6-3/8"
(16.2 cm) D.
For slip-fit spout, tubing must
extend 2-1/8" (5.4 cm) Min;
3-1/2" (8.9 cm) Max beyond
finished wall.
For 1/2" NPT spout, pipe
must extend 4-1/2" (11.4 cm)
beyond finished wall.
1/2"-14 NPT
Product Diagram
FORTÉ
®
RITE-TEMP
®
FORTÉ
®
RITE-TEMP
®
PRESSURE-BALANCING BATH AND SHOWER VALVE TRIM
Page2of2
1018257-4-
G
/
