Features
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/-3°F during water pressure fluctuations.
•
Provides temperature regulation and automatic anti-scald
protection.
•
Single handle controls both on/off activation and temperature
setting.
•
Includes faceplate with ADA-compliant metal lever handle.
•
Includes 6" diverter bath spout with slip-fit connection.
•
Includes single-function 2.0 gpm (gallons per minute)
showerhead with Katalyst
®
air-induction technology.
•
Showerhead features MasterClean
™
sprayface for easy
cleaning.
•
Includes shower arm with flange.
•
Coordinates with Hint
™
bathroom sink faucets and bath faucets.
Material
•
Premium material construction with metal handle ensures
reliability and durability.
Codes/Standards
•
KOHLER finishes resist corrosion and tarnishing.
ASME A112.18.1/CSA B125.1
Installation
DOE - Energy Policy Act 1992
EPA WaterSense
®
•
Trim only; requires valve to complete installation (sold
separately).
KOHLER
®
Faucet Lifetime Limited
Warranty
Required Products/Accessories
K-8304/K-P8304 Series Rite-Temp® Valve & Cartridge Kits
See website for detailed warranty information.
or
K-8300/K-P8300 Series Rite-Temp® Valve Body Rough-ins
K-8305/K-P8305 Series Rite-Temp® Cartridges
Available Colors/Finishes
Optional Products/Accessories
K-10350 Deep Rough-In Kit For K-8305 Cartridges
K-10351 Test Cap For K-8300 Series Valve Bodies
1307346 Retro mixer cap for K-304 Rite-Temp valve
1362395 Retro mixer cap for K-2971 HiFlow Rite-Temp valve
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-9-2020 04:21 - US/CA/LM/MX
Pitch
™
Rite-Temp
®
2.0 gpm bath and shower trim
K-TS97074-4
6" (152 mm)
1-9/16"
(40 mm)
Ø 6-3/8"
(162 mm)
3-3/8"
(86 mm)
3-11/16"
(94 mm)
Slip-fit:
Extend 5/8" OD tube 5"
(127 mm) from finished wall.
1/2" NPT
Ø 2-1/2"
(64 mm)
Finished Wall
K-8300 Valve
Series
7-1/4"
(184 mm)
Typical
Ø 1-1/4"
(32 mm) Max
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
4-9/16"
(116 mm)
Notes
Technical Information
For use with automatic compensating valves rated
at 1.6 gal/min (6.1 l/min) or less.
All product dimensions are nominal.
NoDrain included:
Install this product according to the installation
instructions.
Showerhead/Body Spray:
2 gal/min (7.6 l/min)Rated maximum flow:
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
45 psi (3.1 bar)Pressure:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-9-2020 04:21 - US/CA/LM/MX
Pitch
™
Rite-Temp
®
2.0 gpm bath and shower trim
K-TS97074-4
/