2. Hilti
  3. QTG X-PT 5

Hilti QTG X-PT 5 User guide

  • Hello! I am an AI chatbot trained to assist you with the Hilti QTG X-PT 5 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
X-PT 5
Pole tool
This document is a summary of the original manual. You must read the detailed operating
instructions in full before operating the product.
Ignoring the warnings and instructions may lead to potentially fatal injury. The product has been
designed for professional use and may be operated, maintained and repaired only by suitably
trained or qualified personnel.
Overview of the product
A Pole tool (2.13 m)
B Pole tool (1.55 m)
@
Tool holder
;
Tubular section (0.91 m)
=
Tubular section (0.35 m)
%
Grip section (0.48 m)
Before operation, observe the instructions regarding protective equipment.
Printed: 19.09.2017 | Doc-Nr: PUB / 5374917 / 000 / 00
X-PT 5
Pole tool
Manufacturer's warranty
Hilti warrants that the tool supplied is free of faults in material and workmanship. This warranty is valid
so long as the tool is operated and handled correctly, cleaned and serviced in accordance with the
Hilti operating instructions and the technical system is maintained. This means that only genuine Hilti
consumables, components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or replacement of defective parts only over the entire
lifespan of the product. Parts requiring repair or replacement as a result of normal wear and tear are not
covered by this warranty.
Additional claims are excluded, unless stringent national regulations prohibit such exclusion. In particular,
Hilti accepts no liability for direct, indirect, incidental or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inability to use the product for any purpose. Implied
warranties of merchantability or fitness for a particular purpose are specifically excluded.
For repair or replacement, send the tool or appliance or related parts immediately upon discovery of the
fault to the address of the Hilti marketing organization responsible.
This constitutes Hilti’s entire obligation with regard to warranty and supersedes all prior or contempora-
neous comments and oral or written agreements concerning warranties.
Fitting the tool
Fit the tool.
Printed: 19.09.2017 | Doc-Nr: PUB / 5374917 / 000 / 00
/