Hilti X-PT 5 Operating instructions

Type
Operating instructions

Hilti X-PT 5 is a versatile pole tool designed to make fastening tasks easier and more efficient. It features a modular design that allows for customization of length and easy assembly, making it suitable for various applications. The tool holder securely accommodates different tools, while the grip section offers comfortable handling and can be rotated for optimal positioning. The X-PT 5 enables precise fastening at various heights, ensuring accurate and reliable results. Its robust construction ensures durability and longevity, making it an ideal choice for demanding tasks.

Hilti X-PT 5 is a versatile pole tool designed to make fastening tasks easier and more efficient. It features a modular design that allows for customization of length and easy assembly, making it suitable for various applications. The tool holder securely accommodates different tools, while the grip section offers comfortable handling and can be rotated for optimal positioning. The X-PT 5 enables precise fastening at various heights, ensuring accurate and reliable results. Its robust construction ensures durability and longevity, making it an ideal choice for demanding tasks.

X-PT 5
English
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
English 1
1 Overview of the items available
1.1 Technical description
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
2 English
Item Description Length Weight
A Pole tool 2.16 m (7 ft) 2.1 kg (4.63 lb)
B Pole tool 1.55 m (5 ft) 1.8 kg (3.97 lb)
1 Tool holder
Total length with DX 5 tool: ?
0.51 m (1 11/16 ft) 0.8 kg (1.76 lb)
2 Tubular section 0.93 m (3 ft) 0.7 kg (1.54 lb)
3 Tubular section 0.31 m (1 ft) 0.3 kg (0.66 lb)
4 Grip section 0.48 m (1 9/16 ft) 0.7 kg (1.54 lb)
1.2 Selection table
Item Part No. of parts in
version
1.52 m (5 ft)
No. of parts in
version
2.13 m (7 ft)
No. of parts in
version
3.05 m (10 ft)
No. of parts in
version
3.96 m (13 ft)
Tool holder 1 1 1 1
2 Tubular section 0.9144
m (3 ft)
1 2 3
3 Tubular section 0.348 m
(1 ft)
1
4 Grip section 1 1 1 1
1.3 Malfunctions and troubleshooting
Possible malfunction Remedy (after lowering the tool)
The tool doesn’t fire. Check that the tubular sections are screwed in as far as they
go.
The cartridges are not transported. Pull the cartridge strip through manually to the next cartridge.
2 Manufacturer's warranty
Hilti warrants that the tool supplied is free of faults in material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned and serviced in accordance with the Hilti operating
instructions and the technical system is maintained. This means that only genuine Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or replacement of defective parts only over the entire lifespan
of the product. Parts requiring repair or replacement as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent national regulations prohibit such exclusion. In particular,
Hilti accepts no liability for direct, indirect, incidental or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inability to use the product for any purpose. Implied
warranties of merchantability or fitness for a particular purpose are specifically excluded.
For repair or replacement, send the tool or appliance or related parts immediately upon discovery of the fault
to the address of the Hilti marketing organization responsible.
This constitutes Hilti’s entire obligation with regard to warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning warranties.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
English 3
3 Assembly
3.1 Assembling the tubular sections and tool holder
Screw the tubular sections and tool holder together, tightening the joints by hand only, without use of tools.
3.2 Assembling the tubular sections and grip section
Screw the tubular sections and grip section together.
3.3 Opening the retaining bar
Open the retaining bar by releasing the screw knob.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
4 English
3.4 Fitting the tool
Fit the tool.
3.5 Securing the tool
Secure the tool with the retaining bar and tighten the screw knob.
3.6 Position of the trigger lever
Note that the trigger lever must be positioned in front of the trigger.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
English 5
4 Operation
4.1 Loading and using the tool
The instructions contained in the operating instructions for the tool, concerning loading and use of the tool,
must be observed.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
6 English
4.2 Fastening accessories
Note
Never press the tool against the working surface at an angle. Always work at right angles to the
surface into which the fasteners are to be driven.
Hold the tool with the extension at right angles to the surface into which the fasteners are to be driven.
Press the nose of the tool against the surface.
Pull the trigger.
4.3 Grip section
The grip section can be rotated at any time to bring it into a comfortable working position.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
English 7
4.4 Reloading
Load the tool after lowering the pole tool.
4.5 Do not swing the tool down
Note
Do not swing the tool down while holding the pole at its lower end.
5 Disassembly
Disassemble the tool following the assembly steps in the reverse order.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
Hilti = registered trademark of Hilti Corp., Schaan
**
20160822
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Hilti X-PT 5 Operating instructions

Type
Operating instructions

Hilti X-PT 5 is a versatile pole tool designed to make fastening tasks easier and more efficient. It features a modular design that allows for customization of length and easy assembly, making it suitable for various applications. The tool holder securely accommodates different tools, while the grip section offers comfortable handling and can be rotated for optimal positioning. The X-PT 5 enables precise fastening at various heights, ensuring accurate and reliable results. Its robust construction ensures durability and longevity, making it an ideal choice for demanding tasks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI