H163
© 2008 AS America Inc.
NOTES:
0139.011 LEFT HAND OUTLET (SHOWN).
0138.014 RIGHT HAND OUTLET (REVERSE DIMENSIONS).
SHOWN WITH POP-UP C.D. & O.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED PIPING NOT INCLUDED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
To Be Specied:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
* See faucet section for additional models available
MACKENZIE™ 4-1/2'
RECESS BATH
ENAMELED STEEL
MACKENZIE™ 4-1/2' RECESS BATH
❏ 0138.014 Right hand outlet (Illustrated)
❏ 0139.011 Left hand outlet
Product Features:
• Acid resisting, enameled steel construction
• One-piece recess bath
• Integral apron
• End drain outlet
• Full slip-resistant pattern
• Straight tiling ange
• Fully-bonded support pad
Nominal Dimensions:
1372 x 762 x 381mm
(54" x 30" x 15")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Enameled Steel Plumbing
Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
Revised 2/08
OPTIONAL TO FINISHED FLOOR
(USUALLY BETWEEN 1651 mm (65)
& 1981 mm (78)
FINISHED
WALL
C/L OF
VALVES
305mm
(12)
64mm
(2-1/2)
C/L OF
SPOUT
102mm
(4)
25mm
(1)
381mm
(15)
ROUGH
FLOOR
114 mm
(4-1/2)
44 mm
(1-3/4)
38 mm
(1-1/2)
1-1/2 O.D. TAILPIECE
1-1/2 N.P.T.
THREADS
1372mm
(54)
19mm
(3/4)
19 mm
(3/4)
203 mm
(8)
C/L OF
SUPPLIES
C/L OF
DRAIN
22mm
(7/8)
762mm
(30)
19mm
(3/4)
PLUMBER NOTE –
PROVIDE SUITABLE SUPPORT AT THIS POINT
C/L OF
SHOWER ARM
SEE FITTING SPECS
FOR DIMENSION
104mm
(4-1/16)
51mm
(2)
378mm
(14-7/8)
FINISHED
WALL
229mmx305mm
(9x12) FLOOR
CUTOUT FOR
DRAIN
PAD