ViewSonic VS13835 User manual

ViewSonic

®

Model No. : VS13835

Pro9500

LCD Projector

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Podręcznik użytkownika

- Руководство пользователя

- 使用手册 (简体)

- 사용자 안내서

IMPORTANT: Please read this User Guide to obtain important

information on installing and using your product in a safe

manner, as well as registering your product for future service.

Warranty information contained in this User Guide will describe

your limited coverage from ViewSonic Corporation, which is

also found on our web site at http://www.viewsonic.com in

English, or in specic languages using the Regional selection

box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las

instrucciones en este manual”

iViewSonic Pro9500

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning:

You are cautioned that changes or modications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/

EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or

discarded batteries or accumulators as unsorted municipal waste, but use the return and

collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of

more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

This is a Class A product in European Union.

Warning: This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

iiViewSonic Pro9500

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth.

7.

Do not block any ventilation openings. Install the unit in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided

for your safety. If the provided plug does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs.

Convenience receptacles and the point where they exit from the unit. Be sure that the

power outlet is located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit

has been damaged in any way, such as: if the power-supply cord or plug is damaged,

if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or

moisture, or if the unit does not operate normally or has been dropped.

iiiViewSonic Pro9500

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in

electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum

concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr

6+

) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not

specically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic

ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more

lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing

up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ivViewSonic Pro9500

Copyright Information

®

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are

trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this material,

or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change

product specications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available,

please register your product on the Internet at: www.viewsonic.com. The ViewSonic

®

Wizard CD-ROM

also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

Pro9500

ViewSonic LCD Projector

VS13835

Pro9500_UG_ENG Rev. 1A 11-02-10

_______________________________

Personal Identication Number (PIN):

Product disposal at end of product life

The lamp in this product contains mercury which can be dangerous to you and the environment. Please

use care and dispose of in accordance with local, state or federal laws.

ViewSonic respects the environment and is committed to working and living green. Thank you for being

part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

1ViewSonic Pro9500

Projector

Pro9500

User's Manual (detailed)

Operating Guide

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.

• Mac

®

is a registered trademark of Apple Inc.

• Windows

®

, DirectDraw

®

and Direct3D

®

are registered trademarks of Microsoft Corporation

in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

•

HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights

in Japan, the United States of America and other countries and

areas.

• Blu-ray Disc is a trademark.

All other trademarks are the properties of their respective owners.

NOTICE This entry notices of fear of causing trouble.

2ViewSonic Pro9500

Contents

Introduction ..................................................................................... 6

Features .............................................................................................................. 6

Checking the contents of package

....................................................................... 6

Part names .......................................................................................................... 7

Setting up .........................................................................................8

Arrangement ....................................................................................................... 8

Connecting with your devices

............................................................................. 9

Connecting to a power supply

........................................................................... 18

Using the security bar and slot .......................................................................... 18

Remote control .............................................................................. 19

Installing the batteries ....................................................................................... 19

About the remote control signal ........................................................................ 19

Changing the frequency of remote control signal

..................................................................... 20

Using as a simple PC mouse & keyboard

...................................................................... 20

Power on/off ................................................................................... 21

Turning on the power ........................................................................................ 21

Turning off the power ........................................................................................ 21

Operating ....................................................................................... 22

Adjusting the volume ......................................................................................... 22

Temporarily muting the sound ........................................................................... 22

Selecting an input signal ................................................................................... 22

Searching an input signal .................................................................................. 24

Selecting an aspect ratio ................................................................................... 24

Adjusting the projector's elevator ...................................................................... 25

Adjusting the lens .............................................................................................. 26

Using the automatic adjustment feature

....................................................................... 27

Adjusting the position ........................................................................................ 27

Correcting the distortion

..................................................................................... 28

Using the magnify feature ................................................................................. 29

Temporarily freezing the screen ........................................................................ 31

Temporarily blanking the screen ...................................................................... 31

Using the menu function .................................................................................. 32

EASY MENU.................................................................................... 34

Aspect, Auto keystone,

k

eystone

,

k

eystone

,

p

erfect

fit

,

picture mode,

eco mode,

m

irror, reset, filter time, lAnguAge, AdvAnced menu, exit

PICTURE menu ...............................................................................36

Brightness, contrAst, gAmmA, color temp,

color, tint, shArpness, Active iris, my memory

IMAGE menu ................................................................................... 39

Aspect, over scAn, v position, h position, h phAse, h size, Auto Adjust execute

INPUT menu ................................................................................... 42

progressive, video nr, color spAce, component, video formAt, hdmi formAt, hdmi rAnge,

c

omputer in, frAme lock, resolution

SETUP menu .................................................................................. 46

Auto keystone,

k

eystone

,

k

eystone

,

p

erfect

fit

, Auto eco mode, eco mode,

mirror,

s

tAndBy mode, monitor out

3ViewSonic Pro9500

Contents

AUDIO menu ................................................................................... 49

volume, speAker, Audio source, hdmi Audio, mic level, mic volume

SCREEN menu ................................................................................ 51

lAnguAge, menu position, BlAnk, stArt up,

M

yScreen

, M

yScreen Lock

, messAge,

s

ource nAme, templAte, c.c.

OPTION menu................................................................................. 57

Auto seArch, Auto keystone, direct power on, Auto power off, usB type B, lAmp time,

f

ilter time, my Button, my source, service

NETWORK menu ............................................................................ 67

setup, projector nAme, my imAge, Amx d.d., presentAtion, informAtion, service

SECURITY menu ............................................................................ 74

security pAssword chAnge,

M

yscreen pAssword, pin lock, trAnsition detector,

m

y text pAssword, my text displAy, my text writing, security indicAtor, stAck lock

Presentation tools ......................................................................... 80

PC-LESS Presentation

................................................................................... 80

Thumbnail Mode, Full Screen Mode, Slideshow mode, Playlist

USB Display

........................................................................................................

89

Right-Click menu, Floating menu, Options window

Maintenance .................................................................................. 92

Replacing the lamp ........................................................................................... 92

Cleaning and replacing the air lter ......................................................................... 94

Replacing the internal clock battery

......................................................................... 96

Other care ......................................................................................................... 97

Troubleshooting ............................................................................. 98

Related messages ............................................................................................ 98

Regarding the indicator lamps .......................................................................... 99

Shutting the projector down ............................................................................ 101

Resetting all settings ....................................................................................... 101

Phenomena that may be easy to be mistaken for machine defects

.......................... 102

Specications .............................................................................. 106

4ViewSonic Pro9500

Contents

Network Guide

1. Connection to the Network .................................................. 108

1.1 System requirements ............................................................................. 108

1.1.1 Required equipment preparation ..................................................................................108

1.1.2 Hardware and software requirement for computer ...................................................... 108

1.2 Installing the “LiveViewer” ...................................................................... 110

1.2.1 Installing the “LiveViewer” .............................................................................................110

1.3 Process to connect the network ............................................................. 112

1.3.1 Process overview ......................................................................................................... 112

1.3.2 Starting the “LiveViewer” ...............................................................................................113

1.4 Selecting the network connection mode ................................................. 114

1.4.1 Selecting either the wireless LAN or wired LAN .......................................................... 114

1.4.2 Selecting My Connection ............................................................................................. 116

1.5 Selecting the network connection method .............................................. 116

1.5.1 Passcode connection ................................................................................................... 117

1.6 Manual Conguration ............................................................................. 127

1.6.1 Prole connection ........................................................................................................ 127

1.6.2 History connection ....................................................................................................... 128

1.7 Conguring the network settings manually ............................................. 129

1.8 Conrming the connection to your destination ....................................... 134

1.8.1 Connection and transmission ....................................................................................... 134

1.8.2 Connection error .......................................................................................................... 136

1.9 Prole data ............................................................................................. 137

1.9.1 Outline of Prole data .................................................................................................. 137

1.9.2 Making Prole data ...................................................................................................... 137

1.9.3 Editing Prole data ....................................................................................................... 138

1.9.4 Registering My Connection .......................................................................................... 139

2. Network Presentation ........................................................... 141

2.1 Using the “LiveViewer” ........................................................................... 141

2.1.1 Main menu and Operating buttons ............................................................................... 141

2.1.2 Displaying the status .................................................................................................... 143

2.1.3 Switching the display mode ......................................................................................... 144

2.1.4 Option menu ................................................................................................................ 145

2.2 Starting the Network Presentation .......................................................... 147

2.2.1 Display mode ............................................................................................................... 147

2.2.2 Presenter mode ........................................................................................................... 148

2.2.3 Display User Name ...................................................................................................... 148

5ViewSonic Pro9500

3. Web Control .......................................................................... 149

3.1 Logon ..................................................................................................... 150

3.2 Network Information ............................................................................... 152

3.3 Network Settings .................................................................................... 153

3.4 Port Settings ........................................................................................... 154

3.5 Mail Settings ........................................................................................... 156

3.6 Alert Settings .......................................................................................... 157

3.7 Schedule Settings .................................................................................. 158

3.8 Date/Time Settings ................................................................................. 162

3.9 Security Settings .................................................................................... 164

3.10 Projector Control .................................................................................. 165

3.11 Remote Control ..................................................................................... 171

3.12 Projector Status .................................................................................... 172

3.13 Network Restart .................................................................................... 173

4. My Image Function ............................................................... 174

5. Messeger Function ............................................................... 176

6. Network Bridge Function ..................................................... 178

6.1 Connecting devices ................................................................................ 178

6.2 Communication setup ............................................................................. 179

6.3 Communication port ............................................................................... 179

6.4 Transmission method ............................................................................. 180

6.4.1 HALF-DUPLEX ............................................................................................................ 180

6.4.2 FULL-DUPLEX ............................................................................................................. 181

7. Other Functions .................................................................... 182

7.1 E-mail Alerts ........................................................................................... 182

7.2 Projector Management using SNMP ...................................................... 184

7.3 Event Scheduling ................................................................................... 184

7.4 Command Control via the Network ........................................................ 188

8. Troubleshooting ................................................................... 193

Appendix ................................................................................... 196

RS232 ............................................................................................................196

PJLink ............................................................................................................. 219

Instant Stack Guide ........................................................................................ 221

End User License Agreement for the projector software ................................ 258

Contents

6ViewSonic Pro9500

Introduction

The projector provides you with the broad use by the following features.

ü This projector has a variety of I/O ports that supposedly cover for any

business scene. The HDMI port can support various image equipment which

have digital interface to get clearer pictures on a screen.

ü This projector has a 1.7 times optical zoom, horizontal and vertical manual

lens shift, allowing exible installation.

ü If you insert a USB storage device, such as a USB memory, into the USB

TYPE A port and select the port as the input source, you can view images

stored in the device.

ü This projector can be controlled and monitored via LAN connection.

ü The built-in 16W speaker can deliver sufcient sound volume in a large space

like a classroom without external speakers.

Features

Contents of package

Your projector should come with the items shown below. Check that all the items

are included. Require of your dealer immediately if any items are missing.

(1) Remote control with two AA batteries

(2) Power cord

(3) Computer cable

(4) Lens cover

(5) User’s manuals (Book x1, CD x1)

NOTE • Keep the original packing materials for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution for the lens.

• The projector may make a rattling sound when tilted, moved or shaken, since

a ap to control the air ow inside of the projector has moved. Be aware that

this is not a failure or malfunction.

(5)

(2)

(3)

(4)

(1)

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT SEARCH

BLANK

MUTE

MY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

UP

VOLUME

DOWN

࡯

ON

OFF

㧗

FREEZE

7ViewSonic Pro9500

Introduction

Part names

Projector

(1) Lamp cover

The lamp unit is inside.

(2) Speakers (x2)

(3) Filter cover

The air lter and intake vent are inside.

(4) Elevator feet (x2)

(5) Elevator buttons (x2)

(6) Remote sensor

(7) Lens

(8) Lens cover

(9) Pocket caps

(10) Intake vents

(11) Control panel

(12) Lens adjuster door

The adjusters for the lens are behind

the door.

(13) AC IN (AC inlet)

(14) Exhaust vent

(15) Rear panel

(16) Security bar

(17) Battery cover

The internal clock battery is inside.

(18) Heel

►Do not open or remove any portion of the product, unless the

manuals direct it.

►Do not subject the projector to unstable conditions.

►Do not apply a shock or pressure to this product.

►Do not look into the lens and the openings on the projector while the lamp is

on.

►Keep the pocket caps away from children and pets. Make sure they do not

swallow the caps. If swallowed consult a physician immediately for emergency

treatment.

WARNING

►Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Do not attach anything onto the lens except the lens cover of this

projector because it could damage the lens, such as melting the lens.

CAUTION

(continued on next page)

8ViewSonic Pro9500

Introduction

Part names (continued)

Control panel and Lens adjusters

LOCK

(1) Lens adjuster door

(2) FOCUS ring

(3) ZOOM ring

(4) HORIZONTAL (horizontal) adjuster

(5) VERTICAL (vertical) adjuster

(6) LOCK (horizontal lens position lock)

(7) STANDBY/ON button

(8) INPUT button

(9) MENU button

(10) SECURITY indicator

(11) LAMP indicator

(12) TEMP indicator

(13) POWER indicator

(14) Cap storage pockets

Rear panel

(1) LAN port

(2) USB TYPE A port

(3) HDMI port

(4) USB TYPE B port

(5) MIC port

(6) AUDIO IN1 port

(7) AUDIO IN2 port

(8) AUDIO IN3 (R,L) ports

(9) AUDIO OUT (R,L) ports

(10) COMPUTER IN1 port

(11) COMPUTER IN2 ports

(G/Y, B/Cb/Pb, R/Cr/Pr, H, V)

(12) REMOTE CONTROL port

(13) MONITOR OUT port

(14) CONTROL port

(15) COMPONENT ports (Y,Cb/Pb, Cr/Pr)

(16) VIDEO port

(17) S-VIDEO ports

(18) Shutdown switch

(19) Security slot

(continued on next page)

9ViewSonic Pro9500

Introduction

Part names (continued)

Remote control

Back of

the remote control

(2)

(1)

(6)

(5)

(16)

(8)

(9)

(19)

(17)

(20)

(22)

(24)

(10)

(4)

(3)

(7)

(12)

(14)

(11)

(13)

(15)

(18)

(21)

(23)

(25)

(26)

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT SEARCH

BLANK

MUTE

MY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

UP

VOLUME

DOWN

࡯

ON

OFF

㧗

FREEZE

(1) VIDEO button

(2) COMPUTER button

(3) SEARCH button

(4) STANDBY/ON button

(5) ASPECT button

(6) AUTO button

(7) BLANK button

(8) MAGNIFY - ON button

(9) MAGNIFY - OFF button

(10) MY SOURCE/DOC.CAMERA button

(11) VOLUME - button

(12) PAGE UP button

(13) PAGE DOWN button

(14) VOLUME + button

(15) MUTE button

(16) FREEZE button

(17) MY BUTTON - 1 button

(18) MY BUTTON - 2 button

(19) KEYSTONE button

(20) POSITION button

(21) MENU button

(22) ▲/▼/◄/► cursor buttons

(23) ENTER button

(24) ESC button

(25) RESET button

(26) Battery cover

10ViewSonic Pro9500

Setting up

Install the projector according to the environment

and manner the projector will be used in.

For the case of installation in a special state

such as ceiling mount, the specied mounting

accessories and service may be required.

Before installing the projector, consult your

dealer about your installation.

(continued on next page)

Arrangement

Refer to the following tables T-1 to determine the screen size and projection

distance. The values shown in the table are calculated for a full size screen.

Ⓗ × Ⓥ :

Screen size

ⓐ :

Projection distance

(from the projector's end)

ⓑ , ⓒ

: Screen height

Projector top

Projector bottom

T-1 (1024X768) (±10%)

Screen

type

4:3 16:9

Screen

size

Projection

distance

Screen height

Screen

size

Projection

distance

Screen height

Ⓗ Ⓥ

ⓐ min. ⓐ max.

ⓑ ⓒ Ⓗ Ⓥ

ⓐ min. ⓐ max.

ⓑ ⓒ

(inch) m m m inch m inch cm inch cm inch m m m inch m inch cm inch cm inch

30 0.6 0.5 0.9 34 1.5 57 46 18 0 0 0.7 0.4 0.9 37 1.6 63 44 17 -6 -2

40 0.8 0.6 1.2 46 2.0 77 61 24 0 0 0.9 0.5 1.3 50 2.1 84 58 23 -8 -3

50 1.0 0.8 1.5 58 2.5 97 76 30 0 0 1.1 0.6 1.6 63 2.7 106 73 29 -10 -4

60 1.2 0.9 1.8 70 3.0 117 91 36 0 0 1.3 0.7 1.9 76 3.2 128 87 34 -12 -5

70 1.4 1.1 2.1 82 3.5 137 107 42 0 0 1.5 0.9 2.3 90 3.8 150 102 40 -15 -6

80 1.6 1.2 2.4 94 4.0 157 122 48 0 0 1.8 1.0 2.6 103 4.3 171 116 46 -17 -7

90 1.8 1.4 2.7 106 4.5 177 137 54 0 0 2.0 1.1 2.9 116 4.9 193 131 51 -19 -7

100 2.0 1.5 3.0 118 5.0 197 152 60 0 0 2.2 1.2 3.3 129 5.5 215 145 57 -21 -8

120 2.4 1.8 3.6 142 6.0 237 183 72 0 0 2.7 1.5 3.9 155 6.6 258 174 69 -25 -10

150 3.0 2.3 4.5 179 7.5 297 229 90 0 0 3.3 1.9 5.0 195 8.2 323 218 86 -31 -12

200 4.1 3.0 6.1 239 10.1 396 305 120 0 0 4.4 2.5 6.6 261 11.0 432 291 114 -42 -16

250 5.1 3.8 7.6 300 12.6 496 381 150 0 0 5.5 3.1 8.3 327 13.7 541 363 143 -52 -20

300 6.1 4.6 9.1 360 15.1 596 457 180 0 0 6.6 3.7

10.0

393 16.5 650 436 172 -62 -25

11ViewSonic Pro9500

Setting up

Arrangement (continued)

WARNING

(continued on next page)

►Install the projector where you can access the power

outlet easily. If an abnormality should occur, unplug the projector urgently.

Otherwise it could cause a re or electric shock.

►Do not subject the projector to unstable conditions. If the projector falls

or topples over, it could result in injury or damage to the projector and the

surrounding things. Using a damaged projector could result in a re and an

electric shock.

• Do not place the projector in unstable places, such as an inclined surface,

places subject to vibration, on top of a wobbly table or cart, or a surface that is

smaller than the projector.

• Do not put the projector on its side, front or rear position.

• Do not attach nor place anything on the projector unless otherwise specied in

the manual.

• Do not use any mounting accessories except the accessories specied by the

manufacturer. Read and keep the manuals of the accessories used.

• For special installation such as ceiling mounting, be sure to consult your dealer

beforehand.

►

Do not install the projector near thermally conductive or ammable

things. Such things when heated by the projector could result in a re and burns.

• Do not place the projector on a metal stand.

►Do not place the projector where any oils, such as cooking or machine

oil, are used. Oil may harm the product, resulting in malfunction, or falling from

the mounted position.

►Do not place the projector in a place where it may get wet. Getting the

projector wet or inserting liquid into the projector could cause a re and an

electric shock, and damage the projector.

• Do not place the projector near water, such as in a bathroom, kitchen, or

poolside.

• Do not place the projector outdoors or by the window.

• Do not place anything containing liquid near the projector.

12ViewSonic Pro9500

Setting up

Arrangement (continued)

►Place the projector in a cool place with sufcient

ventilation. The projector may shutdown automatically or may malfunction if its

internal temperature is too high.

Using a damaged projector could result in a re and an electric shock.

• Do not place the projector in direct sunlight or near hot objects such as heaters.

• Keep a space of 30 cm or more between a side of the projector and other

objects such as walls.

• Do not place the projector on carpet, cushions or bedding.

• Do not stop up, block nor cover the projector's vent holes. Do not place

anything around the projector that could be sucked in or stuck to the projector's

intake vents.

• Do not place the projector at places that are exposed to magnetic elds, doing

so can cause the cooling fans inside the projector to malfunction.

►Avoid placing the projector in smoky, humid or dusty place. Placing the

projector in such places could cause a re, an electric shock and malfunction of

the projector.

• Do not place the projector near humidiers. Especially for an ultrasonic

humidier, chlorine and minerals contained in tap water are atomized and could

be deposited in the projector causing image degradation or other problems.

• Do not place the projector in a smoking area, kitchen, passageway or by the

window.

• Position the projector to prevent light from directly hitting the

projector's remote sensor.

• Do not place the product in a place where radio interference may be caused.

• Check and correct the setting for FAN SPEED of SERVICE in the OPTION

menu according to the usage environment. If the projector is used with a wrong

setting, it may cause damage to the projector itself or the parts inside.

• Keep heat-sensitive things away from the projector. Otherwise, they may be

damaged by the heat from the projector.

CAUTION

NOTICE

13ViewSonic Pro9500

Setting up

Connecting with your devices

Before connecting the projector to a device, consult the manual of the device to

conrm that the device is suitable for connecting with this projector and prepare

the required accessories, such as a cable in accord with the signal of the device.

Consult your dealer when the required accessory did not come with the product or

the accessory is damaged.

After making sure that the projector and the devices are turned off, perform

the connection, according to the following instructions. Refer to the gures in

subsequent pages.

Before connecting the projector to a network system, be sure to read Network

Guide too.

►Use only the appropriate accessories. Otherwise it could

cause a re or damage the projector and devices.

• Use only the accessories specied or recommended by the projector’s

manufacturer. It may be regulated under some standard.

• Neither disassemble nor modify the projector and the accessories.

• Do not use the damaged accessory. Be careful not to damage the accessories.

Route a cable so that it is neither stepped on nor pinched out.

WARNING

►For a cable with a core at only one end, connect the end

with the core to the projector. That may be required by EMI regulations.

CAUTION

• Plug-and-Play is a system composed of a computer, its operating system

and peripheral equipment (i.e. display devices). This projector is VESA DDC

2B compatible. Plug-and-Play can be used by connecting this projector to a

computer that is VESA DDC (display data channel) compatible.

- Take advantage of this feature by connecting a computer cable to the

COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work

properly if any other type of connection is attempted.

- Please use the standard drivers in your computer as this projector is a Plug-

and-Play monitor.

• Do not turn on or off the projector while connected to a device in

operation, unless that is directed in the manual of the device. Otherwise it may

cause malfunction in the device or projector.

• The function of some input ports can be selected according to your usage

requirements. Check the reference page indicated beside each port in the

following illustration.

• Be careful not to mistakenly connect a connector to a wrong port. Otherwise it

may cause malfunction in the device or projector.

- When connecting a connector to a port, make sure that the shape of the

connector ts the port.

- Tighten the screws to connect a connector equipped with screws to a port.

- Use the cables with straight plugs, not L-shaped ones, as the input ports of

the projector are recessed.

About Plug-and-Play capability

NOTE

(continued on next page)

14ViewSonic Pro9500

Setting up

Connecting with your devices (continued)

Computer

• Before connecting the projector to a computer, consult the computer’s

manual and check the compatibility of the signal level, the synchronization

methods and the display resolution output to the projector.

- Some signal may need an adapter to input this projector.

- Some computers have multiple screen display modes that may include some

signals which are not supported by this projector.

- Although the projector can display signals with resolution up to UXGA

(1600X1200), the signal will be converted to the projector’s panel resolution

before being displayed. The best display performance will be achieved if the

resolutions of the input signal and the projector panel are identical.

• If you connect this projector and a notebook computer, you need output the

display to an external monitor, or output simultaneously to the internal display

and an external monitor. Consult the computer's manual for the setting.

• Depending on the input signal, the automatic adjustment function of this

projector may take some time and not function correctly.

- Note that a composite sync signal or sync-on-green signal may confuse the

automatic adjustment function of this projector.

- If the automatic adjustment function does not work correctly, you may not see

the dialog to set the display resolution. In such a case, use an external display

device. You may be able to see the dialog and set an appropriate display

resolution.

NOTE

(continued on next page)

15ViewSonic Pro9500

Setting up

Connecting with your devices (continued)

Computer

Access

point

USB

storage

device

(continued on next page)

• If an oversized USB storage device blocks the LAN port, use a USB

extension cable to connect the USB storage device.

NOTE

► Before connecting the projector to a network system be sure

to obtain the consent of the administrator of the network.

►Do not connect the LAN port to any network that might have the excessive

voltage.

►Before removing the USB storage device from the port of the projector, be

sure to use the REMOVE USB function on the thumbnail screen to secure your

data.

CAUTION

Page is loading ...

ViewSonic VS13835 User manual

This manual is also suitable for

ViewSonic VS13835 User manual

Related papers

Other documents