Andersen Frame Assembly Installation guide

Brand: Andersen

Model: Frame Assembly

Type: Installation guide

Andersen Frame Assembly

Andersen Frame Assembly has all the neccessary features to help you install your Andersen patio door. The assembly comes with easy to follow instructions, and all the parts you need to get the job done right. With the Andersen Frame Assembly, you can be sure that your patio door will be installed correctly and will provide years of trouble-free operation.

Here are some of the features and benefits of the Andersen Frame Assembly:

Easy to install: The Andersen Frame Assembly comes with detailed instructions that make installation a breeze.
Complete assembly: The Andersen Frame Assembly includes all the parts you need to install your Andersen patio door, including the frame, jambs, and weatherstripping.

Andersen Frame Assembly

Here are some of the features and benefits of the Andersen Frame Assembly:

Easy to install: The Andersen Frame Assembly comes with detailed instructions that make installation a breeze.
Complete assembly: The Andersen Frame Assembly includes all the parts you need to install your Andersen patio door, including the frame, jambs, and weatherstripping.

Supplies Needed / Suministros necesarios

Formable Self-adhering Sill Flashing*

Flashing para riel auto-adherente moldeable*

Flashing* / Flashing*

Or other ashing method/material

recommended by a contractor or architect.

Installation anges do not take the place

of ashing.

O bien otro método/material de ashing

recomendado por un contratista o

arquitecto. Las bridas de instalación no

reemplazan el ashing.

• House Wrap Tape /

Cinta para sellar las uniones del house wrap exterior

• Drip Cap (full width) / Tapa de goteo (ancho completo)

• Extension Jambs (optional) / Jambas de extensión (opcional)

• Low Expanding Foam / Espuma de baja expansión

• Shims (waterproof) / Cuñas (impermeables)

• Foam Backer Rod / Varilla de respaldo de espuma

• Sealant / Sellador

• Tape / Cinta

• Staples / Grapas

for Andersen® A-Series 2-Panel, 3-Panel and 4-Panel Gliding Patio Doors and

A-Series 2-Panel, 3-Panel and 4-Panel Gliding Patio Doors with Stormwatch® Protection

para puertas corredizas para patio de 2 paneles, 3 paneles y 4 paneles de la serie A de Andersen® y

para puertas corredizas para patio de 2 paneles, 3 paneles y 4 paneles de la serie A con protección Stormwatch®

Frame Assembly and Installation (doors taller than 8')

Ensamblaje del marco, instalación y extracción

(para puertas de más de 8')

Tools Needed / Herramientas necesarias

• Safety glasses /

Gafas de seguridad

• J-Roller / Rodillo tipo J

• Hammer / Martillo

• Tape measure / Cinta métrica

• Level / Nivel

• Putty Knife / Espátula

• Nail Gun / Pistola de clavos

• Staple Gun / Pistola engrapadora

• Phillips Screwdriver / Destornillador Phillips

• Drill/Driver / Taladro/Destornillador

• Caulk Gun / Pistola para calafatear

• Utility knife / Cuchilla de uso general

• Flat Blade Screwdiver /

Destornillador de punta plana

• 1/16" Drill Bit / Broca para taladro de 1/16"

• 1/8" Drill Bit / Broca para taladro de 1/8"

Parts Included / Partes incluidas

(1) Screw Pack Containing: / El paquete de tornillos contiene:

(1) Instruction Guide /

Guía de instrucciones

(1) Frame Assembly Pack / Paquete de ensamblaje del marco

(1) Frame Installation Pack / Paquete de instalación del marco

(1) Panel Installation Pack / Paquete de instalación del panel

(1-2) Stiffener Packs / Paquetes del refuerzo

(1-2) Exterior Fastener Cover Packs

Paquetes de la cubierta del sujetador exterior

(1-2) Interior Fastener Cover Packs

Paquetes de la cubierta del sujetador interior

(1) Patio Door Frame / Marco de puerta para patio

(0-2) Stationary Jamb Trim /

Contramarco de jamba estacionaria

(1-2) Operating Panel Interlock Weatherstrip /

Burlete de enganche del panel operativo

(1-2) Stationary Panel Interlock Weatherstrip

Burlete de enganche del panel estacionario

(2-4) Panel Stiffeners / Refuerzos del panel

(1-2) Locks / Cerraduras

(1-2) Receivers / Receptores

(1) Tube Silicone / Silicona en tubo

Check expiration date. Contact

Service Department if expired.

Verique la fecha de vencimiento. Comuníquese con

el Departamento de Servicios si estuviera vencida.

or*

o bien*

Liquid ashing

recommended on

concrete slab.

Se recomienda el uso

de ashing líquido en

losa de concreto.

9117014 BB Revised 01/25/23

2-Panel Door Shown

Se muestra puerta de 2 paneles

Silicone

Silicona

Read these instructions before starting procedure. For additional information visit www.andersenwindows.com. For questions call 1-888-888-7020.

Lea estas instrucciones antes de iniciar el procedimiento. Para obtener información adicional, visite www.andersenwindows.com

Si tiene alguna pregunta, llame al 1-888-888-7020.

▶Do not remove packing clips from door until instructed.

No retire los sujetadores de embalaje de la puerta hasta que se le indique.

9117014

Extend spacer 3/4"

for clip attachment.

Extienda el espa-

ciador 3/4" para el

sujetador metálico.

Add interior extension jamb depth to

finished interior wall.

Agregue el ancho de la jamba de extensión

interior a la pared interior acabada.

Add interior extension jamb depth to

finished interior wall.

Agregue el ancho de la jamba de extensión

interior a la pared interior acabada.

*6" Interior frame edge to drop nose channel.

*Borde del marco interior de 6" al canal del

riel en pendiente.

*4-9/16" Interior frame edge to installation flange.

*Borde del marco interior de 4-9/16" a la brida de instalación.

*4-9/16" Interior frame edge to installation flange.

*Borde del marco interior de 4-9/16" a la brida de instalación.

*4-9/16" Interior frame edge to installation flange.

*Borde del marco interior de 4-9/16" a la brida de instalación.

*6" Interior frame edge to drop

nose channel.

*Borde del marco interior de 6"

al canal del riel en pendiente.

Stormwatch® Patio Doors Only / Puertas para patio Stormwatch® únicamente

Interior Frame Edge

Borde del marco interior

Installation Flange

Brida de instalación

Drop Nose Channel

Canal de la pendiente

Concrete Slab with Dap Out / Losa de concreto con muesca

Flat Concrete Slab / Losa de concreto plana

Frame Constuction / Ajuste el pórtico para colocar la pendiente del riel de 3/4"

Additional clearance is needed under exterior portion of drop nose channel. When interior extension jambs are used, extension jamb

depth must be added to dimensions with asterisk (*).

Se debe dejar un espacio adicional debajo de la parte exterior del canal de la pendiente. Cuando se utilizan jambas de extensión

interiores, se debe agregar la profundidad de la jamba de extensión a las dimensiones con un asterisco (*).

3/4" Sill Drop

Pendiente del riel de 3/4"

3/4" dap out may be required for use on

concrete slab construction.

Es posible que se deba realizar una muesca de

3/4" en la construcción de losa de concreto.

Adjust decking to

accommodate 3/4" sill drop.

Ajuste el pórtico para colocar

la pendiente del riel de 3/4".

Interior Frame Edge

Borde del marco interior

Interior Frame Edge

Borde del marco interior

Interior Extension Jamb

Jamba de extensión interior

Interior Extension Jamb

Jamba de extensión interior

Interior Extension Jamb

Jamba de extensión interior

3/4" Sill Drop

Pendiente del riel

de 3/4"

3/4" Sill Drop

Pendiente del

riel de 3/4"

Interior View

Vista interior

Exterior View

Vista exterior

Exterior View

Vista exterior

Exterior View

Vista exterior

Heavy Duty Sill Clip

Sujetador de riel de

alta resistencia

*6" Interior frame edge to drop nose channel.

*Borde del marco interior de 6" al canal del

riel en pendiente.

3/4" Waterproof Spacer

Losa de concreto con muesca

Rough opening may need to be adjusted to

accommodate 3/4" spacer full length of

opening. Seal and fasten spacer to opening.

Es posible que se deba ajustar la abertura no

acabada para colocar el espaciador de 3/4" en

todo el largo de la abertura. Selle y ajuste el

espaciador a la abertura.

Add interior extension jamb depth

to finished interior wall.

Agregue el ancho de la jamba

de extensión interior a la pared

interior acabada.

Drop Nose Channel

Canal de la pendiente

Drop Nose Channel

Canal de la pendiente

IMPORTANT/IMPORTANTE

9117014

These components used during panel installation.

Estos componentes se utilizan durante la instalación del panel.

(1) Receiver

Position

Template

Plantilla de

posición del

receptor

(1) Receiver

Receptor

(1) Lock

Cerrojo

(1) Bezel

Bisel

(1) Receiver

Position

Template

Plantilla de

posición del

receptor

(1) Receiver

Receptor

(1) Lock

Cerrojo

(1) Bezel

Bisel

2- and 3-Panel Door / Puerta de 2 y 3 paneles

(4) #8-32 x 7/8" Machine Screw

Tornillos para metales No. 8-32 x 7/8"

(2) #10 x 3" Security Screw

Tornillo de seguridad

n.º 10 x 3"

(1) Lock

Cerrojo

(1) 2- or 3-Panel Receiver

Receptor de 2 o 3

paneles

(1) Lock

Cerrojo

(1) 4-Panel Door Receiver

Receptor para puerta

de 4 paneles

4-Panel Hardware Pack /

Paquetes de herrajes para 4 paneles

2- or 3-Panel Hardware Pack

(one pack for 2-panel doors, two packs for 3-panel doors)

Paquetes de herrajes para 2 o 3 paneles

(un paquete para puerta de 2 paneles; dos paquetes para

puerta de 3 paneles)

2- or 3-Panel Hardware Pack

(one pack for 2-panel doors, two packs for 3-panel doors)

Paquetes de herrajes para 2 o 3 paneles

(un paquete para puerta de 2 paneles; dos paquetes para

puerta de 3 paneles)

4-Panel Hardware Pack /

Paquetes de herrajes para 4 paneles

(5) #10 x 3" Stainless Steel Screw

Tornillo de acero inoxidable No. 10 x 3"

or/

o bien

or/

o bien

(2) #10 x 3" Stainless Steel Screw

Tornillo de acero inoxidable No. 10 x 3"

(1) #10 x 4" Security Screw

Tornillo de seguridad n.º 10 x 4"

(2) #10-32 x 1-1/4" Machine Screw

Tornillo para metales No. 10-32 x 1-1/4"

4-Panel Door / Puerta de 4 paneles

For Flush Mount Hardware/

Para herrajes de montaje embutido

For Reachout Lock Hardware/

Para herrajes de cerrojo de alcance

For Flush Mount Hardware/

Para herrajes de montaje embutido

For Reachout Lock Hardware/

Para herrajes de cerrojo de alcance

Installation Flange

Corner Flashing

Flashing de la esquina

de la brida de instalación

#8 x 3" Cone Point Stainless Steel Screw

Tornillo de acero inoxidable de punta cónica nº 8 x 3 pulgadas

#8 x 2-1/2" Yellow Zinc Screw

Tornillo de cinc nº 8 x 2-1/2 pulgadas de color amarillo

#8 x 1/2" Stainless Steel Screw

Tornillo de acero inoxidable nº 8 x 1/2"

These components used during panel installation. (Continued)

Estos componentes se utilizan durante la instalación del panel. (Continued)

9117014

2 2 2

5 9 9

Frame Assembly Pack:

Paquete de ensamblaje

del marco:

Frame Installation Pack:

Paquete de instalación del marco:

2-Panel Door

Puerta de 2

paneles

2-Panel Door

Puerta de 2

paneles 3-Panel Door

Puerta de 3

paneles

3-Panel Door

Puerta de 3

paneles 4-Panel Door

Puerta de 4

paneles

4-Panel Door

Puerta de 4

paneles

End Caps

Tapas de los

extremos

Heavy Duty Sill Clip

Sujetador de riel de alta

resistencia

(one left-hand, one right-hand)

(una para el lado izquierdo,

una para el lado derecho)

Use remodel bracket (purchased separately) for anchoring patio door sill in applications where existing oor butts up to interior surface of patio

door sill. Remodel bracket is not used on sidelights or gliding stationary patio doors. Remodel bracket does not pass through joined patio door

jambs. Remodel bracket must be centered on individual patio doors.

Utilice el soporte de remodelación (se compra por separado) para anclar el riel inferior de la puerta para patio en aplicaciones donde las uniones a

tope de piso se extienden hasta la supercie interior del riel inferior de la puerta para patio. El soporte de remodelación no se utiliza en paneles jos

laterales ni en puertas para patio corredizas y jas. El soporte de remodelación no atraviesa las jambas unidas de las puertas para patio. El soporte

debe centrarse en puertas para patio individuales.

8 8 8

6 6 6

4 4 4

18 18 18

20 36 36

#10 x 3" Yellow Zinc Screws

Tornillo de cinc amarillo No. 10 x 3"

#10 x 1" Stainless Steel Screws

Tornillos de acero inoxidable No. 10 x 1"

2-Panel Door

Puerta de 2

paneles

2-Panel Door

Puerta de 2

paneles

3-Panel Door

Puerta de 3

paneles

3-Panel Door

Puerta de 3

paneles

4-Panel Door

Puerta de 4

paneles

4-Panel Door

Puerta de 4

paneles

▶ Remaining screw/part packs are used in panel assembly guide.

Los paquetes de tornillos/piezas restantes se usan en la guía de ensamblaj.

Stationary

Jamb Trim

Contramarco

de jamba

estacionaria

Stationary

Panel Interlock

Weatherstrip

Burlete de

enganche

del panel

estacionario

Operating Panel

Interlock

Weatherstrip

Burlete de

enganche del

panel operativo

Panel

Stiffener

Refuerzos del

panel

BAG

IMPORTANT/IMPORTANTE

DraftDraft

Procedure and

Product Information

IMPORTANT

Important Safety and

Product Information

for Andersen® Windows and Doors

This is the Safety Alert Symbol used to alert you to

potential injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Signal Word and Consequence

Major Injury/Death

WARNING

COULD

Result in: Minor Injury

CAUTION

COULD

Result in:

Product or Property

Damage

NOTICE

COULD

Result in:

· Leave this installation instruction with the home/building owner.

· For additional support or help please go to: andersenwindows.com and visit our Help Center.

· To congure installation instructions go to: andersenwindows.com/installation

Handling Installation

· Use caution when working at elevated heights and

around window and door openings. Follow the

manufacturers’ instructions for ladders and scaffolding.

Failure to do so could result in injury or death.

· Support window or door in opening at all times until

fully fastened. Failure to do so could result in window or

door falling out causing injury, property or product

damage.

· Windows and doors have small parts (e.g. hole plugs,

operator spline caps, fasteners, etc.). Small parts if

swallowed could pose a choking hazard to young

children. Dispose of unused, loose, or easily removed

small parts. Failure to do so could result in injury.

· Windows and doors can be heavy. Use safe lifting

techniques and a reasonable number of people with

enough strength to lift, carry, and install window and

door products. Heavier windows and doors will require

mechanical assistance. Failure to do so could result in

injury, product or property damage.

· DO NOT lift or carry window or door by the exterior

trim or extension jambs. Doing so could result in injury,

product or property damage.

· Windows, doors, and installation components can

have sharp edges. Wear protective equipment when

handling. Failure to do so could result in injury.

· DO NOT drag, rock, cartwheel, or walk windows,

doors, sash, or panels across the floor. Doing so could

result in product or property damage.

Tools

· Follow manufacturers’ instructions for hand and power tools. Always wear safety glasses. Failure to do so could result in

injury, product or property damage.

❚ Tools

❚ Handling

❚ Installation

❚ Sealing

❚ Fastening

❚ Finishing

Safety and Product Information Index

❚ Glass

❚ Protective Film

❚ Cleaning

❚ Use/Operation

❚ Joining

❚ Product Information

Read this Important Safety and Product

Information completely before starting.

WARNING

WARNING WARNING

▶Para obtener la versión en español de Información importante sobre productos y seguridad, visite: andersenwindows.com

DraftDraft

NOTICE

· Andersen head ashing and installation anges DO

NOT take the place of window and door ashing tape or

liquid ashing. Window or door must be properly ashed

and sealed with a material compatible sealant for

protection against water and air inltration.

Failure to do

so could result in product or property damage.

· DO NOT set window or door directly on installation

ange. Doing so could affect product performance, and

could result in product or property damage.

· DO NOT set window directly on sill plate. Elevate

window with shims under the side jambs. Failure to do

so could affect operation and product performance, and

could result in product damage.

· Window or door must be properly shimmed. Failure to

do so could affect operation and product performance,

and could result in product damage.

· A continuous full perimeter interior seal between

window or door frame and opening is required. Failure to

do so will affect product performance, and could result

in product or property damage.

· Protect window and door sills during installation and

throughout construction. Failure to do so could result in

product damage.

· DO NOT remove window or door packaging material until

instructed to do so. Doing so could result in product damage.

Installation (Continued)

NOTICE

· Use masonry screws when fastening directly into

masonry or through a buck into masonry. Failure to do

so could affect product performance, and could result in

product or property damage.

· DO NOT over drive screws or nails. Doing so could

result in product damage.

· Fasteners must be attached to a structural framing

member. Failure to do so will reduce the structural

performance to less than published values and could

affect product performance, and could result in product

or property damage.

Fastening

· Metal fasteners and components could corrode when

exposed to preservative-treated or fire-retardant treated

lumber. Use approved fasteners and components to

fasten window or door. Failure to do so could cause a

failure resulting in injury, product or property damage.

· Fastener must attach to a structural framing member

with a 1-1/2" minimum fastener embedment. Failure to

do so could result in injury, product or property damage.

· DO NOT remove screws that attach installation clips or

gusset plates to window or door frames. Doing so could

result in injury, product or property damage.

Sealing

NOTICE

CAUTION

· Follow instructions of foam, sealant, and flashing

manufacturers regarding safety, material application,

compatibility, and periodic maintenance for continued

weather resistance of their products. Failure to do so

could result in injury, product or property damage.

Finishing

NOTICE

· DO NOT stain or paint weatherstrip, vinyl, glass, or

hardware. Doing so could result in product damage.

· Read and follow nish manufacturer's instructions and

safety information. Failure to do so could result in

product damage.

· DO NOT over load brush with stain or paint when

nishing. Doing so could allow nish to wick between

glass stop or grille, and glass.

WARNING

· Clean and prepare surfaces receiving sealant following

sealant manufacturer's instructions. Failure to do so could

result in water inltration causing product or property damage.

· DO NOT use abrasive cleaners or solvents when

cleaning Fibrex® material. Doing so could result in

product damage. Go to andersenwindows.com for a list

of recommended cleaners.

DraftDraft

NOTICE

Glass

· Unless specifically ordered, Andersen windows are not

equipped with safety glass, and if broken, could

fragment causing injury. Many laws and building codes

require safety glass in locations adjacent to or near

doors. Andersen windows are available with safety glass

that could reduce the likelihood of injury when broken.

Information on safety glass is available from your local

Andersen dealer.

· Tempered or laminated safety glass is not standard for

windows and must be special ordered. Check local

building codes for required locations. Failure to do so

could result in injury, product or property damage.

· DO NOT place suction grips over film

seams on glass. Suction grips will not

hold if placed over lm seam to lift or

move window or door. Window or door

will fall and could result in injury,

product or property damage.

· DO NOT remove any

protective film near

flammable materials.

Static charge created

when removing film

can ignite flammable

materials or cause a

shock. Doing so could result in injury, product or

property damage. See warning label on glass.

· Dispose of protective film immediately after

removing. Failure to do so could pose a suffocation

hazard to children.

NOTICE

· DO NOT remove protective lm from glass until after

construction is completed. Doing so could allow glass to

be damaged.

· Remove protective film from non-glass components

immediately after installation. Failure to do so could

result in product damage.

NOTICE

Cleaning

Protective FilmFinishing (Continued)

· Finish all wood surfaces immediately after

installation. Unnished wood will deteriorate, discolor,

and could bow or split. Some

surfaces are hidden from view.

· Some products are shipped

unassembled, and it may be

more convenient to finish

wood surfaces for these

products prior to

assembly and

installation.

WARNING

· Acid solutions used for cleaning masonry or concrete

will damage all components of window or doors. Protect

window or door and follow cleaning product

manufacturer's instructions. If acid contacts window or

door, wash all surfaces immediately with clean water.

· DO NOT use or apply solvents, abrasives, harsh

chemicals or cleaners to window or door components.

Doing so will result in product damage.

For a list of recommended cleaners go

to: andersenwindows.com

· DO NOT use metal razor blades to

clean glass surface. Glass damage

could result.

· DO NOT apply any type of film to insulating glass.

Doing so could cause thermal stress conditions and

result in glass damage. Shading devices (e.g. insulated

coverings, shutters, etc.) could also cause thermal

stress and condensation causing deterioration of

windows or doors.

· DO NOT use sealants on exterior or

interior glass surface.

NOTICE

DraftDraft

Joining

IMPORTANT

· Buildings constructed prior to 1978 could contain lead

paint which could be disturbed during window or door

replacement. For more information on proper management

of lead paint, go to: www.epa.gov/lead

· Instructions may not be right for all installations due to

building design, construction materials, or methods used

and/or building or site conditions. Consult a contractor or

architect for recommendations.

· Installation flanges may need to be removed for some

installations. (e.g. masonry, replacement), or where exterior

finish is already applied (e.g. siding, brick veneer, stucco).

· Installation ange on the window or door alone will not

properly ash and seal the window or door.

· DO NOT remove band, plastic ties, or packing clips from

window or door until instructed.

· DO NOT remove performance (NFRC) label until after nal

inspection. Doing so could delay nal inspection and

sign-off by the code ofcial.

· Check with your local building code ofcial to identify and

conrm compliance with local building code requirements.

· Contact local authorities or waste management company

for proper recycling and disposal instructions for removed

window or door.

· For cleaning instructions for window and door components

go to: andersenwindows.com.

· During construction protect products from construction

debris, harsh chemical such as brick wash, roof runoff, and

cement/masonry which can cause damage to window and

door products.

· Protective lm is not present on all windows or doors.

Protective lm is not a substitute for masking.

· Remove protective film from glass within six (6) months of

installation and when temperature is above 32° F.

· Remove protective lm by peeling from seam or corner.

Use a plastic scraper to start if needed.

· Extension jambs can be factory applied on some windows

or eld applied prior to installation. DO NOT apply extension

jambs prior to window or door installation that will be

fastened with installation clips. Doing so could prevent

access to installation clips for fastening.

· For extension jamb application refer to

instructions included with part(s) or go to:

andersenwindows.com

· Use painters masking tape for protecting

products during construction. Avoid using

duct or packaging tapes.

Use/Operation

· DO NOT stand in front of or near windows or doors

during a storm. Doing so could result in injury.

Accessories such as grilles, art glass, and insect

screens could dislodge and become airborne if window

or door is impacted by wind-borne debris from severe

storms or hurricane strength winds. In the event of a

storm, remove all accessories from windows or doors

and move to a safe location.

· DO NOT install air conditioner in

window. Doing so could result in

injury, product or property damage.

· Wind load brackets

must be flipped out

when not tilting or

cleaning. If wind load

brackets are not flipped

out, window could blow

in resulting in potential

injury and/or product

damage.

· DO NOT attach objects or accessories to window or

door except Andersen® products specifically designed

for the window or door. Doing so could result in injury,

product or property damage.

Product and General Information

· DO NOT join any window or door, horizontally or

vertically, to any window or door not designed for

joining. Doing so could result in injury, product or

property damage.

· Joined windows or doors must be individually

supported in the opening. Failure to do so could affect

operation and product performance, and could result in

product or property damage.

CAUTION

WARNING

Flipped Out Flipped In

9117014

Remove panel bumper screws and panel bumper and save for

reapplication in panel installation guide.

Retire los tornillos del tope del panel y el tope del panel y guárdelos

para aplicarlos nuevamente en la guía de instalación del panel.

Panel Bumper

Screws

Tornillos del

tope del panel

Panel Bumper

Tope del panel

Remove head stop screws and head stop and save for reapplication in

panel installation guide.

Retire los tornillos del tope de cabecera y el tope de cabecera y

guárdelos para aplicarlos nuevamente en la guía de instalación del

panel.

Head Jamb

Jamba de cabecera

Head Stop

Tope de cabecera

Exterior

Rotate installation anges and lock into position, as shown.

Gire las bridas de instalación y bloquee en posición, tal como se muestra.

Installation Flange

Brida de instalación

Head Stop Screws

Tornillos de tope

de cabecera

Interior

Exterior

9117014

Caulk Gun

Pistola para calafatear

1/4" Silicone Bead

Listón de silicona de 1/4"

Exterior

Place sill and end caps on a clean surface. Insert end caps into sill. Cut silicone tube tip straight to 1/8". Apply 1/4" silicone bead to the silicone

path on both end caps.

Ubique el riel y las tapas de los extremos sobre una supercie limpia. Coloque las tapas de los extremos dentro del riel. Corte la punta del tubo de

silicona de manera recta a 1/8". Aplique un listón de silicona de 1/4" al trayecto de silicona en ambas tapas de extremos.

Sill

Riel

End Cap

Tapa del extremo

Cut silicone tube tip straight to 1/8". Apply silicone to sill end of side jambs along frame cover and wood core.

Corte la punta del tubo de silicona de manera recta a 1/8". Aplique silicona en el extremo del riel inferior de las jambas laterales a lo

largo de la cubierta del marco y del alma de madera.

Frame Cover

Cubierta del

marco

Wood Core

Alma de madera Silicone

Silicona

Wood Core

Alma de madera

Frame Cover

Cubierta del

marco

STATIONARY JAMB

JAMBA ESTACIONARIA

OPERATING JAMB

JAMBA OPERATIVA

9117014

Exterior

Position side jamb to sill, with exterior up. Fasten until ush, using #8 x 3" cone point stainless steel screws, in order, as shown. Apply silicone as

shown. Repeat for opposite side.

Coloque la jamba lateral en el riel, con el lado exterior hacia arriba. Ajuste hasta que quede al ras; utilice tornillos de acero inoxidable de punta

cónica n.º 8 x 3 pulgadas en orden, tal como se muestra. Aplique silicona, como se muestra. Repita las instrucciones en el lado opuesto.

Fasten screws.

Ajuste los tornillos.

Inject silicone in bottom hole until 1/4"

squeeze-out.

Inyecte silicona en el orificio inferior

hasta que salga un excedente de 1/4".

Fasten at bottom hole until flush.

Do not overtighten screws.

Ajuste en el orificio central hasta que esté

al ras. No ajuste demasiado los tornillos.

Sill

Riel

Side Jamb

Jamba lateral

Drill/Driver

Taladro/

destornillador

Silicone

Squeeze-out

Excedente de

silicona

#8 x 3" Cone Point

Stainless Steel Screw

Tornillo de acero

inoxidable de punta

cónica No. 8 x 3"

DO NOT over tighten screws. Doing so could

result in product damage.

NO ajuste demasiado los tornillos. De hacerlo

así, el producto se podría dañar.

NOTICE / AVISO

1st 2nd 3rd

#8 x 2-1/2" Yellow

Zinc Screws

Tornillos de cinc nº

8 x 2-1/2 pulgadas

de color amarillo

Exterior

9117014

Interior

Apply silicone to both ends of head jamb along frame cover and wood

core.

Aplique silicona en ambos extremos de lajamba de cabecera a lo

largo de la cubierta del marco y del alma de madera.

Position head jamb tight to side jambs. Fasten head jamb to side jambs. Inject silicone through frame cover screw holes until squeeze-out is seen at

miter weep. Fasten outer frame.

Coloque la jamba de cabecera en las jambas laterales de manera bien rme. Ajuste la jamba de cabecera a las jambas laterales. Inyecte silicona a

través de los oricios para tornillos de la cubierta del marco hasta que el excedente salga por el drenaje en el inglete. Ajuste el marco exterior.

Head Jamb

Jamba de cabecera

Fasten outer frame.

Ajuste el marco exterior.

#8 x 1/2" Stainless Steel Screws

Tornillos de acero inoxidable No. 8 x 1/2"

Fasten head jamb to side jamb.

Ajuste la jamba de cabecera a la jamba lateral.

Inject silicone through both holes until

1/4" squeeze-out is seen at miter weep.

Inyecte silicona a través de ambos oricios

hasta que salga un excedente de 1/4" por el

drenaje en el inglete.

Silicone squeeze-out here.

Excedente de silicona aquí.

Sill

Riel

Side Jambs

Jamba laterals

Head Jamb

Jamba de

cabecera

Silicone injection takes signicant amount of time.

Incomplete injection will result in water damage to

product/property.

La inyección de silicona lleva una cantidad considerable

de tiempo. La inyección incompleta hará que el agua

dañe el producto o la propiedad.

NOTICE / AVISO

Wood Core

Alma de madera

Frame Cover

Cubierta del marco

1st 2nd 3rd

Check opening size. Allow for ashing thickness.

Verique el tamaño de la abertura. Tenga en cuenta el espesor del

ashing.

Exterior

Joined Units Only / Unidades unidas únicamente

IMPORTANT/IMPORTANTE

9117014

Tape Measure

Cinta métrica

Exterior

Apply installation ange corner ashing. Apply sealant as shown.

Aplique el ashing de la esquina de la brida de instalación. Aplique

sellador como se muestra.

Installation Flange

Corner Flashing

Flashing de la

esquina de la brida

de instalación

Apply sealant

to both sides.

Aplique sellador

en ambos laterales.

Apply sealant to both sides.

Aplique sellador en ambos

laterales.

Use remodel bracket (purchased separately) for anchoring

patio door sill in applications where existing oor butts up to

interior surface of patio door sill. Remodel bracket is not used

on sidelights or gliding stationary patio doors. Remodel bracket

does not pass through joined patio door jambs. Remodel

bracket must be centered on individual patio doors.

Utilice el soporte de remodelación (se compra por separado)

para anclar el riel inferior de la puerta para patio en

aplicaciones donde las uniones a tope de piso se extienden

hasta la supercie interior del riel inferior de la puerta para

patio. El soporte de remodelación no se utiliza en paneles jos

laterales ni en puertas para patio corredizas y jas. El soporte

de remodelación no atraviesa las jambas unidas de las puertas

para patio. El soporte debe centrarse en puertas para patio

individuales.

IMPORTANT/IMPORTANTE

For joined installations, go to the joining guide included in the

joining kit to complete patio door installation.

Para las instalaciones unidas, consulte la guía para unión incluida

en el kit de unión para completar la instalación de la puerta del patio.

Exterior

Interior

9117014

Cut opening in house wrap.

Corte una abertura en el house wrap. Fold in and staple.

Doble y engrape.

Level

Nivel

Tape Measure

Cinta métrica

Utility Knife

Cuchilla de

uso general

Tape

Cinta

Exposed Sheathing

Recubrimiento expuesto

Width of flashing

Ancho del flashing.

45°

Cut and create top ap from house wrap.

Corte y cree una pestaña superior con el house wrap.

Fold ap up and tape.

Doble la pestaña hacia arriba y coloque cinta.

Check plumb, level, square. Diagonals must

be within 1/8".

Verique la plomada, el nivel y la cuadratura.

Las diagonales deben estar entre 1/8".

Exterior

9117014 15

2-3"

Sill Flashing

Flashing para riel

Apply using rm

pressure.

Aplique presionando

rmemente.

Apply ashing at sill (liquid ashing recommended on concrete slab).

Aplique el ashing en el riel inferior (se recomienda el uso de ashing líquido en

losa de concreto).

Liquid ashing

recommended on

concrete slab.

Se recomienda el

uso de ashing líquido

en losa de concreto.

Tape corners. If using remodel bracket, go to

instruction guide included with remodel

bracket and follow instructions.Encinte las

esquinas. Si va a utilizar el soporte de

remodelación, consulte la guía de

instrucciones incluida con el soporte y siga

las instrucciones.

Apply formable ashing. Make sure there are no wrinkles or voids. Failure to

do so may result in product /property damage.

Aplique el ashing moldeable. Asegúrese de que no haya arrugas ni vacíos.

De no hacerlo así, podrían producirse daños al producto/propiedad.

NOTICE / AVISO

Tape

Cinta

Tape

Cinta

J-roller

Rodillo tipo J

IMPORTANT/IMPORTANTE

If using remodel bracket, go to instruction

guide included with remodel bracket and

follow instructions.

Si va a utilizar el soporte de

remodelación, consulte la guía de

instrucciones incluida con el soporte y

siga las instrucciones.

Exterior

Interior

Tip unit and attach heavy duty sill clips to sill. Space clips 6"-12" from each end and remaining evenly in between.

Incline la unidad y ajuste los sujetadores de riel de alta resistencia al riel. Separe los sujetadores de 6 pulgadas-12 pulgadas de cada extremo y

restante de manera uniforme entremedio de ellos.

Heavy Duty Sill Clip

Sujetador de riel de alta resistencia

Sill

Riel

inferior

For 2-panel units, use five (5) clips.

For 3 and 4-panel units, use nine (9) clips.

Para unidades de 2 paneles, utilice cinco

(5) sujetadores.

Para unidades de 3 y 4 paneles, utilice

nueve (9) sujetadores.

9117014

Apply sealant at sides and top. Apply three beads sealant at sill and liberally in bottom corners.

Aplique el sellador en la parte superior y en los laterales. Aplique tres listones de sellador en el

riel y libremente en las esquinas inferior.

Center frame in opening at sill and tip frame

into opening.

Centre el marco en la abertura del riel e

incline el marco dentro de la abertura.

Sides/Top

Laterales/parte superior

3/8" Bead Sealant

Sellador para listones

de 3/8"

Caulk Gun

Laterales/

parte superior

Sill

Riel

1/2"

4-1/4"

1-1/4"

1/4"

If using remodel bracket, continue to follow this

instruction guide excluding sill clip references.

Si va a utilizar el soporte de remodelación, siga la

guía de instrucciones pero ignore las referencias de

los sujetadores de riel.

IMPORTANT/IMPORTANTE

Rigid sill pan modication may be required for sill clip

anchoring and sealing. Failure to seal sill pan will result

in water damage to property.

Puede ser necesaria la modicación de la placa del riel

rígida para el anclaje y sellado del sujetador del riel. No

sellar la placa del riel puede provocar que el agua dañe

la propiedad.

NOTICE / AVISO

23 24

Interior

9117014

Interior

Shim behind each fastener hole at sides. Shims must be tight to

installation ange and recessed 3/8".

Coloque cuñas detrás de cada oricio del sujetador en los

costados. Las cuñas deben ajustarse a la brida de instalación y

empotrarse unos 3/8 pulgadas.

Installation Flange

Brida de instalación

Shim

Cuña

Shim tight to

installation

ange.

Ajuste la cuña

a la brida de

instalación.

Recessed 3/8"

3/8 pulgadas

empotrados

Interior

Shim and secure operating jamb. Do not fully tighten.

Coloque las cuñas y asegure la jamba operativa. No ajuste

completamente.

Check plumb, level and square. Adjust shims as needed until

measurements are within 1/8" and fully tighten screws at sides.

Verique la plomada, el nivel y la cuadratura. Ajuste las cuñas según sea

necesario hasta que las medidas estén entre los 1/8" y ajuste comple-

tamente los tornillos en los laterales.

Do not install head jamb installation screw

prior to stationary panel installation.

No coloque el tornillo de instalación de la

jamba de cabecera antes de la instalación del

panel estacionario.

Check plumb, level and square. Adjust shims as needed until diagonal

measurements are within 1/8". Secure stationary jamb. Do not fully tighten.

Verique la plomada, el nivel y la cuadratura. Ajuste las cuñas según sea

necesario hasta que las medidas diagonales estén entre las 1/8". Ajuste la

jamba estacionaria. No ajuste completamente.

#10 x 3" Yellow Zinc Screws

Tornillos de cinc nº 10 x 3

pulgadas de color amarillo

Fully set screws in

channel.

Asegure completamente

los tornillos en el canal.

Channel

Canal

#10 x 3" Yellow Zinc Screws

Tornillos de cinc nº 10 x 3

pulgadas de color amarillo

IMPORTANT/IMPORTANTE

18 9117014

▶Frame installation is complete. Proceed to panel installation guide.

Se ha completado la instalación del marco. Continúe con la guía de instalación del panel.

Interior

Position sill clips and fasten.

Ubique y ajuste los sujetadores del riel.

Center

Centro

12"

Rigid sill pan modication may be required for sill clip anchoring and sealing.

Failure to seal sill pan will result in water damage to property.

Puede ser necesaria la modicación de la placa del riel rígida para el anclaje

y sellado del sujetador del riel. No sellar la placa del riel puede provocar que

el agua dañe la propiedad.

For masonry installations use masonry screws.

Para instalaciones de mampostería, utilice

tornillos para mampostería.

Wood Floor/Piso de madera Masonry Floor/

Piso de mampostería

#10 x 1" Stainless Steel Screw

Tornillo de acero inoxidable

No. #10 x 1"

3/16" x 1 1/4" minimum Masonry Screw (outside

holes only, supplied by others)

Tornillos para mampostería mínimos 3/16 pulgadas

x 1 1/4 pulgadas (únicamente oricios exteriores,

proporcionados por terceros).

Sill Clip

Sujetador de riel

NOTICE / AVISO IMPORTANT/IMPORTANTE

Andersen Frame Assembly Installation guide

Brand: Andersen

Model: Frame Assembly

Type: Installation guide

Andersen Frame Assembly

Here are some of the features and benefits of the Andersen Frame Assembly:

Easy to install: The Andersen Frame Assembly comes with detailed instructions that make installation a breeze.
Complete assembly: The Andersen Frame Assembly includes all the parts you need to install your Andersen patio door, including the frame, jambs, and weatherstripping.

Download PDF

report

in other languages

español: Andersen Frame Assembly Guía de instalación

Andersen Frame Assembly Installation guide

Andersen Frame Assembly Installation guide

in other languages

Related papers

Other documents