2. Premier Mounts
  3. UMB-DBT

Premier Mounts UMB-DBT User guide

  • Hello! I've reviewed the installation guide for the Premier Mounts display brackets, models UMB-DBT and UMB-DBTS. This document provides instructions on mounting the brackets, adjusting the tilt using the provided screws, and leveling the bracket using the knurled knob. It also describes how to use the thread depth indicator to select the correct hardware. I'm ready to answer your questions about the installation process or features mentioned in the document
  • How can tilt adjustments be made?
    What is the purpose of the thread depth indicator?
    How to adjust clamp brackets?
(4) M6 or M8 Screws
(4) Universal Washer
(4) Universal Spacer
(4) Display Brackets
Thread Depth Indicator
(Qty 1)
Universal Spacer
(Qty 8)
Display Bracket
(1 Pair)
Universal Washer
(Qty 4)
M6 x 12 mm screw
(Qty 4)
M6 x 25 mm screw
(Qty 4)
M8 x 12 mm screw
(Qty 4)
M8 x 16 mm screw
(Qty 4)
M6 x 25 mm screw
(Qty 4)
M6 x 16 mm screw
(Qty 4)
If necessary use a Phillips screw driver
to adjust the clamp brackets down.
Use a thread depth indicator to find the appropriate hardware.
Install the display brackets using four (4) M6 or M8 screws and
four (4) universal washers. Use universal spacers if necessary.
Tilt Adjustments
Tilt adjustments can be made shown in figure 1 by removing the Phillips
screw on the display brackets and installing it to another hole.
( 0º - 5º - 10º - 20º) Degrees
Figure 1
12
UMB-DBT / UMB-DBTS
Installation Guide
premiermounts.com | p. 800.368.9700 | e. [email protected]
Use a Phillips screw driver to secure
the display brackets to the unistrut.
Attach the display brackets to the unistrut.
Commercially available recommended unistrut
P4100T 1 5/8” x 13/16” 14 gauge.
Display Brackets
Unistrut
Unistrut
Leveling adjustments can be made shown in figure 2 by turning the knurl knob.
Leveling
Figure 2
9500135_0
3
5
4
UMB-DBT / UMB-DBTS
Installation Guide
premiermounts.com | p. 800.368.9700 | e. [email protected]
/