Included: Power Adapter
Back
Front
DC/5V
DC/5V
HDMI Splitter 1x8 with Full 3D and 4Kx2K(600MHz)
DC/5V
DC/5V
HDMI Splitter 1x8 with Full 3D and 4Kx2K(600MHz)
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
From HDMI™ Source Device
Up to 8x HDMI™ 4kx2k(600MHz) screens/displays
Led indicators
Power: Blue system power on + HDMI Input connected
HDMI outport(s): connection active
Power: Red system power on
Power: on/o switch Reset button
Use HDMI™ Cables that
support 4K or higher!
Use the Power Supply
that came with the CSV-1382
CSV-1383 QUICK INSTALLATION GUIDE
CSV-1383 QIG August-2023
Thank you for purchasing our CSV-1383 Product. After unpacking the product,
please make sure you have all the items provided and check for any damages.
In case of any missing/damaged parts please inform your supplier immediately.
You should have:
• Club 3D CSV-1383 1 to 8 HDMI™ Splitter
• Power Supply 100-240VAC/ 5V3A DC(Please Specify Plug type when ordering)
• QR Code for downloading the Quick Install Guide (QIG)
1 to 8 HDMI™ Splitter Full 3D and 4K60Hz(600MHz)
Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Products might obtain a certification during their lifetime. This doesn’t
change or alter the product specifications and/or performance in any way. Club 3D will provide the updated information on their website www. Club-3d.com at her discretion. Therefore Club 3D does not accept any rights claimed on the content of this document. Please
refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Copyright © 2023, Club 3D B.V. www.club-3d.com
The Club 3D CSV-1383 is a high-performance and small-sized 1 to 8 HDMI™ Ultra High
Definition Splitter with hot plug and iron casing. It distributes the input of the HDMI™
signal into eight identical outputs at the same time. It provides high performance audio
and video output through HDMI™ cables up to 4K@60Hz resolution and is capable of
receiving and transmitting up to 6Gbps/600MHz bandwidth.
This Splitter only splits the input signal to 8 output ports based on the input signals
specifications.
This is a high-performance and small-sized HDMI™ splitter in a metal housing with an
external Power Supply of 100-240VAC / 5V-3A DC, Power consumption(Max.) 11.3 Watt.
It’s an ideal assistant both at home and at work.
CONNECTION PROCEDURE
Make sure the Power switch is in
the OFF position !
1. Connect the HDMI™ video
source to the HDMI™ input of
the Splitter with one HDMI™
cable (HDMI™ cables are
optional)
2.) Connect the eight outputs of
the Splitter to eight displays
3. Turn on the power
4. In case of malfunction, try the
Reset button
This Splitter only splits the input
signal to 8 output ports based on
the input signals specifications.
It is NOT a converter ! So when
your input signal is 4K60Hz each
of the 8 outputs will be 4K60Hz
also and the same goes for input
1080p the 8 outputs will also be
1080p each!
• Warning Safe Usage – Product
Only to be used at altitude 2000
meters/6562 feet and below
Note:
- Please update your TV Firmware to the version which
supports these resolutions/refresh rates !
- Please update your Graphic drivers on your PC and
make sure that DSC1.2 is supported on your devices to
support the these resolutions/refresh rates!
Please use one of our Extension/Adapter cables to
connect to your devices: In case you need assistance to
choose the correct cable, please visit our website www.
club-3d.com or feel free to mail us at support@club-3d.
com and it will be our pleasure to assist you.