2. Classic Exhibits
  3. FT-08

Classic Exhibits FT-08 Setup Instructions

  • Hello! I've reviewed the setup instructions for the Intro Folding Panel System FT-08 Table Top Display. This document outlines how to assemble your display including the folding panels, lighting unit, header frame, and header graphic. I'm ready to answer any questions you have about setting up your display.
  • How do I begin setup?
    Where do I attach the lighting unit?
    How do I assemble the Header Frame?
    What is the last step?
© 2021
Order #57427
Locked layer contains
placeholder marks.
Intro Folding Panel System
5 Panel Table Top with Header Graphic
Stand panels up
Configure panels into
layout as shown
When assembled
Lighting Unit
Header Frame
Header Frame
Steps:
1) Remove folded panels from case. Stand panels
on table top and slowly unfold into configuration
shown.
2) Attach Lighting Unit at center of opened panels.
3) Assemble Header Frame. Slide horizontal
brackets into groove; tighten thumbscrews
to secure.
4) Set Graphic Header on top of assembled panels.
FT-08 Table Top Display
REV 9/2021
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS
/