2. DANLERS
  3. CESL

DANLERS CESL Installation guide

  • Hello! I've reviewed the installation notes for the DANLERS Ceiling Slave Relay CESL. This document provides details on how to install and connect the device. It includes information about wiring, connections, and the features of the slave relay. The device supports plug-in controls, offers isolated slave contacts, and requires a 230Vac supply. I'm ready to answer any specific questions you might have about this device based on the document.
  • What components are included in the ceiling slave relay?
    What voltage supply is required for the ceiling slave relay?
    What is the purpose of the slave contact?
installation notes
DANLERS
Advice from: Telephone +44 (0)1249 443377
Facsimile +44 (0)1249 443388
E-mail [email protected]
Web www.danlers.co.uk
Company Registered Number 2570169
VAT Registration Number 543 5491 38
Danlers Limited,
Vincients Road,
Bumpers Farm Ind. Est.,
CHIPPENHAM,
Wiltshire,
SN14 6NQ,
United Kingdom.
INS 655 - Instructions CESL.PMD\106/04/05
CESL ceiling slave relay box
The ceiling slave relay comprises a socket, box, relay and terminal block.
Read the installation notes for the plug-in control to be used.
Turn off the mains and if in doubt, please consult a qualified electrician.
The box must be sited to suit the plug-in control.
A 230Vac supply must be provided to terminals L1 and N.
Any of the DANLERS ceiling controls may be plugged in to the socket which then provides the
following benefits:-
A. The plug-in control may still control a circuit by connecting a load to SL1.
B. As the slave contact is isolated any AC or DC voltage supply up to 230V may be connected
to C2.
The wiring diagram is as follows:-
L A N E
SLAVE RELAY 6A
L1 N
Versions with extra relays can be made to special order.
230VAC supply
C2 SL1
CONNECTOR
BLOCK
KLIK SOCKET 6A
PLUG-IN CONTROL
SL2
N/O
SL2
N/C
/