Supermicro MBD-X7SPA-H-O User manual

X7SPA-L

USER’S MANUAL

Revision 1.0c

X7SPA-H

X7SPA-HF

Manual Revision 1.0c

Release Date: April 7, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manu al is written for syste m integr a tors, PC technic i ans and

knowledgeable PC users. It provides information for the installation and use of the

X7SPA-L/X7SPA-H/X7SPA-HF motherboard.

About This Motherboard

The X7SPA-L comes integrated with the single-core Intel® ATOM

TM

D410 (1.66GHz,

11.6W) processor while the X7SPA-H/X7SPA-HF features the Intel ATOM D510

(Dual Core, 1.66GHz, 14.6W) processor. With memory support for up to 4 GB of

non-ECC, unbuffered 667 MHz DDR2 SO-DIMMs in 2 sockets, 6 SATA ports, on-

board VGA, and up to 10 USB 2.0 ports, the X7SPA-L/X7SPA-H/X7SPA-HF delivers

cost-effective performance in a small form factor.

This product is intended to be professionally installed and serviced by a techni-

cian.

Manual Organization

Chapter 1 describes the features, specications and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Driver Installation Instructions.

Preface

iii

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Critical information to prevent damage to the components or

data loss.

Important: Important information given to ensure proper system installa-

tion or to relay safety precautions.

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

iv

Contacting Supermicro

v

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: support@supermicro.com.tw

Tel: 886-2-8228-1366, ext.132 or 139

vi

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

Table of Contents

Preface

About This Manual ........................................................................................................ 3

About This Motherboard ................................................................................................ 3

Manual Organization ..................................................................................................... 3

Conventions Used in the Manual: ................................................................................. 4

Contacting Supermicro .................................................................................................. 5

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist .......................................................................................................... 1-1

X7SPA-L Image ........................................................................... 1-2

X7SPA-H Image .......................................................................... 1-3

X7SPA-HF Image ........................................................................ 1-4

Motherboard Layout ........................................................................................ 1-5

X7SPA-L/X7SPA-H/X7SPA-HF Quick Reference ........................................... 1-6

Motherboard Features ................................................................................... 1-9

X7SPA Series Block Diagram ........................................................................1-11

1-2 Chipset Overview ......................................................................................... 1-12

I/O Controller Hub: ICH9R (X7SPA-H & X7SPA-HF) ................................... 1-12

I/O Controller Hub: ICH9 (X7SPA-L) ............................................................. 1-12

1-3 PC Health Monitoring .................................................................................... 1-13

Recovery from AC Power Loss ..................................................................... 1-13

Onboard Voltage Monitoring ........................................................................ 1-13

Fan Status Monitor with Software ................................................................. 1-13

CPU Overheat LED and Control .................................................................. 1-13

1-4 Power Conguration Settings........................................................................ 1-14

Slow Blinking LED for Suspend-State Indicator ........................................... 1-14

BIOS Support for USB Keyboard.................................................................. 1-14

Main Switch Override Mechanism ................................................................ 1-14

1-5 Power Supply ................................................................................................ 1-14

1-6 Super I/O ....................................................................................................... 1-15

1-7 Overview of the Nuvoton BMC Controller (X7SPA-HF only) ........................ 1-15

1-8 LVDS (X7SPA-L only).................................................................................... 1-16

Chapter 2 Installation

2-1 Static-Sensitive Devices .................................................................................. 2-1

Precautions ..................................................................................................... 2-1

Unpacking ....................................................................................................... 2-1

vii

Table of Contents

Tools Needed .................................................................................................. 2-2

Location of Mounting Holes ............................................................................ 2-2

2-2 Motherboard Installation .................................................................................. 2-2

Installation Instructions .................................................................................... 2-3

2-3 System Memory .............................................................................................. 2-4

How to Install SO DIMMs ............................................................................... 2-4

Memory Support .............................................................................................. 2-4

The SO DIMM Socket ..................................................................................... 2-5

2-4 Connectors/I/O Ports ....................................................................................... 2-6

Back Panel Connectors and I/O Ports ............................................................ 2-6

ATX PS/2 Keyboard and PS/2 Mouse Ports .............................................. 2-7

Universal Serial Bus (USB) ........................................................................ 2-8

Serial Ports ................................................................................................. 2-9

VGA Connector ........................................................................................ 2-10

LAN Ports / IPMI (X7SPA-HF) ..................................................................2-11

Front Control Panel ....................................................................................... 2-12

JF1 Header Pins ...................................................................................... 2-12

Front Control Panel Pin Denitions............................................................... 2-13

Power LED .............................................................................................. 2-13

HDD LED .................................................................................................. 2-13

NIC1/NIC2 LED Indicators ....................................................................... 2-13

Overheat (OH)/Fan Fail LED.................................................................... 2-14

Power Fail LED ........................................................................................ 2-14

Reset Button ........................................................................................... 2-15

Power Button ........................................................................................... 2-15

NMI Button .............................................................................................. 2-15

2-5 Connecting Cables ........................................................................................ 2-16

ATX Main PWR & CPU PWR Connectors .............................................. 2-16

External Power Connector ...................................................................... 2-16

Fan Headers ............................................................................................. 2-17

Overheat/Fan Fail LED (JOH) .................................................................. 2-18

Front Panel Audio Header ........................................................................ 2-18

Chassis Intrusion ..................................................................................... 2-19

SATA DOM Power .................................................................................... 2-19

Power SMB I

2

C Connector ...................................................................... 2-19

CD Header .............................................................................................. 2-20

SMB .......................................................................................................... 2-20

T-SGPIO 0/1 Headers .............................................................................. 2-20

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

viii

LVDS Connector ....................................................................................... 2-21

Inverter Power Connector ........................................................................ 2-21

2-6 Jumper Settings ............................................................................................ 2-22

Explanation of Jumpers ............................................................................ 2-22

LAN Port Enable/Disable ......................................................................... 2-23

SMB (I

2

C) Bus to PCI Slots...................................................................... 2-23

CMOS Clear ............................................................................................. 2-24

USB Wake-Up ......................................................................................... 2-25

TPM Support Enable ................................................................................ 2-26

Watch Dog Enable/Disable ...................................................................... 2-26

COM3 Redirection Select ......................................................................... 2-26

Power LED/Speaker ................................................................................. 2-27

BMC (X7SPA-HF Only) ........................................................................... 2-27

VGA Enable ............................................................................................. 2-28

HDA/AC97 Select .................................................................................... 2-28

Power Force On Enable/Disable .............................................................. 2-29

DCD / P5V Select .................................................................................. 2-29

2-7 Onboard Indicators ........................................................................................ 2-30

LAN Port LEDs ......................................................................................... 2-30

2-8 Serial ATA and HDD Connections ................................................................. 2-31

SATA Connectors ..................................................................................... 2-31

Chapter 3 Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On ............................................................................................ 3-1

No Power ........................................................................................................ 3-1

No Video ......................................................................................................... 3-1

Memory Errors ............................................................................................... 3-2

Losing the System’s Setup Conguration ....................................................... 3-2

3-2 Technical Support Procedures ........................................................................ 3-2

3-3 Frequently Asked Questions ........................................................................... 3-3

3-4 Returning Merchandise for Service................................................................. 3-5

Chapter 4 BIOS

4-1 Introduction ...................................................................................................... 4-1

Starting BIOS Setup Utility .............................................................................. 4-1

How To Change the Conguration Data ......................................................... 4-1

How to Start the Setup Utility ......................................................................... 4-2

4-2 Main Setup ...................................................................................................... 4-2

4-3 Advanced Setup Congurations...................................................................... 4-4

4-4 Security Settings ........................................................................................... 4-20

4-5 Boot Settings ................................................................................................4-22

4-6 Exit Options ................................................................................................... 4-23

Appendix A POST Error Beep Codes

Recoverable POST Error Beep Codes ......................................................................A-1

Appendix B Software Installation Instructions

B-1 Installing Drivers ..............................................................................................B-1

B-2 Conguring Supero Doctor III .........................................................................B-2

Table of Contents

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the retail box only.

One (1) Supermicro Mainboard•

Two (2) SATA cables (CBL-0044L)•

One (1) I/O shield (MCP-260-00003-00) •

One (1) Supermicro CD containing drivers and utilities (CDR-X7-UP)•

One (1) User's/BIOS Manual (MNL-1166)•

1-2

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

X7SPA-L Image

Note: All graphics shown in this manual were based upon the latest PCB Revision

available at the time of publishing of the manual. The motherboard you've received

may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction

1-3

X7SPA-H Image

Note: All graphics shown in this manual were based upon the latest PCB Revision

available at the time of publishing of the manual. The motherboard you've received

may or may not look exactly the same as the graphics shown in this manual.

1-4

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

X7SPA-HF Image

Note: All graphics shown in this manual were based upon the latest PCB Revision

available at the time of publishing of the manual. The motherboard you've received

may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction

1-5

Motherboard Layout

Important Notes to the User

Jumpers not indicated are for testing only. •

See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front •

panel connections.

" " indicates the location of "Pin 1". •

MH2

MH3MH4

D17

JPW1

JUSB1

JD1

JPC3

JPUSB1

JWD1

JPG1

JBMC1

JPL1

JPT1

JPL2

JDIMM2

1

JDIMM1

JI2C2

JI2C1

JOH1

JL1

JL2

SP1

+

J2

J3

JBT1

JBAT 1

JPCIE1

JUSB5

JUSB4

JUSB3

JUSB2

JLPC80

R1050

JSMB1

FAN1 FAN2

JCOM2

JCOM4

JPI2C1

JWF1

J8

JVGA1

CD1

JPB

FA N

FAN

COMS CLEAR

2-3 DISABLE

1-2 ENABLE

JPB:BMC ENABLE/DISABLE

CD-in

JPT1:TPM ENABLE/DISABLE

1-2 ENABLE

2-3 DISABLE

AUDIO FP

T-SGPIO2

T-SGPIO1

JPI2C:PWR I2C

JSMB1:SMBus1

JPUSB1:USB WAKE UP

2-3 DISABLE

1-2 ENABLE

JWF1:DOM PWR

JD1:1-3 PWR LED

4-7 SPEAKER

ON:ENABLEJI2C2

OFF:DISABLE

JI2C1

OFF:DISABLE

ON:ENABLE

JL2:AUDIO FRONT PANEL SELECT

ON:AC'97 FRONT PANEL

OFF:HD AUDIO FRONT PANEL

JPG1:VGA

2-3 DISABLE

1-2 ENABLE

2-3 DISABLE

JPL2:1-2 ENABLE

JPL1:1-2 ENABLE

2-3 DISABLE

JL1:CHASISS INTRUSION

JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI

2-3 NMI

JWD1:1-2 RST

JBT1:

LAN2

LAN1

I-SATA 5

I-SATA 2

I-SATA 4

I-SATA 1

I-SATA 3

I-SATA 0

SLOT1 PCI-E X4 (IN X16 SLOT)

SYS

CPU

KB/MOUSE

COM4

COM3

COM2

COM1

SODIMM2

SODIMM1

CPU

REV:1.00

X7SPA-L

J6

J5

J10

J11

J12

J13

J14

JPF

1-6

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

MH2

MH3MH4

D17

JPW1

JUSB1

JD1

JPC3

JPUSB1

JWD1

JPG1

JBMC1

JPL1

JPT1

JPL2

JDIMM2

1

JDIMM1

JI2C2

JI2C1

JOH1

JL1

JL2

SP1

+

J2

J3

JBT1

JBAT 1

JPCIE1

JUSB5

JUSB4

JUSB3

JUSB2

JLPC80

R1050

JSMB1

FAN1 FAN2

JCOM2

JCOM4

JPI2C1

JWF1

J8

JVGA1

CD1

JPB

F A N

FAN

COMS CLEAR

2-3 DISABLE

1-2 ENABLE

JPB:BMC ENABLE/DISABLE

CD-in

JPT1:TPM ENABLE/DISABLE

1-2 ENABLE

2-3 DISABLE

AUDIO FP

T-SGPIO2

T-SGPIO1

JPI2C:PWR I2C

JSMB1:SMBus1

JPUSB1:USB WAKE UP

2-3 DISABLE

1-2 ENABLE

JWF1:DOM PWR

JD1:1-3 PWR LED

4-7 SPEAKER

ON:ENABLEJI2C2

OFF:DISABLE

JI2C1

OFF:DISABLE

ON:ENABLE

JL2:AUDIO FRONT PANEL SELECT

ON:AC'97 FRONT PANEL

OFF:HD AUDIO FRONT PANEL

JPG1:VGA

2-3 DISABLE

1-2 ENABLE

2-3 DISABLE

JPL2:1-2 ENABLE

JPL1:1-2 ENABLE

2-3 DISABLE

JL1:CHASISS INTRUSION

JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI

2-3 NMI

JWD1:1-2 RST

JBT1:

LAN2

LAN1

I-SATA 5

I-SATA 2

I-SATA 4

I-SATA 1

I-SATA 3

I-SATA 0

SLOT1 PCI-E X4 (IN X16 SLOT)

SYS

CPU

KB/MOUSE

COM4

COM3

COM2

COM1

SODIMM2

SODIMM1

CPU

REV:1.00

X7SPA-L

J6

J5

J10

J11

J12

J13

J14

JPF

9

5

4

3

10

11

8

7

6

1

2

12

14

15

16

18

19

23

24

25

26

27

28

29

30

31

45

50

13

32

33

41

42

43

44

X7SPA-L/X7SPA-H/X7SPA-HF Quick Reference

17

20 21

22

343536

Note 1: USB 3/4, COM3/4 are available on the X7SPA-L only. LAN2 and

SATA 2/3 are available on the X7SPA-H/X7SPA-HF only.

Note 2: Jumpers that are not indicated are used for factory testing only.

1

37

1

38

1

39

1

40

47

46

49

48

51

52

53

Chapter 1: Introduction

1-7

Number Connectors Description

1 KB/Mouse PS/2 Keyboard/Mouse

2, 3 USB 1/2, USB 3/4 Back Panel USB Ports (USB 3/4: X7SPA-L only)

4 COM1 Back Panel Serial Port

5 VGA

Video/Graphics Connector

6 LAN1 RJ45 Connector for LAN1

7 LAN2 RJ45 Connector for LAN2 (X7SPA-H/X7SPA-HF only)

8 J5 Front Panel Audio Header Connector

10 CD1 CD/DVD Drive Audio Input Header

15 JL1 Chassis Intrusion Header

18 JBAT1 Onboard Battery

19 JPCIE1 PCI-E 1.1 x4 Gen1 (in x16 physical) Slot

20, 21, 23 USB 5/6, 7/8, 9 Front Panel USB headers

22 USB 10 Type A on-board USB Port

25 JOH Overheat Warning LED header

26 J8 Power Connector for Add-on devices

27 SATA 0,1,2,3,4,5 SATA Connectors (SATA 2/3: X7SPA-H/X7SPA-HF only)

29 JWF1 SATA Disk on Module (DOM) Power

30 T-SGPIO-0/1 Serial General Purpose IO headers (for SATA)

31 JF1 FP Control Panel Header

32 JD1

External Buzzer/Speaker/Power LED

Pins 1-3 (Power LED), Pins 4-7 (External Speaker)

33 JPI2C PWR supply (I

2

C) System Management Bus

34 JPW1 ATX 24-Pin Power Connector

35 Unused Factory Test Point

36 JSMB1 System Management Bus header

38, 37 Fans 1, 2 Fan 1: CPU Fan, Fan 2: Chassis Fan Header

39, 40, 41 COM2, COM4, COM3 Serial Port 2, 4 and 3 Headers (COM 3/4 X7SPA-L only)

45 SPK Onboard Speaker/Buzzer

48 J5 18-bpp LVDS LCD Monitor Port

49 J6 Inverter Connector

50 DIMM 1, DIMM 2 SO-DIMM Memory Slots

51 J7 4-Pin ATX Power Connector

X7SPA-L/X7SPA-H/X7SPA-HF Ports and Connectors

1-8

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

Number Jumper Description Default Setting

9 JL2

AC97/HD Audio Selector

(Front Panel)

Open (HD Audio)

Closed (AC97)

12, 11 JI

2

C1/JI

2

C2 SMB to PCI Slots Open/Open (Disabled)

13 JPL2 LAN2 Enable/Disable Pins 1-2 (Enabled)

14 JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)

16 JPG1

On-board VGA Enable/Disable

(X7SPA-HF only)

Pins 1-2 (Enabled, use

on-board VGA device)

Pins 2-3 (Disabled, use

add-on VGA card)

17 JPB BMC Enable/Disable (X7SPA-HF only)

Pins 1-2 (Enabled)

Pins 2-3 (Disabled)

24 JPUSB1 USB Wake-up Enable Pins 1-2 (Enabled)

28 JWD1 Watch Dog Timer

Pins 1-2 (Reset)

42 JPT1 Trusted Platform Module Enable

Pins 1-2 (Enabled)

Pins 2-3 (Disabled)

43 JPC3

COM3 Selection (OEM option for the

X7SPA-H/X7SPA-HF only)

Pins 1-2 (RS232)

Pins 2-3 (TTL)

44 JBT1 CMOS Clear (See Chapter 2)

46 J12/J13

Pin 1 DCD/P5V Select (COM3/COM4)

(OEM option for the X7SPA-H/X7SPA-

HF only)

Pins 1-2 (DCD )

Pins 2-3 (P5V)

47 J10/J11

Pin 1 DCD/P5V Select (COM1/COM2)

(OEM option for the X7SPA-H/X7SPA-

HF only)

Pins 1-2 (DCD)

Pins 2-3 (P5V)

52 JPF Power Force On Open (Disabled)

53 J14 Reserved (Unused) Reserved (Unused)

Model USB Serial LAN Audio LVDS SATA IPMI RAID

X7SPA-L

4 (rear)

1 (type A)

5 (header)

1 (rear)

3 (header)

LAN1

Front

Panel

Header

1 4 No No

X7SPA-H

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6 No 0, 1, 5, 10

X7SPA-HF

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6

Yes (shared

on LAN1)

0, 1, 5, 10

X7SPA-L/X7SPA-H/X7SPA-HF Jumper Descriptions

X7SPA-L/X7SPA-H/X7SPA-HF Features

Model CPU Chipset VGA Graphics

X7SPA-L Intel ATOM D410 Intel ICH9 Intel Graphics Media Accelerator GMA3150

X7SPA-H Intel ATOM D510 Intel ICH9R Intel Graphics Media Accelerator GMA3150

X7SPA-HF Intel ATOM D510 Intel ICH9R Matrox G200eW Graphics Accelerator

Chapter 1: Introduction

1-9

Motherboard Features

Processor

X7SPA-L: Single Integrated Intel® ATOM™ D410 processor, 1.66 GHz, 11.6 Watts,

512KB L2 cache

X7SPA-H/X7SPA-HF: Single Integrated Dual-Core Intel® ATOM™ D510 processor,

1.66 GHz, 14.6 Watts, 2 x 512KB L2 cache

Memory

Supports up to 4GB of unbuffered 667MHz Non-ECC DDR2 SO-DIMMs in 2 •

sockets (1.8V, 256MB, 512MB, 1GB, 2GB)

Chipset

Intel® ICH9/9R (South Bridge)•

Integrated Graphics

Intel Graphics Media Accelerator GMA3150 (X7SPA-L/X7SPA-H only)•

Matrox G200eW Graphics Accelerator (X7SPA-HF only)•

Expansion Slots

One (1) PCI-E 1.1 x4 Gen1 (in x16 physical) slot•

BIOS

32 Mb AMI BIOS•

®

, SPI Flash BIOS

PC Health Monitoring

Onboard voltage monitors for CPU Cores, Chipset Voltage, Memory Voltage •

+1.8V, +3.3V, +5V, +/- 12V, +3.3V standby, +5V standby, VBat, HT

Tachometer monitoring •

Status monitor for speed control, on/off control•

Supports 3-pin fans (w/o speed control)•

Low-noise fan speed control•

Temperature monitor for chassis, CPU environments•

CPU thermal trip support•

Supero Doctor III, Watch Dog/NMI•

CPU/System overheat LED, Suspend state LED•

PowerConguration

ACPI/ACPM Power Management

•

Wake-On-Ring, Wake-On-LAN headers•

Keyboard wake-up from soft off•

CPU fan auto-off in sleep mode•

Power on mode for AC power recovery•

1-10

X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual

I/O Controllers and Ports

Built-in ICH9/9R SATA Controller •

Winbond Super I/O controller 83627DHG-P •

Realtek ALC888-VC2-GR HD Audio•

One PS/2 mouse and one PS/2 keyboard port•

One back panel VGA port•

X7SPA-L Only

4 SATA connectors for 4 devices•

Single 10/100/1000 LAN (Intel 82574L)•

Four Fast 16550-compatible UART serial ports (one on back panel, three •

internal headers)

Ten (10) USB 2.0 ports & headers (USB1~USB10): Four ports on the back •

panel, ve USB headers for front panel access, and one on-board Type A

USB port.

Front panel HD audio header, 18-bpp LVDS connector•

Optimized for the Supermicro 1U SC512 & SC731 chassis.•

X7SPA-H Only

6 SATA connectors for 6 devices (with support for RAID 0, RAID 1, RAID •

10 and RAID 5 in the Windows OS environment)

Dual 10/100/1000 LAN (Intel 82574L)•

Two Fast UART 16550-compatible serial ports (one back panel, one •

header)

Eight (8) USB 2.0 ports & headers (USB1/2, USB5~10): Two ports on the •

back panel, ve USB headers for front panel access, and one on-board

Type A USB port.

Optimized for the Supermicro 1U (502, 503, 510, 512) & SC731 chassis.•

X7SPA-HF Only

All the features of the X7SPA-H•

Nuvoton WPCM450 BMC (Integrated IPMI 2.0, shared with LAN1)•

Other

Chassis Intrusion Header and Detection

•

Lead free•

CD Utilities

BIOS ash upgrade utility, Drivers and utilities for Intel® ICH9/9R chipset

•

Dimensions

Mini ITX form factor, 6.75" x 6.75" •

Chapter 1: Introduction

1-11

X7SPA Series Block Diagram

Note: This is a general block diagram. Please see the Motherboard Features pages

for details on the features of the motherboard.

*SC/DC

Intel ATOM

SODIMM 1

SODIMM 2

DDR2 667

VGA

LVDS

Connector

Intel

ICH9 (X7SPA-L)

ICH9R (X7SPA-H/HF)

DMI

Intel 82574L

GbE(LAN2)

Intel 82574L

GbE(LAN1)

PCI-E x1

PCI-E x4

PCI-E x16

Slot

RJ45

MDI

RMII

X7SPA Series

LPC

SATA GEN2

*x4/x6

USB 2.0 x10

WPCM450

BMC**

HD AU DIO

128MB

DDR2

PCI 33

USB x2

SDRAM

W83627DHG

SIO

IT8760E

LPC I/O

KB/MS

CONN

COM 1

CONN

COM 2

Header

COM 3

Header

COM 4

Header

ALC888

CODEC

FP

Header

SATA Port 4

*D410/D510

SATA Port 2

SATA Port 1

SATA Port 3

SATA Port 5

SATA Port 6

USB

Vertical

CONN x1

USB

Headerx3

(5Ports)

USB

Rear

CONN

*x4/x2

BLOCK DIAGRAM

PRT

PORT

12V DC PSU

4-PIN CONN

SLB9635TT_1.2

TPM

FROM BMC

ATX PSU

24PIN CONN

X7SPA-HF Only

**No BMC Installed on the

X7SPA-L or X7SPA-H

X7SPA-H/X7SPA-HF Only

X7SPA-H/

X7SPA-HF

Only

X7SPA-L Only

Factory

Option

Factory

Option

*x4

X7SPA-L

Only

Page is loading ...

Supermicro MBD-X7SPA-H-O User manual

Supermicro MBD-X7SPA-H-O User manual

Related papers

Other documents